Merge tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/swarren/linux-tegra into next/cleanup

ARM: tegra: switch to dmaengine

The Tegra code-base has contained both a legacy DMA and a dmaengine
driver since v3.6-rcX. This series flips Tegra's defconfig to enable
dmaengine rather than the legacy driver, and removes the legacy driver
and all client code.

* tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ASoC: tegra: remove support of legacy DMA driver based access
  spi: tegra: remove support of legacy DMA driver based access
  ARM: tegra: apbio: remove support of legacy DMA driver based access
  ARM: tegra: dma: remove legacy APB DMA driver
  ARM: tegra: config: enable dmaengine based APB DMA driver
  + sync to 3.6-rc6

Documentation/i2c/busses/i2c-i801

@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

MAINTAINERS

@@ -3387,7 +3387,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.fluff.org/bjdooks/linux.git
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig.debug

@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

arch/arm/Makefile

@@ -283,10 +283,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

arch/arm/boot/compressed/head.S

@@ -659,10 +659,14 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

arch/arm/configs/tegra_defconfig

@@ -145,6 +145,8 @@ CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y

arch/arm/include/asm/assembler.h

@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/memory.h

@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.

arch/arm/include/asm/tlb.h

@@ -199,13 +199,17 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
 	 */
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }

arch/arm/include/asm/uaccess.h

@@ -101,71 +101,97 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
-#define get_user(x,p)							\
+#define __get_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
 		x = (typeof(*(p))) __r2;				\
 		__e;							\
 	})
 
+#define get_user(x,p)							\
+	({								\
+		might_fault();						\
+		__get_user_check(x,p);					\
+	 })
+
 extern int __put_user_1(void *, unsigned int);
 extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define put_user(x,p)							\
+#define __put_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\
 		__e;							\
 	})
 
+#define put_user(x,p)							\
+	({								\
+		might_fault();						\
+		__put_user_check(x,p);					\
+	 })
+
 #else /* CONFIG_MMU */
 
 /*
@@ -219,6 +245,7 @@ do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
@@ -300,6 +327,7 @@ do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
 	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\

arch/arm/kernel/hw_breakpoint.c

@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 		/* Aligned */
 		break;
 	case 1:
-		/* Allow single byte watchpoint. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-			break;
 	case 2:
 		/* Allow halfword watchpoints and breakpoints. */
 		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
 			break;
+	case 3:
+		/* Allow single byte watchpoint. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+			break;
 	default:
 		ret = -EINVAL;
 		goto out;
@@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;

arch/arm/kernel/traps.c

@@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",

arch/arm/lib/delay.c

@@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq)
 {
 	pr_info("Switching to timer-based delay loop\n");
 	lpj_fine			= freq / HZ;
+	loops_per_jiffy			= lpj_fine;
 	arm_delay_ops.delay		= __timer_delay;
 	arm_delay_ops.const_udelay	= __timer_const_udelay;
 	arm_delay_ops.udelay		= __timer_udelay;