Merge branches '3.19/omapdss' and '3.19/simplefb' into fbdev

Merge fbdev topic branches.

Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt

@@ -0,0 +1,33 @@
+Sunxi specific Simple Framebuffer bindings
+
+This binding documents sunxi specific extensions to the simple-framebuffer
+bindings. The sunxi simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "allwinner,simple-framebuffer"
+- allwinner,pipeline, one of:
+  "de_be0-lcd0"
+  "de_be1-lcd1"
+  "de_be0-lcd0-hdmi"
+  "de_be1-lcd1-hdmi"
+
+Example:
+
+chosen {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	framebuffer@0 {
+		compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+		allwinner,pipeline = "de_be0-lcd0-hdmi";
+		clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			 <&ahb_gates 44>;
+		status = "disabled";
+	};
+};

Documentation/devicetree/bindings/video/simple-framebuffer.txt

@@ -1,8 +1,40 @@
 Simple Framebuffer
 
-A simple frame-buffer describes a raw memory region that may be rendered to,
-with the assumption that the display hardware has already been set up to scan
-out from that buffer.
+A simple frame-buffer describes a frame-buffer setup by firmware or
+the bootloader, with the assumption that the display hardware has already
+been set up to scan out from the memory pointed to by the reg property.
+
+Since simplefb nodes represent runtime information they must be sub-nodes of
+the chosen node (*). Simplefb nodes must be named "framebuffer@<address>".
+
+If the devicetree contains nodes for the display hardware used by a simplefb,
+then the simplefb node must contain a property called "display", which
+contains a phandle pointing to the primary display hw node, so that the OS
+knows which simplefb to disable when handing over control to a driver for the
+real hardware. The bindings for the hw nodes must specify which node is
+considered the primary node.
+
+It is advised to add display# aliases to help the OS determine how to number
+things. If display# aliases are used, then if the simplefb node contains a
+"display" property then the /aliases/display# path must point to the display
+hw node the "display" property points to, otherwise it must point directly
+to the simplefb node.
+
+If a simplefb node represents the preferred console for user interaction,
+then the chosen node's stdout-path property should point to it, or to the
+primary display hw node, as with display# aliases. If display aliases are
+used then it should be set to the alias instead.
+
+It is advised that devicetree files contain pre-filled, disabled framebuffer
+nodes, so that the firmware only needs to update the mode information and
+enable them. This way if e.g. later on support for more display clocks get
+added, the simplefb nodes will already contain this info and the firmware
+does not need to be updated.
+
+If pre-filled framebuffer nodes are used, the firmware may need extra
+information to find the right node. In that case an extra platform specific
+compatible and platform specific properties should be used and documented,
+see e.g. simple-framebuffer-sunxi.txt .
 
 Required properties:
 - compatible: "simple-framebuffer"
@@ -14,13 +46,41 @@ Required properties:
   - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
   - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
+Optional properties:
+- clocks : List of clocks used by the framebuffer. Clocks listed here
+           are expected to already be configured correctly. The OS must
+           ensure these clocks are not modified or disabled while the
+           simple framebuffer remains active.
+- display : phandle pointing to the primary display hardware node
+
 Example:
 
-	framebuffer {
+aliases {
+	display0 = &lcdc0;
+}
+
+chosen {
+	framebuffer0: framebuffer@1d385000 {
 		compatible = "simple-framebuffer";
 		reg = <0x1d385000 (1600 * 1200 * 2)>;
 		width = <1600>;
 		height = <1200>;
 		stride = <(1600 * 2)>;
 		format = "r5g6b5";
+		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+		display = <&lcdc0>;
+	};
+	stdout-path = "display0";
+};
+
+soc@01c00000 {
+	lcdc0: lcdc@1c0c000 {
+		compatible = "allwinner,sun4i-a10-lcdc";
+		...
 	};
+};
+
+
+*) Older devicetree files may have a compatible = "simple-framebuffer" node
+in a different place, operating systems must first enumerate any compatible
+nodes found under chosen and then check for other compatible nodes.

