ARM: S3C24XX: Remove unused GPIO definitions for port J

There is no need now for individual GPIO port J pin control bit
definitions, the GPIO0..12 pins can be configured using the gpiolib
API. The GPJ* register address offset definitions for S3C2413 are
moved to the common mach-s3c24xx/include/mach/regs-gpio.h header.
These are still used outside of the gpio-samsung driver by PM code.

Switching GPJ port to camera function can be done for example with:
s3c_gpio_cfgall_range(S3C2410_GPJ(0), 13, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -302,7 +302,7 @@
 /* S3C2410:
  * Port G consists of 8 GPIO/IRQ/Special function
  *
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPGCON has 2 bits for each of the input pins on port G
  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
  *
  * pull up works like all other ports.
@@ -366,7 +366,7 @@
 
 /* Port H consists of11 GPIO/serial/Misc pins
  *
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPHCON has 2 bits for each of the input pins on port H
  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
  *
  * pull up works like all other ports.
@@ -427,6 +427,19 @@
  * for the 2412/2413 from the 2410/2440/2442
 */
 
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ *   00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON	   S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT	   S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP	   S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON  S3C2410_GPIOREG(0x8C)
+
 /* S3C2443 and above */
 #define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
 #define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -71,7 +71,6 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
 #include <mach/fb.h>
 
 #include <plat/usb-control.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -42,7 +42,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
 #include <mach/regs-lcd.h>
 #include <mach/h1940.h>
 #include <mach/fb.h>

arch/arm/mach-s3c24xx/pm-s3c2412.c

@@ -26,7 +26,6 @@
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
-#include <mach/regs-gpioj.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-dsc.h>
 

arch/arm/mach-s3c24xx/s3c2412.c

@@ -39,7 +39,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
 #include <mach/regs-dsc.h>
 #include <plat/regs-spi.h>
 #include <mach/regs-s3c2412.h>

arch/arm/mach-s3c24xx/s3c244x.c

@@ -36,7 +36,6 @@
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
 #include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>