chelsio: spaces, tabs and friends

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

drivers/net/chelsio/common.h

@@ -324,7 +324,7 @@ struct board_info {
 	unsigned char           mdio_phybaseaddr;
 	struct gmac            *gmac;
 	struct gphy            *gphy;
-	struct mdio_ops	       *mdio_ops;
+	struct mdio_ops        *mdio_ops;
 	const char             *desc;
 };
 

drivers/net/chelsio/cpl5_cmd.h

@@ -103,7 +103,7 @@ enum CPL_opcode {
 	CPL_MIGRATE_C2T_RPL   = 0xDD,
 	CPL_ERROR             = 0xD7,
 
-    /* internal: driver -> TOM */
+	/* internal: driver -> TOM */
 	CPL_MSS_CHANGE        = 0xE1
 };
 
@@ -159,8 +159,8 @@ enum {                // TX_PKT_LSO ethernet types
 };
 
 union opcode_tid {
-    u32 opcode_tid;
-    u8 opcode;
+	u32 opcode_tid;
+	u8 opcode;
 };
 
 #define S_OPCODE 24
@@ -234,7 +234,7 @@ struct cpl_pass_accept_req {
 	u32 local_ip;
 	u32 peer_ip;
 	u32 tos_tid;
-    struct tcp_options tcp_options;
+	struct tcp_options tcp_options;
 	u8  dst_mac[6];
 	u16 vlan_tag;
 	u8  src_mac[6];
@@ -250,12 +250,12 @@ struct cpl_pass_accept_rpl {
 	u32 peer_ip;
 	u32 opt0h;
 	union {
-	u32 opt0l;
-	struct {
-	    u8 rsvd[3];
-	    u8 status;
+		u32 opt0l;
+		struct {
+		    u8 rsvd[3];
+		    u8 status;
+		};
 	};
-    };
 };
 
 struct cpl_act_open_req {

drivers/net/chelsio/cxgb2.c

@@ -69,14 +69,14 @@ static inline void cancel_mac_stats_update(struct adapter *ap)
 	cancel_delayed_work(&ap->stats_update_task);
 }
 
-#define MAX_CMDQ_ENTRIES 16384
-#define MAX_CMDQ1_ENTRIES 1024
-#define MAX_RX_BUFFERS 16384
-#define MAX_RX_JUMBO_BUFFERS 16384
+#define MAX_CMDQ_ENTRIES	16384
+#define MAX_CMDQ1_ENTRIES	1024
+#define MAX_RX_BUFFERS		16384
+#define MAX_RX_JUMBO_BUFFERS	16384
 #define MAX_TX_BUFFERS_HIGH	16384U
 #define MAX_TX_BUFFERS_LOW	1536U
 #define MAX_TX_BUFFERS		1460U
-#define MIN_FL_ENTRIES 32
+#define MIN_FL_ENTRIES		32
 
 #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
 			 NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
@@ -143,7 +143,7 @@ static void link_report(struct port_info *p)
 			case SPEED_100:   s = "100Mbps"; break;
 		}
 
-	printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
+		printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
 		       p->dev->name, s,
 		       p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
 	}
@@ -233,7 +233,7 @@ static int cxgb_up(struct adapter *adapter)
 
 	t1_sge_start(adapter->sge);
 	t1_interrupts_enable(adapter);
- out_err:
+out_err:
 	return err;
 }
 
@@ -749,7 +749,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
 		return -EINVAL;
 
 	if (adapter->flags & FULL_INIT_DONE)
-	return -EBUSY;
+		return -EBUSY;
 
 	adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
 	adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
@@ -764,7 +764,7 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 	struct adapter *adapter = dev->priv;
 
 	adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
- 	adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
+	adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
 	adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
 	t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
 	return 0;
@@ -782,9 +782,9 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 
 static int get_eeprom_len(struct net_device *dev)
 {
- 	struct adapter *adapter = dev->priv;
+	struct adapter *adapter = dev->priv;
 
- 	return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
+	return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
 }
 
 #define EEPROM_MAGIC(ap) \
@@ -848,7 +848,7 @@ static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 		u32 val;
 
 		if (!phy->mdio_read)
-	    return -EOPNOTSUPP;
+			return -EOPNOTSUPP;
 		phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
 			       &val);
 		data->val_out = val;
@@ -860,7 +860,7 @@ static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 		if (!capable(CAP_NET_ADMIN))
 		    return -EPERM;
 		if (!phy->mdio_write)
-	    return -EOPNOTSUPP;
+			return -EOPNOTSUPP;
 		phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
 			        data->val_in);
 		break;
@@ -879,9 +879,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu)
 	struct cmac *mac = adapter->port[dev->if_port].mac;
 
 	if (!mac->ops->set_mtu)
-	return -EOPNOTSUPP;
+		return -EOPNOTSUPP;
 	if (new_mtu < 68)
-	return -EINVAL;
+		return -EINVAL;
 	if ((ret = mac->ops->set_mtu(mac, new_mtu)))
 		return ret;
 	dev->mtu = new_mtu;
@@ -1211,9 +1211,9 @@ static int __devinit init_one(struct pci_dev *pdev,
 
 	return 0;
 