MAINTAINERS

@@ -8442,6 +8442,14 @@ F:	drivers/media/usb/siano/
 F:	drivers/media/usb/siano/
 F:	drivers/media/mmc/siano/
 
+SIMPLEFB FB DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-fbdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/video/simple-framebuffer.txt
+F:	drivers/video/fbdev/simplefb.c
+F:	include/linux/platform_data/simplefb.h
+
 SH_VEU V4L2 MEM2MEM DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan

drivers/video/console/fbcon.c

@@ -3624,7 +3624,7 @@ static int __init fb_console_init(void)
 	return 0;
 }
 
-module_init(fb_console_init);
+fs_initcall(fb_console_init);
 
 #ifdef MODULE
 

drivers/video/fbdev/omap2/displays-new/connector-hdmi.c

@@ -170,98 +170,6 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 		return in->ops.hdmi->detect(in);
 }
 
-static int hdmic_audio_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* enable audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_enable(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-
-	return 0;
-}
-
-static void hdmic_audio_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_disable(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
-}
-
-static int hdmic_audio_start(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/*
-	 * No need to check the panel state. It was checked when trasitioning
-	 * to AUDIO_ENABLED.
-	 */
-	if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED)
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_start(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
-
-	return 0;
-}
-
-static void hdmic_audio_stop(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_stop(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-}
-
-static bool hdmic_audio_supported(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return false;
-
-	return in->ops.hdmi->audio_supported(in);
-}
-
-static int hdmic_audio_config(struct omap_dss_device *dssdev,
-		struct omap_dss_audio *audio)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* config audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_config(in, audio);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
-
-	return 0;
-}
-
 static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
@@ -296,13 +204,6 @@ static struct omap_dss_driver hdmic_driver = {
 	.detect			= hdmic_detect,
 	.set_hdmi_mode		= hdmic_set_hdmi_mode,
 	.set_hdmi_infoframe	= hdmic_set_infoframe,
-
-	.audio_enable		= hdmic_audio_enable,
-	.audio_disable		= hdmic_audio_disable,
-	.audio_start		= hdmic_audio_start,
-	.audio_stop		= hdmic_audio_stop,
-	.audio_supported	= hdmic_audio_supported,
-	.audio_config		= hdmic_audio_config,
 };
 
 static int hdmic_probe_pdata(struct platform_device *pdev)

drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c

@@ -249,6 +249,7 @@ static int tfp410_probe(struct platform_device *pdev)
 	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
 	dssdev->owner = THIS_MODULE;
 	dssdev->phy.dpi.data_lines = ddata->data_lines;
+	dssdev->port_num = 1;
 
 	r = omapdss_register_output(dssdev);
 	if (r) {

drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c

@@ -193,55 +193,6 @@ static bool tpd_detect(struct omap_dss_device *dssdev)
 	return gpio_get_value_cansleep(ddata->hpd_gpio);
 }
 
-static int tpd_audio_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_enable(in);
-}
-
-static void tpd_audio_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_disable(in);
-}
-
-static int tpd_audio_start(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_start(in);
-}
-
-static void tpd_audio_stop(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_stop(in);
-}
-
-static bool tpd_audio_supported(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_supported(in);
-}
-
-static int tpd_audio_config(struct omap_dss_device *dssdev,
-		struct omap_dss_audio *audio)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_config(in, audio);
-}
-
 static int tpd_set_infoframe(struct omap_dss_device *dssdev,
 		const struct hdmi_avi_infoframe *avi)
 {
@@ -275,13 +226,6 @@ static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
 	.detect			= tpd_detect,
 	.set_infoframe		= tpd_set_infoframe,
 	.set_hdmi_mode		= tpd_set_hdmi_mode,
-
-	.audio_enable		= tpd_audio_enable,
-	.audio_disable		= tpd_audio_disable,
-	.audio_start		= tpd_audio_start,
-	.audio_stop		= tpd_audio_stop,
-	.audio_supported	= tpd_audio_supported,
-	.audio_config		= tpd_audio_config,
 };
 
 static int tpd_probe_pdata(struct platform_device *pdev)
@@ -409,6 +353,7 @@ static int tpd_probe(struct platform_device *pdev)
 	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
 	dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
 	dssdev->owner = THIS_MODULE;
+	dssdev->port_num = 1;
 
 	in = ddata->in;
 

drivers/video/fbdev/omap2/dss/Kconfig

@@ -74,9 +74,6 @@ config OMAP4_DSS_HDMI
 	help
 	  HDMI support for OMAP4 based SoCs.
 
-config OMAP4_DSS_HDMI_AUDIO
-	bool
-
 config OMAP5_DSS_HDMI
 	bool "HDMI support for OMAP5"
 	default n
@@ -86,10 +83,6 @@ config OMAP5_DSS_HDMI
 	  Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
 	  specification.
 
-config OMAP5_DSS_HDMI_AUDIO
-	depends on OMAP5_DSS_HDMI
-	bool
-
 config OMAP2_DSS_SDI
 	bool "SDI support"
         default n

drivers/video/fbdev/omap2/dss/Makefile

@@ -2,7 +2,7 @@ obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	output.o dss-of.o
+	output.o dss-of.o pll.o
 # DSS compat layer files
 omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
 	dispc-compat.o display-sysfs.o