---

yaml
---
r: 86433
b: refs/heads/master
c: 547598d
h: refs/heads/master
i:
  86431: ab75be4
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: be71716e464f4ea38f08034dc666f2feb55535d9
+refs/heads/master: 547598d3a91f11b1f802bf0b122f777c3c22f26d

trunk/Documentation/debugging-via-ohci1394.txt

@@ -36,14 +36,15 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
-the OHCI-1394 controllers to a working state and can be used to enable
-physical DMA. By default you only have to load the driver, and physical
-DMA access will be granted to all remote nodes, but it can be turned off
-when using the ohci1394 driver.
-
-Because these drivers depend on the PCI enumeration to be completed, an
-initialization routine which can runs pretty early (long before console_init(),
+The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
+to a working state and enables physical DMA by default for all remote nodes.
+This can be turned off by ohci1394's module parameter phys_dma=0.
+
+The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+DMA, hence is not yet suitable for remote debugging.
+
+Because ohci1394 depends on the PCI enumeration to be completed, an
+initialization routine which runs pretty early (long before console_init()
 which makes the printk buffer appear on the console can be called) was written.
 
 To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:

trunk/Documentation/feature-removal-schedule.txt

@@ -172,6 +172,16 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
+What:	ide-tape driver
+When:	July 2008
+Files:	drivers/ide/ide-tape.c
+Why:	This driver might not have any users anymore and maintaining it for no
+	reason is an effort no one wants to make.
+Who:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+	<petkovbb@googlemail.com>
+
+---------------------------
+
 What: libata spindown skipping and warning
 When: Dec 2008
 Why:  Some halt(8) implementations synchronize caches for and spin

trunk/Documentation/ide.txt

@@ -258,8 +258,6 @@ Summary of ide driver parameters for kernel command line
 			  As for VLB, it is safest to not specify it.
 			  Bigger values are safer than smaller ones.
 
- "idex=noprobe"		: do not attempt to access/use this interface
-
  "idex=base"		: probe for an interface at the addr specified,
 			  where "base" is usually 0x1f0 or 0x170
 			  and "ctl" is assumed to be "base"+0x206
@@ -307,53 +305,6 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
 kernel paremeter to enable probing for VLB version of the chipset (PCI ones
 are detected automatically).
 
-================================================================================
-
-IDE ATAPI streaming tape driver
--------------------------------
-
-This driver is a part of the Linux ide driver and works in co-operation
-with linux/drivers/block/ide.c.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-Pipelined operation mode is now supported on both reads and writes.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices:
-
- ht0		major 37, minor 0	first  IDE tape, rewind on close.
- ht1		major 37, minor 1	second IDE tape, rewind on close.
- ...
- nht0		major 37, minor 128	first  IDE tape, no rewind on close.
- nht1		major 37, minor 129	second IDE tape, no rewind on close.
- ...
-
-Run /dev/MAKEDEV to create the above entries.
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
-	1.	ide-tape is operating in the pipelined operation mode.
-	2.	No buffering is performed by the user backup program.
-
-
-
 ================================================================================
 
 Some Terminology

trunk/MAINTAINERS

@@ -2744,6 +2744,8 @@ S:	Maintained
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
 M:	flatif@neteffect.com
+P:	Nishi Gupta
+M:	ngupta@neteffect.com
 P:	Glenn Streiff
 M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org

trunk/arch/um/kernel/process.c

@@ -128,8 +128,6 @@ void *get_current(void)
 	return current;
 }
 
-extern void schedule_tail(struct task_struct *prev);
-
 /*
  * This is called magically, by its address being stuffed in a jmp_buf
  * and being longjmp-d to.

trunk/arch/x86/Kconfig.cpu

@@ -377,6 +377,19 @@ config X86_OOSTORE
 	def_bool y
 	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
 