- out_release_adapter_res:
+out_release_adapter_res:
 	t1_free_sw_modules(adapter);
- out_free_dev:
+out_free_dev:
 	if (adapter) {
 		if (adapter->regs)
 			iounmap(adapter->regs);
@@ -1222,7 +1222,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 				free_netdev(adapter->port[i].dev);
 	}
 	pci_release_regions(pdev);
- out_disable_pdev:
+out_disable_pdev:
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 	return err;
@@ -1273,20 +1273,20 @@ static int t1_clock(struct adapter *adapter, int mode)
 	int M_MEM_VAL;
 
 	enum {
-		M_CORE_BITS = 9,
-		T_CORE_VAL = 0,
-		T_CORE_BITS = 2,
-		N_CORE_VAL = 0,
-		N_CORE_BITS = 2,
-		M_MEM_BITS = 9,
-		T_MEM_VAL = 0,
-		T_MEM_BITS = 2,
-		N_MEM_VAL = 0,
-		N_MEM_BITS = 2,
-		NP_LOAD = 1 << 17,
-		S_LOAD_MEM = 1 << 5,
-		S_LOAD_CORE = 1 << 6,
-		S_CLOCK = 1 << 3
+		M_CORE_BITS	= 9,
+		T_CORE_VAL	= 0,
+		T_CORE_BITS	= 2,
+		N_CORE_VAL	= 0,
+		N_CORE_BITS	= 2,
+		M_MEM_BITS	= 9,
+		T_MEM_VAL	= 0,
+		T_MEM_BITS	= 2,
+		N_MEM_VAL	= 0,
+		N_MEM_BITS	= 2,
+		NP_LOAD		= 1 << 17,
+		S_LOAD_MEM	= 1 << 5,
+		S_LOAD_CORE	= 1 << 6,
+		S_CLOCK		= 1 << 3
 	};
 
 	if (!t1_is_T1B(adapter))

drivers/net/chelsio/elmer0.h

@@ -46,14 +46,14 @@ enum {
 };
 
 /* ELMER0 registers */
-#define A_ELMER0_VERSION 0x100000
-#define A_ELMER0_PHY_CFG 0x100004
-#define A_ELMER0_INT_ENABLE 0x100008
-#define A_ELMER0_INT_CAUSE 0x10000c
-#define A_ELMER0_GPI_CFG 0x100010
-#define A_ELMER0_GPI_STAT 0x100014
-#define A_ELMER0_GPO 0x100018
-#define A_ELMER0_PORT0_MI1_CFG 0x400000
+#define A_ELMER0_VERSION	0x100000
+#define A_ELMER0_PHY_CFG	0x100004
+#define A_ELMER0_INT_ENABLE	0x100008
+#define A_ELMER0_INT_CAUSE	0x10000c
+#define A_ELMER0_GPI_CFG	0x100010
+#define A_ELMER0_GPI_STAT	0x100014
+#define A_ELMER0_GPO		0x100018
+#define A_ELMER0_PORT0_MI1_CFG	0x400000
 
 #define S_MI1_MDI_ENABLE    0
 #define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE)
@@ -111,18 +111,18 @@ enum {
 #define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY)
 #define F_MI1_OP_BUSY    V_MI1_OP_BUSY(1U)
 
