---

yaml
---
r: 169470
b: refs/heads/master
c: d9b2002
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c3b32fcbc7f4fd9a9b84718b991b175b0fd53f8c
+refs/heads/master: d9b2002c406011164f245de7a81304625989f1c9

trunk/Documentation/ABI/stable/sysfs-class-backlight

@@ -0,0 +1,36 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL

trunk/Documentation/ABI/testing/sysfs-class-lcd

@@ -0,0 +1,23 @@
+What:		/sys/class/lcd/<lcd>/lcd_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control LCD power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+
+What:		/sys/class/lcd/<lcd>/contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Current contrast of this LCD device. Value is between 0 and
+		/sys/class/lcd/<lcd>/max_contrast.
+
+What:		/sys/class/lcd/<lcd>/max_contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum contrast for this LCD device.

trunk/Documentation/ABI/testing/sysfs-class-led

@@ -0,0 +1,28 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the brightness of the LED. Most LEDs don't
+		have hardware brightness support so will just be turned on for
+		non-zero brightness settings. The value is between 0 and
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/max_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness level for this led, default is 255 (LED_FULL).
+
+What:		/sys/class/leds/<led>/trigger
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the trigger for this LED. A trigger is a kernel based source
+		of led events.
+		You can change triggers in a similar manner to the way an IO
+		scheduler is chosen. Trigger specific parameters can appear in
+		/sys/class/leds/<led> once a given trigger is selected.
+

trunk/Documentation/ABI/testing/sysfs-gpio

@@ -19,6 +19,7 @@ Description:
 	/gpioN ... for each exported GPIO #N
 	    /value ... always readable, writes fail for input GPIOs
 	    /direction ... r/w as: in, out (default low); write: high, low
+	    /edge ... r/w as: none, falling, rising, both
 	/gpiochipN ... for each gpiochip; #N is its first GPIO
 	    /base ... (r/o) same as N
 	    /label ... (r/o) descriptive, not necessarily unique

trunk/Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -0,0 +1,52 @@
+What:		/sys/devices/platform/asus-laptop/display
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching. The value
+		is composed by 4 bits and defined as follow:
+		4321
+		|||`- LCD
+		||`-- CRT
+		|`--- TV
+		`---- DVI
+		Ex: - 0 (0000b) means no display
+		    - 3 (0011b) CRT+LCD.
+
+What:		/sys/devices/platform/asus-laptop/gps
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the gps device. 1 means on, 0 means off.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus-laptop/ledd
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Some models like the W1N have a LED display that can be
+		used to display several informations.
+		To control the LED display, use the following :
+		    echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+		where T control the 3 letters display, and DDD the 3 digits display.
+		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+
+What:		/sys/devices/platform/asus-laptop/bluetooth
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus-laptop/wlan
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus

trunk/Documentation/ABI/testing/sysfs-platform-eeepc-laptop

@@ -0,0 +1,50 @@
+What:		/sys/devices/platform/eeepc-laptop/disp
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching.
+		- 1 = LCD
+		- 2 = CRT
+		- 3 = LCD+CRT
+		If you run X11, you should use xrandr instead.
+
+What:		/sys/devices/platform/eeepc-laptop/camera
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc-laptop/cardr
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc-laptop/cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration.
+		On the Eee PC 1000H there are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+		On Eee PC 701 there is only 2 available clock configurations.
+		Available configuration are listed in available_cpufv file.
+		Reading this file will show the raw hexadecimal value which
+		is defined as follow:
+		| 8 bit | 8 bit |
+		    |       `---- Current mode
+		    `------------ Availables modes
+		For example, 0x301 means: mode 1 selected, 3 available modes.
+
+What:		/sys/devices/platform/eeepc-laptop/available_cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		List available cpufv modes.

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -568,7 +568,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 			<para>
 				The blocks in which the tables are stored are procteted against
 				accidental access by marking them bad in the memory bad block
-				table. The bad block table managment functions are allowed
+				table. The bad block table management functions are allowed
 				to circumvernt this protection.
 			</para>
 			<para>

trunk/Documentation/DocBook/scsi.tmpl

@@ -317,7 +317,7 @@
         <para>
           The SAS transport class contains common code to deal with SAS HBAs,
           an aproximated representation of SAS topologies in the driver model,
-          and various sysfs attributes to expose these topologies and managment
+          and various sysfs attributes to expose these topologies and management
           interfaces to userspace.
         </para>
         <para>

trunk/Documentation/Intel-IOMMU.txt

@@ -56,11 +56,7 @@ Graphics Problems?
 ------------------
 If you encounter issues with graphics devices, you can try adding
 option intel_iommu=igfx_off to turn off the integrated graphics engine.
-
-If it happens to be a PCI device included in the INCLUDE_ALL Engine,
-then try enabling CONFIG_DMAR_GFX_WA to setup a 1-1 map. We hear
-graphics drivers may be in process of using DMA api's in the near
-future and at that time this option can be yanked out.
+If this fixes anything, please ensure you file a bug reporting the problem.
 
 Some exceptions to IOVA
 -----------------------

trunk/Documentation/SubmittingPatches

@@ -183,7 +183,7 @@ the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
 a man-pages patch, or at least a notification of the change,
 so that some information makes its way into the manual pages.
 
-Even if the maintainer did not respond in step #4, make sure to ALWAYS
+Even if the maintainer did not respond in step #5, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey

trunk/Documentation/accounting/getdelays.c

@@ -116,7 +116,7 @@ static int create_nl_socket(int protocol)
 }
 
 
-int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
+static int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
 	     __u8 genl_cmd, __u16 nla_type,
 	     void *nla_data, int nla_len)
 {
@@ -160,7 +160,7 @@ int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
  * Probe the controller in genetlink to find the family id
  * for the TASKSTATS family
  */
-int get_family_id(int sd)
+static int get_family_id(int sd)
 {
 	struct {
 		struct nlmsghdr n;
@@ -190,7 +190,7 @@ int get_family_id(int sd)
 	return id;
 }
 
-void print_delayacct(struct taskstats *t)
+static void print_delayacct(struct taskstats *t)
 {
 	printf("\n\nCPU   %15s%15s%15s%15s\n"
 	       "      %15llu%15llu%15llu%15llu\n"
@@ -216,15 +216,15 @@ void print_delayacct(struct taskstats *t)
 	       (unsigned long long)t->freepages_delay_total);
 }
 
-void task_context_switch_counts(struct taskstats *t)
+static void task_context_switch_counts(struct taskstats *t)
 {
 	printf("\n\nTask   %15s%15s\n"
 	       "       %15llu%15llu\n",
 	       "voluntary", "nonvoluntary",
 	       (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
-void print_cgroupstats(struct cgroupstats *c)
+static void print_cgroupstats(struct cgroupstats *c)
 {
 	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
 		"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
@@ -235,7 +235,7 @@ void print_cgroupstats(struct cgroupstats *c)
 }
 
 
-void print_ioacct(struct taskstats *t)
+static void print_ioacct(struct taskstats *t)
 {
 	printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n",
 		t->ac_comm,