+#
+# P6_NOPs are a relatively minor optimization that require a family >=
+# 6 processor, except that it is broken on certain VIA chips.
+# Furthermore, AMD chips prefer a totally different sequence of NOPs
+# (which work on all CPUs).  As a result, disallow these if we're
+# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
+# x86-64 capable chips); the list of processors in the right-hand clause
+# are the cores that benefit from this optimization.
+#
+config X86_P6_NOP
+	def_bool y
+	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || PENTIUM4)
+
 config X86_TSC
 	def_bool y
 	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
@@ -390,6 +403,7 @@ config X86_CMOV
 config X86_MINIMUM_CPU_FAMILY
 	int
 	default "64" if X86_64
+	default "6" if X86_32 && X86_P6_NOP
 	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 

trunk/arch/x86/boot/memory.c

@@ -37,6 +37,12 @@ static int detect_memory_e820(void)
 		      "=m" (*desc)
 		    : "D" (desc), "d" (SMAP), "a" (0xe820));
 
+		/* BIOSes which terminate the chain with CF = 1 as opposed
+		   to %ebx = 0 don't always report the SMAP signature on
+		   the final, failing, probe. */
+		if (err)
+			break;
+
 		/* Some BIOSes stop returning SMAP in the middle of
 		   the search loop.  We don't know exactly how the BIOS
 		   screwed up the map at that point, we might have a
@@ -47,9 +53,6 @@ static int detect_memory_e820(void)
 			break;
 		}
 
-		if (err)
-			break;
-
 		count++;
 		desc++;
 	} while (next && count < E820MAX);

trunk/arch/x86/kernel/asm-offsets_32.c

@@ -128,13 +128,11 @@ void foo(void)
 	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
 #endif
 
-#ifdef CONFIG_LGUEST_GUEST
+#if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
 	OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
-#endif
 
-#ifdef CONFIG_LGUEST
 	BLANK();
 	OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
 	OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);

trunk/arch/x86/kernel/cpu/common.c

@@ -504,7 +504,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 
 	/* Clear all flags overriden by options */
 	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] ^= cleared_cpu_caps[i];
+		c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
 	/* Init Machine Check Exception if available. */
 	mcheck_init(c);

trunk/arch/x86/kernel/cpu/mtrr/main.c

@@ -43,6 +43,7 @@
 #include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
+#include <asm/kvm_para.h>
 #include "mtrr.h"
 
 u32 num_var_ranges = 0;
@@ -649,6 +650,7 @@ static __init int amd_special_default_mtrr(void)
 
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
+ * @end_pfn: ending page frame number
  *
  * Some buggy BIOSes don't setup the MTRRs properly for systems with certain
  * memory configurations.  This routine checks that the highest MTRR matches
@@ -688,8 +690,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		printk(KERN_WARNING "WARNING: strange, CPU MTRRs all blank?\n");
-		WARN_ON(1);
+		if (!kvm_para_available()) {
+			printk(KERN_WARNING
+				"WARNING: strange, CPU MTRRs all blank?\n");
+			WARN_ON(1);
+		}
 		return 0;
 	}
 

trunk/arch/x86/kernel/cpu/transmeta.c

@@ -76,13 +76,6 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	/* All Transmeta CPUs have a constant TSC */
 	set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
 
-	/* If we can run i686 user-space code, call us an i686 */
-#define USER686 ((1 << X86_FEATURE_TSC)|\
-		 (1 << X86_FEATURE_CX8)|\
-		 (1 << X86_FEATURE_CMOV))
-        if (c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686)
-		c->x86 = 6;
-
 #ifdef CONFIG_SYSCTL
 	/* randomize_va_space slows us down enormously;
 	   it probably triggers retranslation of x86->native bytecode */

trunk/arch/x86/kernel/entry_64.S

@@ -453,6 +453,7 @@ ENTRY(stub_execve)
 	CFI_REGISTER rip, r11
 	SAVE_REST
 	FIXUP_TOP_OF_STACK %r11
+	movq %rsp, %rcx
 	call sys_execve
 	RESTORE_TOP_OF_STACK %r11
 	movq %rax,RAX(%rsp)
@@ -1036,15 +1037,16 @@ ENDPROC(child_rip)
  *	rdi: name, rsi: argv, rdx: envp
  *
  * We want to fallback into:
- *	extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
+ *	extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs)
  *
  * do_sys_execve asm fallback arguments:
- *	rdi: name, rsi: argv, rdx: envp, fake frame on the stack
+ *	rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
  */
 ENTRY(kernel_execve)
 	CFI_STARTPROC
 	FAKE_STACK_FRAME $0
 	SAVE_ALL	
+	movq %rsp,%rcx
 	call sys_execve
 	movq %rax, RAX(%rsp)	
 	RESTORE_REST

