Merge branch 'work-fixes'

drivers/media/dvb/bt8xx/bt878.c

@@ -381,25 +381,65 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 
 EXPORT_SYMBOL(bt878_device_control);
 
+
+struct cards card_list[] __devinitdata = {
+
+	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
+	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
+	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,			"Pinnacle PCTV Sat" },
+	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,			"Pinnacle PCTV SAT CI" },
+	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,			"Twinhan VisionPlus DVB" },
+	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,			"ChainTech digitop DST-1000 DVB-S" },
+	{ 0x07711461, BTTV_BOARD_AVDVBT_771,			"AVermedia AverTV DVB-T 771" },
+	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,		"DViCO FusionHDTV DVB-T Lite" },
+	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,	"DViCO FusionHDTV 5 Lite" },
+	{ 0x20007063, BTTV_BOARD_PC_HDTV,			"pcHDTV HD-2000 TV"},
+	{ 0, -1, NULL }
+};
+
+
 /***********************/
 /* PCI device handling */
 /***********************/
 
 static int __devinit bt878_probe(struct pci_dev *dev,
 				 const struct pci_device_id *pci_id)
 {
-	int result;
+	int result = 0, has_dvb = 0, i;
 	unsigned char lat;
 	struct bt878 *bt;
 #if defined(__powerpc__)
 	unsigned int cmd;
 #endif
+	unsigned int cardid;
+	unsigned short id;
+	struct cards *dvb_cards;
 
 	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
 	       bt878_num);
 	if (pci_enable_device(dev))
 		return -EIO;
 
+	pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+	cardid = id << 16;
+	pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+	cardid |= id;
+
+	for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+		if (cardid == dvb_cards->pci_id) {
+			printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+				__func__, cardid, dvb_cards->name);
+			has_dvb = 1;
+		}
+	}
+
+	if (!has_dvb) {
+		printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+		result = -EINVAL;
+
+		goto fail0;
+	}
+
 	bt = &bt878[bt878_num];
 	bt->dev = dev;
 	bt->nr = bt878_num;
@@ -416,6 +456,8 @@ static int __devinit bt878_probe(struct pci_dev *dev,
 
 	pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
 	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
 	       bt878_num, bt->id, bt->revision, dev->bus->number,
 	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));

drivers/media/dvb/bt8xx/bt878.h

@@ -88,6 +88,23 @@
 
 #define BT878_RISC_SYNC_MASK	(1 << 15)
 
+
+#define BTTV_BOARD_UNKNOWN                 0x00
+#define BTTV_BOARD_PINNACLESAT             0x5e
+#define BTTV_BOARD_NEBULA_DIGITV           0x68
+#define BTTV_BOARD_PC_HDTV                 0x70
+#define BTTV_BOARD_TWINHAN_DST             0x71
+#define BTTV_BOARD_AVDVBT_771              0x7b
+#define BTTV_BOARD_AVDVBT_761              0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+	__u32 pci_id;
+	__u16 card_id;
+	char  *name;
+};
+
 extern int bt878_num;
 
 struct bt878 {

drivers/media/dvb/dvb-usb/Kconfig

@@ -83,12 +83,18 @@ config DVB_USB_UMT_010
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
 config DVB_USB_CXUSB
-	tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+	tristate "Conexant USB2.0 hybrid reference design support"
 	depends on DVB_USB
 	select DVB_CX22702
+	select DVB_LGDT330X
+	select DVB_MT352
 	help
-	  Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
-	  only the DVB-T part is supported.
+	  Say Y here to support the Conexant USB2.0 hybrid reference design.
+	  Currently, only DVB and ATSC modes are supported, analog mode
+	  shall be added in the future. Devices that require this module:
+
+	  Medion MD95700 hybrid USB2.0 device.
+	  DViCO FusionHDTV (Bluebird) USB2.0 devices
 
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"

drivers/media/dvb/dvb-usb/cxusb.c

@@ -234,7 +234,7 @@ static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
 
 static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x38 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
@@ -255,7 +255,7 @@ static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 
 static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 {	/* used in both lgz201 and th7579 */
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x39 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 };

drivers/media/dvb/dvb-usb/digitv.c

@@ -175,11 +175,13 @@ static int digitv_probe(struct usb_interface *intf,
 	if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
 		u8 b[4] = { 0 };
 
-		b[0] = 1;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+		if (d != NULL) { /* do that only when the firmware is loaded */
+			b[0] = 1;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
 
-		b[0] = 0;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+			b[0] = 0;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+		}
 	}
 	return ret;
 }
@@ -194,7 +196,7 @@ static struct dvb_usb_properties digitv_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-digitv-01.fw",
+	.firmware = "dvb-usb-digitv-02.fw",
 
 	.size_of_priv     = 0,
 
@@ -229,6 +231,7 @@ static struct dvb_usb_properties digitv_properties = {
 			{ &digitv_table[0], NULL },
 			{ NULL },
 		},
+		{ NULL },
 	}
 };
 

drivers/media/dvb/dvb-usb/vp7045-fe.c

@@ -23,10 +23,11 @@
 
 struct vp7045_fe_state {
 	struct dvb_frontend fe;
+	struct dvb_frontend_ops ops;
+
 	struct dvb_usb_device *d;
 };
 
-
 static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
 {
 	struct vp7045_fe_state *state = fe->demodulator_priv;
@@ -150,7 +151,8 @@ struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
 		goto error;
 
 	s->d = d;
-	s->fe.ops = &vp7045_fe_ops;
+	memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.ops = &s->ops;
 	s->fe.demodulator_priv = s;
 
 	goto success;

drivers/media/dvb/frontends/Kconfig

@@ -28,12 +28,6 @@ config DVB_TDA8083
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
-config DVB_TDA80XX
-	tristate "Philips TDA8044 or TDA8083 based"
-	depends on DVB_CORE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
 config DVB_MT312
 	tristate "Zarlink MT312 based"
 	depends on DVB_CORE
@@ -139,12 +133,6 @@ config DVB_DIB3000MC
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
-config DVB_ATMEL_AT76C651
-	tristate "Atmel AT76C651 based"
-	depends on DVB_CORE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
 	depends on DVB_CORE

drivers/media/dvb/frontends/Makefile

@@ -8,7 +8,6 @@ obj-$(CONFIG_DVB_CORE) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
 obj-$(CONFIG_DVB_CX24110) += cx24110.o
 obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
@@ -22,7 +21,6 @@ obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o