Merge branch 'tegra/dma-reset-rework' into next/soc

Bringing in the tegra dma/reset rework as a base for new SoC branches.

* tegra/dma-reset-rework: (81 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -9,6 +9,7 @@ Required properties:
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   "pclk" (The Tegra clock of that name),
   "clk32k_in" (The 32KHz clock input to Tegra).

Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt

@@ -0,0 +1,63 @@
+NVIDIA Tegra124 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <112400000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra20-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra30-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/dma/tegra20-apbdma.txt

@@ -5,6 +5,16 @@ Required properties:
 - reg: Should contain DMA registers location and length. This shuld include
   all of the per-channel registers.
 - interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+  client nodes' dmas properties. The specifier represents the DMA request
+  select value for the peripheral. For more details, consult the Tegra TRM's
+  documentation of the APB DMA channel control register REQ_SEL field.
 
 Examples:
 
@@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
 		       0 149 0x04
 		       0 150 0x04
 		       0 151 0x04 >;
+	clocks = <&tegra_car 34>;
+	resets = <&tegra_car 34>;
+	reset-names = "dma";
+	#dma-cells = <1>;
 };