PCI: Remove quirk_via_abnormal_poweroff

My K8T800 mobo resumes fine from suspend to ram with and without patch
applied against 2.6.18.

quirk_via_abnormal_poweroff makes some boards not boot 2.6.18, so IMO patch
should go to head, 2.6.18.2 and everywhere "ACPI: ACPICA 20060623" has been
applied.


Remove quirk_via_abnormal_poweroff

Obsoleted by "ACPI: ACPICA 20060623":
<snip>
    Implemented support for "ignored" bits in the ACPI
    registers.  According to the ACPI specification, these
    bits should be preserved when writing the registers via
    a read/modify/write cycle. There are 3 bits preserved
    in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
    and PM1_STATUS[11].
    http://bugzilla.kernel.org/show_bug.cgi?id=3691
</snip>

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: "Brown, Len" <len.brown@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/pci/quirks.c

@@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C597_0,	quirk_vt82c598_id );
 
-#ifdef CONFIG_ACPI_SLEEP
-
-/*
- * Some VIA systems boot with the abnormal status flag set. This can cause
- * the BIOS to re-POST the system on resume rather than passing control
- * back to the OS.  Clear the flag on boot
- */
-static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
-{
-	u32 reg;
-
-	acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
-				&reg);
-
-	if (reg & 0x800) {
-		printk("Clearing abnormal poweroff flag\n");
-		acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
-					ACPI_REGISTER_PM1_STATUS,
-					(u16)0x800);
-	}
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
-
-#endif
-
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to