-#define A_ELMER0_PORT1_MI1_CFG 0x500000
-#define A_ELMER0_PORT1_MI1_ADDR 0x500004
-#define A_ELMER0_PORT1_MI1_DATA 0x500008
-#define A_ELMER0_PORT1_MI1_OP 0x50000c
-#define A_ELMER0_PORT2_MI1_CFG 0x600000
-#define A_ELMER0_PORT2_MI1_ADDR 0x600004
-#define A_ELMER0_PORT2_MI1_DATA 0x600008
-#define A_ELMER0_PORT2_MI1_OP 0x60000c
-#define A_ELMER0_PORT3_MI1_CFG 0x700000
-#define A_ELMER0_PORT3_MI1_ADDR 0x700004
-#define A_ELMER0_PORT3_MI1_DATA 0x700008
-#define A_ELMER0_PORT3_MI1_OP 0x70000c
+#define A_ELMER0_PORT1_MI1_CFG	0x500000
+#define A_ELMER0_PORT1_MI1_ADDR	0x500004
+#define A_ELMER0_PORT1_MI1_DATA	0x500008
+#define A_ELMER0_PORT1_MI1_OP	0x50000c
+#define A_ELMER0_PORT2_MI1_CFG	0x600000
+#define A_ELMER0_PORT2_MI1_ADDR	0x600004
+#define A_ELMER0_PORT2_MI1_DATA	0x600008
+#define A_ELMER0_PORT2_MI1_OP	0x60000c
+#define A_ELMER0_PORT3_MI1_CFG	0x700000
+#define A_ELMER0_PORT3_MI1_ADDR	0x700004
+#define A_ELMER0_PORT3_MI1_DATA	0x700008
+#define A_ELMER0_PORT3_MI1_OP	0x70000c
 
 /* Simple bit definition for GPI and GP0 registers. */
 #define     ELMER0_GP_BIT0              0x0001

drivers/net/chelsio/espi.c

@@ -202,9 +202,9 @@ static void espi_setup_for_pm3393(adapter_t *adapter)
 
 static void espi_setup_for_vsc7321(adapter_t *adapter)
 {
-        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
-        writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
-        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+	writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
 	writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
 	writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
 	writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
@@ -247,10 +247,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		writel(V_OUT_OF_SYNC_COUNT(4) |
 		       V_DIP2_PARITY_ERR_THRES(3) |
 		       V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
-        	writel(nports == 4 ? 0x200040 : 0x1000080,
+		writel(nports == 4 ? 0x200040 : 0x1000080,
 		       adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
 	} else
-        	writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+		writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
 
 	if (mac_type == CHBT_MAC_PM3393)
 		espi_setup_for_pm3393(adapter);
@@ -341,32 +341,31 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
  * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
  * one shot, since there is no per port counter on the out side.
  */
-int
-t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
+int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
 {
-        struct peespi *espi = adapter->espi;
+	struct peespi *espi = adapter->espi;
 	u8 i, nport = (u8)adapter->params.nports;
 
-        if (!wait) {
-                if (!spin_trylock(&espi->lock))
-                        return -1;
-        } else
-                spin_lock(&espi->lock);
+	if (!wait) {
+		if (!spin_trylock(&espi->lock))
+			return -1;
+	} else
+		spin_lock(&espi->lock);
 
-	if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
+	if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
 		espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
 					F_MONITORED_DIRECTION;
-                writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
- 	}
+		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+	}
 	for (i = 0 ; i < nport; i++, valp++) {
 		if (i) {
 			writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
 			       adapter->regs + A_ESPI_MISC_CONTROL);
 		}
-                *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
-        }
+		*valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+	}
 
-        writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
-        spin_unlock(&espi->lock);
-        return 0;
+	writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+	spin_unlock(&espi->lock);
+	return 0;
 }

drivers/net/chelsio/fpga_defs.h

@@ -98,9 +98,9 @@
 #define A_MI0_DATA_INT 0xb10
 
 /* GMAC registers */
-#define A_GMAC_MACID_LO 0x28
-#define A_GMAC_MACID_HI 0x2c
-#define A_GMAC_CSR 0x30
+#define A_GMAC_MACID_LO	0x28
+#define A_GMAC_MACID_HI	0x2c
+#define A_GMAC_CSR	0x30
 
 #define S_INTERFACE    0
 #define M_INTERFACE    0x3

drivers/net/chelsio/gmac.h

@@ -42,8 +42,15 @@
 
 #include "common.h"
 
-enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL };
-enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 };
+enum {
+	MAC_STATS_UPDATE_FAST,
+	MAC_STATS_UPDATE_FULL
+};
+
+enum {
+	MAC_DIRECTION_RX = 1,
+	MAC_DIRECTION_TX = 2
+};
 
 struct cmac_statistics {
 	/* Transmit */

drivers/net/chelsio/ixf1010.c

@@ -358,8 +358,8 @@ static void enable_port(struct cmac *mac)
 	val |= (1 << index);
 	t1_tpi_write(adapter, REG_PORT_ENABLE, val);
 
-       	index <<= 2;
-        if (is_T2(adapter)) {
+	index <<= 2;
+	if (is_T2(adapter)) {
 		/* T204: set the Fifo water level & threshold */
 		t1_tpi_write(adapter, RX_FIFO_HIGH_WATERMARK_BASE + index, 0x740);
 		t1_tpi_write(adapter, RX_FIFO_LOW_WATERMARK_BASE + index, 0x730);