trunk/arch/x86/kernel/head_32.S

@@ -606,7 +606,7 @@ ENTRY(_stext)
 .section ".bss.page_aligned","wa"
 	.align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
-ENTRY(swapper_pg_pmd)
+swapper_pg_pmd:
 	.fill 1024*KPMDS,4,0
 #else
 ENTRY(swapper_pg_dir)

trunk/arch/x86/kernel/head_64.S

@@ -379,18 +379,24 @@ NEXT_PAGE(level2_ident_pgt)
 	/* Since I easily can, map the first 1G.
 	 * Don't set NX because code runs from these pages.
 	 */
-	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
+	PMDS(0, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
 
 NEXT_PAGE(level2_kernel_pgt)
-	/* 40MB kernel mapping. The kernel code cannot be bigger than that.
-	   When you change this change KERNEL_TEXT_SIZE in page.h too. */
-	/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
-	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
-	/* Module mapping starts here */
-	.fill	(PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
+	/*
+	 * 128 MB kernel mapping. We spend a full page on this pagetable
+	 * anyway.
+	 *
+	 * The kernel code+data+bss must not be bigger than that.
+	 *
+	 * (NOTE: at +128MB starts the module area, see MODULES_VADDR.
+	 *  If you want to increase this then increase MODULES_VADDR
+	 *  too.)
+	 */
+	PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+		KERNEL_IMAGE_SIZE/PMD_SIZE)
 
 NEXT_PAGE(level2_spare_pgt)
-	.fill   512,8,0
+	.fill   512, 8, 0
 
 #undef PMDS
 #undef NEXT_PAGE

trunk/arch/x86/kernel/hpet.c

@@ -368,8 +368,8 @@ static int hpet_clocksource_register(void)
 	return 0;
 }
 
-/*
- * Try to setup the HPET timer
+/**
+ * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
  */
 int __init hpet_enable(void)
 {

trunk/arch/x86/kernel/process_64.c

@@ -730,16 +730,16 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
  */
 asmlinkage
 long sys_execve(char __user *name, char __user * __user *argv,
-		char __user * __user *envp, struct pt_regs regs)
+		char __user * __user *envp, struct pt_regs *regs)
 {
 	long error;
 	char * filename;
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
-	if (IS_ERR(filename)) 
+	if (IS_ERR(filename))
 		return error;
-	error = do_execve(filename, argv, envp, &regs); 
+	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
 	return error;
 }

trunk/arch/x86/kernel/setup_64.c

@@ -1021,7 +1021,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 
 	/* Clear all flags overriden by options */
 	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] ^= cleared_cpu_caps[i];
+		c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
 #ifdef CONFIG_X86_MCE
 	mcheck_init(c);

trunk/arch/x86/kernel/smpboot_64.c

@@ -554,10 +554,10 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid)
 	int timeout;
 	unsigned long start_rip;
 	struct create_idle c_idle = {
-		.work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
 		.cpu = cpu,
 		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
+	INIT_WORK(&c_idle.work, do_fork_idle);
 
 	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
 	if (!cpu_gdt_descr[cpu].address &&

trunk/arch/x86/kernel/stacktrace.c

@@ -25,6 +25,8 @@ static int save_stack_stack(void *data, char *name)
 static void save_stack_address(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = data;
+	if (!reliable)
+		return;
 	if (trace->skip > 0) {
 		trace->skip--;
 		return;
@@ -37,6 +39,8 @@ static void
 save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = (struct stack_trace *)data;
+	if (!reliable)
+		return;
 	if (in_sched_functions(addr))
 		return;
 	if (trace->skip > 0) {

trunk/arch/x86/kernel/tsc_32.c

@@ -28,7 +28,8 @@ EXPORT_SYMBOL_GPL(tsc_khz);
 static int __init tsc_setup(char *str)
 {
 	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-				"cannot disable TSC.\n");
+				"cannot disable TSC completely.\n");
+	mark_tsc_unstable("user disabled TSC");
 	return 1;
 }
 #else