Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits)
  ALSA: hda - Disable sticky PCM stream assignment for AD codecs
  ALSA: usb - Creative USB X-Fi volume knob support
  ALSA: ca0106: Use card specific dac id for mute controls.
  ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.
  ALSA: ca0106: Create a nice spot for mapping channels to dacs.
  ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.
  ALSA: ca0106: Pull out dac powering routine into separate function.
  ALSA: ca0106 - add Sound Blaster 5.1vx info.
  ASoC: tlv320dac33: Use usleep_range for delays
  ALSA: usb-audio: add Novation Launchpad support
  ALSA: hda - Add workarounds for CT-IBG controllers
  ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs
  ASoC: tpa6130a2: Error handling for broken chip
  ASoC: max98088: Staticise m98088_eq_band
  ASoC: soc-core: Fix codec->name memory leak
  ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066
  ALSA: hda - Add some workarounds for Creative IBG
  ALSA: hda - Fix wrong SPDIF NID assignment for CA0110
  ALSA: hda - Fix codec rename rules for ALC662-compatible codecs
  ALSA: hda - Add alc_init_jacks() call to other codecs
  ...

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
            control correctly. If you have problems regarding this, try
            another ALSA compliant mixer (alsamixer works).
 
+  Module snd-azt1605
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
+  Module snd-azt2316
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
   Module snd-aw2
   --------------
 
@@ -1641,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
 
-  Module snd-sgalaxy
-  ------------------
-
-    Module for Aztech Sound Galaxy sound card.
-
-    sbport	- Port # for SB16 interface (0x220,0x240)
-    wssport	- Port # for WSS interface (0x530,0xe80,0xf40,0x604)
-    irq		- IRQ # (7,9,10,11)
-    dma1	- DMA #
-
-    This module supports multiple cards.
-
-    The power-management is supported.
-
   Module snd-sscape
   -----------------
 

Documentation/sound/alsa/HD-Audio.txt

@@ -57,9 +57,11 @@ dead.  However, this detection isn't perfect on some devices.  In such
 a case, you can change the default method via `position_fix` option.
 
 `position_fix=1` means to use LPIB method explicitly.
-`position_fix=2` means to use the position-buffer.  0 is the default
-value, the automatic check and fallback to LPIB as described in the
-above.  If you get a problem of repeated sounds, this option might
+`position_fix=2` means to use the position-buffer.
+`position_fix=3` means to use a combination of both methods, needed
+for some VIA and ATI controllers.  0 is the default value for all other
+controllers, the automatic check and fallback to LPIB as described in
+the above.  If you get a problem of repeated sounds, this option might
 help.
 
 In addition to that, every controller is known to be broken regarding

arch/arm/mach-davinci/devices.c

@@ -295,6 +295,18 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
+struct platform_device davinci_pcm_device = {
+	.name		= "davinci-pcm-audio",
+	.id		= -1,
+};
+
+static void davinci_init_pcm(void)
+{
+	platform_device_register(&davinci_pcm_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
 struct davinci_timer_instance davinci_timer_instance[2] = {
 	{
 		.base		= DAVINCI_TIMER0_BASE,
@@ -315,6 +327,7 @@ static int __init davinci_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
+	davinci_init_pcm();
 	davinci_init_wdt();
 
 	return 0;

arch/arm/mach-ep93xx/core.c

@@ -776,9 +776,15 @@ static struct platform_device ep93xx_i2s_device = {
 	.resource	= ep93xx_i2s_resource,
 };
 
+static struct platform_device ep93xx_pcm_device = {
+	.name		= "ep93xx-pcm-audio",
+	.id		= -1,
+};
+
 void __init ep93xx_register_i2s(void)
 {
 	platform_device_register(&ep93xx_i2s_device);
+	platform_device_register(&ep93xx_pcm_device);
 }
 
 #define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
@@ -826,6 +832,40 @@ void ep93xx_i2s_release(void)
 }
 EXPORT_SYMBOL(ep93xx_i2s_release);
 
+/*************************************************************************
+ * EP93xx AC97 audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_ac97_resources[] = {
+	{
+		.start	= EP93XX_AAC_PHYS_BASE,
+		.end	= EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EP93XX_AACINTR,
+		.end	= IRQ_EP93XX_AACINTR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_ac97_device = {
+	.name		= "ep93xx-ac97",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_ac97_resources),
+	.resource	= ep93xx_ac97_resources,
+};
+
+void __init ep93xx_register_ac97(void)
+{
+	/*
+	 * Make sure that the AC97 pins are not used by I2S.
+	 */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
+
+	platform_device_register(&ep93xx_ac97_device);
+	platform_device_register(&ep93xx_pcm_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -105,6 +105,7 @@
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 #define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
+#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
 #define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -61,6 +61,7 @@ void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_register_i2s(void);
 int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
 void ep93xx_i2s_release(void);
+void ep93xx_register_ac97(void);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;

arch/arm/mach-ep93xx/simone.c

@@ -61,6 +61,7 @@ static void __init simone_init_machine(void)
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
+	ep93xx_register_ac97();
 }
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")

arch/arm/mach-kirkwood/common.c

@@ -903,10 +903,16 @@ static struct platform_device kirkwood_i2s_device = {
 	},
 };
 
+static struct platform_device kirkwood_pcm_device = {
+	.name		= "kirkwood-pcm-audio",
+	.id		= -1,
+};
+
 void __init kirkwood_audio_init(void)
 {
 	kirkwood_clk_ctrl |= CGC_AUDIO;
 	platform_device_register(&kirkwood_i2s_device);
+	platform_device_register(&kirkwood_pcm_device);
 }
 
 /*****************************************************************************

arch/arm/mach-omap1/devices.c

@@ -25,6 +25,7 @@
 #include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
+#include <plat/mcbsp.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -195,6 +196,30 @@ static inline void omap_init_spi100k(void)
 
 static inline void omap_init_sti(void) {}
 
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
+};
+
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+
+static void omap_init_audio(void)
+{
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (!cpu_is_omap7xx())
+		platform_device_register(&omap_mcbsp3);
+	platform_device_register(&omap_pcm);
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -227,6 +252,7 @@ static int __init omap1_init_devices(void)
 	omap_init_rtc();
 	omap_init_spi100k();
 	omap_init_sti();
+	omap_init_audio();
 
 	return 0;
 }

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
+#include <sound/tlv320aic3x.h>
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
@@ -689,7 +690,6 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 };
 
 
-
 static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -710,10 +710,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vio			= &rx51_vio,
 };
 
-static struct aic3x_pdata rx51_aic3x_data __initdata = {
-	.gpio_reset		= 60,
-};
-
 static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
 	.id			= TPA6130A2,
 	.power_gpio		= 98,
@@ -728,6 +724,17 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	},
 };
 
+/* Audio setup data */
+static struct aic3x_setup_data rx51_aic34_setup = {
+	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
+	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
+};
+
+static struct aic3x_pdata rx51_aic3x_data = {
+	.setup = &rx51_aic34_setup,
+	.gpio_reset = 60,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -26,6 +26,8 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
+#include <mach/board-zoom.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
@@ -238,6 +240,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	return 0;
 }
 
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
 
 static int zoom_batt_table[] = {
 /* 0 C*/
@@ -307,6 +314,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
 
 static int __init omap_i2c_init(void)
 {
+	if (machine_is_omap_zoom2()) {
+		zoom_audio_data.ramp_delay_value = 3;	/* 161 ms */
+		zoom_audio_data.hs_extmute = 1;
+		zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+	}
 	omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
 			ARRAY_SIZE(zoom_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);