---

yaml
---
r: 288518
b: refs/heads/master
c: 96ee049
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 89c5bd08df5841326abbf167d136bcf14cf759ed
+refs/heads/master: 96ee0499c59810736dc2e56784d061dc6a1d98e8

trunk/Documentation/hwmon/w83627ehf

@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
@@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
 pwm[1-4]_stop_time  - how many milliseconds [ms] must elapse to switch
                       corresponding fan off. (when the temperature was below
                       defined range).
+pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
+pwm[1-4]_step_output- rate of fan speed change (1 - 255)
+pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
+pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
+                      is above defined range.
 
-Note: last two functions are influenced by other control bits, not yet exported
+Note: last six functions are influenced by other control bits, not yet exported
       by the driver, so a change might not have any effect.
 
 Implementation Details

trunk/Documentation/hwmon/zl6100

@@ -88,14 +88,12 @@ Module parameters
 delay
 -----
 
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
 
 
 Sysfs entries

trunk/MAINTAINERS

@@ -1513,19 +1513,23 @@ F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
 M:	Marcel Holtmann <marcel@holtmann.org>
-M:	"Gustavo F. Padovan" <padovan@profusion.mobi>
+M:	Gustavo Padovan <gustavo@padovan.org>
+M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
 S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
 M:	Marcel Holtmann <marcel@holtmann.org>
-M:	"Gustavo F. Padovan" <padovan@profusion.mobi>
+M:	Gustavo Padovan <gustavo@padovan.org>
+M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
 S:	Maintained
 F:	net/bluetooth/
 F:	include/net/bluetooth/
@@ -1717,6 +1721,14 @@ F:	include/linux/can/error.h
 F:	include/linux/can/netlink.h
 F:	include/linux/can/platform/
 
+CAPABILITIES
+M:	Serge Hallyn <serge.hallyn@canonical.com>
+L:	linux-security-module@vger.kernel.org
+S:	Supported	
+F:	include/linux/capability.h
+F:	security/capability.c
+F:	security/commoncap.c 
+
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -2351,6 +2363,15 @@ S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
 
+EXYNOS MIPI DISPLAY DRIVERS
+M:	Inki Dae <inki.dae@samsung.com>
+M:	Donghwa Lee <dh09.lee@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+L:	linux-fbdev@vger.kernel.org
+S:	Maintained
+F:	drivers/video/exynos/exynos_mipi*
+F:	include/video/exynos_mipi*
+
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -5859,6 +5880,7 @@ F:	drivers/mmc/host/sdhci-s3c.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
 M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
@@ -6201,24 +6223,32 @@ F:	drivers/tty/serial/sunzilog.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/plat-spear/
 
 SPEAR3XX MACHINE SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/mach-spear3xx/
 
 SPEAR6XX MACHINE SUPPORT
 M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/mach-spear6xx/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/mach-spear*/clock.c
@@ -6227,6 +6257,8 @@ F:	arch/arm/plat-spear/include/plat/clock.h
 
 SPEAR PAD MULTIPLEXING SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/plat-spear/include/plat/padmux.h

trunk/arch/c6x/kernel/entry.S

@@ -717,33 +717,6 @@ ENTRY(sys_ftruncate64_c6x)
 #endif
 ENDPROC(sys_ftruncate64_c6x)
 
-#ifdef __ARCH_WANT_SYSCALL_OFF_T
-;; On Entry
-;;   A4 - fd
-;;   B4 - offset_lo (LE), offset_hi (BE)
-;;   A6 - offset_lo (BE), offset_hi (LE)
-;;   B6 - len
-;;   A8 - advice
-ENTRY(sys_fadvise64_c6x)
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	sys_fadvise64,A0
-	MVKH	.S1	sys_fadvise64,A0
-	BNOP	.S2X	A0,2
-#else
-	B	.S2	sys_fadvise64
-	NOP	2
-#endif
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	MV	.L2	B4,B5
- ||	MV	.D2X	A6,B4
-#else
-	MV	.D2X	A6,B5
-#endif
-	MV	.D1X	B6,A6
-	MV	.D2X	A8,B6
-#endif
-ENDPROC(sys_fadvise64_c6x)
-
 ;; On Entry
 ;;   A4 - fd
 ;;   B4 - offset_lo (LE), offset_hi (BE)