---

yaml
---
r: 269329
b: refs/heads/master
c: 7a113d3
h: refs/heads/master
i:
  269327: 782bfaa
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9b8ad4ac790041b40146a3cb7aefe1a5a5db953d
+refs/heads/master: 7a113d38406cb1056f77bf9a802f2df46409ab05

trunk/drivers/ata/pata_sil680.c

@@ -82,7 +82,8 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev,
  *	space for us.
  */
 
-static int sil680_cable_detect(struct ata_port *ap) {
+static int sil680_cable_detect(struct ata_port *ap)
+{
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	unsigned long addr = sil680_selreg(ap, 0);
 	u8 ata66;
@@ -181,7 +182,7 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	mode &= ~(0x03 << port_shift);
 
 	/* Extract scsc */
-	scsc = (scsc & 0x30) ? 1: 0;
+	scsc = (scsc & 0x30) ? 1 : 0;
 
 	if (adev->dma_mode >= XFER_UDMA_0) {
 		multi = 0x10C1;
@@ -254,7 +255,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 {
 	u8 tmpbyte	= 0;
 
-        /* FIXME: double check */
+	/* FIXME: double check */
 	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
 			      pdev->revision ? 1 : 255);
 
@@ -272,22 +273,22 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 		*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
 #endif
 
-	switch(tmpbyte & 0x30) {
-		case 0x00:
-			/* 133 clock attempt to force it on */
-			pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
-			break;
-		case 0x30:
-			/* if clocking is disabled */
-			/* 133 clock attempt to force it on */
-			pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
-			break;
-		case 0x10:
-			/* 133 already */
-			break;
-		case 0x20:
-			/* BIOS set PCI x2 clocking */
-			break;
+	switch (tmpbyte & 0x30) {
+	case 0x00:
+		/* 133 clock attempt to force it on */
+		pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+		break;
+	case 0x30:
+		/* if clocking is disabled */
+		/* 133 clock attempt to force it on */
+		pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+		break;
+	case 0x10:
+		/* 133 already */
+		break;
+	case 0x20:
+		/* BIOS set PCI x2 clocking */
+		break;
 	}
 
 	pci_read_config_byte(pdev,   0x8A, &tmpbyte);
@@ -305,12 +306,19 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 	pci_write_config_dword(pdev, 0xB8, 0x43924392);
 	pci_write_config_dword(pdev, 0xBC, 0x40094009);
 
-	switch(tmpbyte & 0x30) {
-		case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
-		case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
-		case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
-		/* This last case is _NOT_ ok */
-		case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+	switch (tmpbyte & 0x30) {
+	case 0x00:
+		printk(KERN_INFO "sil680: 100MHz clock.\n");
+		break;
+	case 0x10:
+		printk(KERN_INFO "sil680: 133MHz clock.\n");
+		break;
+	case 0x20:
+		printk(KERN_INFO "sil680: Using PCI clock.\n");
+		break;
+	/* This last case is _NOT_ ok */
+	case 0x30:
+		printk(KERN_ERR "sil680: Clock disabled ?\n");
 	}
 	return tmpbyte & 0x30;
 }