---

yaml
---
r: 187704
b: refs/heads/master
c: 882d01f
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d608c738bb8fb37e5fbfcdef9c566764f2fea086
+refs/heads/master: 882d01f96bc1909455696aae6eb7ce4df3e908c8

trunk/Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

trunk/Documentation/cpu-freq/governors.txt

@@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
 decide that the CPU frequency needs to be increased.  
 
 ignore_nice_load: this parameter takes a value of '0' or '1'. When

trunk/Documentation/fault-injection/fault-injection.txt

@@ -143,8 +143,8 @@ o provide a way to configure fault attributes
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_entries(entries, attr, name);
-	void cleanup_fault_attr_entries(entries);
+	init_fault_attr_dentries(entries, attr, name);
+	void cleanup_fault_attr_dentries(entries);
 
 - module parameters
 

trunk/Documentation/feature-removal-schedule.txt

@@ -493,3 +493,52 @@ Why:	These two features use non-standard interfaces. There are the
 Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
+
+What:	usbvideo quickcam_messenger driver
+When:	2.6.35
+Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv06xx
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ov511 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/ov511.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	w9968cf v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/w9968cf*.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ovcamchip sensor framework
+When:	2.6.35
+Files:	drivers/media/video/ovcamchip/*
+Why:	Only used by obsoleted v4l1 drivers
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	stv680 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/stv680.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv0680
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	zc0301 v4l driver
+When:	2.6.35
+Files:	drivers/media/video/zc0301/*
+Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+	supports 2 USB-ID's (because it only supports a limited set of
+	sensors) wich are also supported by the gspca_zc3xx driver
+	(which supports 53 USB-ID's in total)
+Who:	Hans de Goede <hdegoede@redhat.com>

trunk/Documentation/input/multi-touch-protocol.txt

@@ -27,12 +27,30 @@ set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked.  If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass.  You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
 finger or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@@ -42,11 +60,9 @@ report finger tracking from hardware [5].
 Here is what a minimal event sequence for a two-finger touch would look
 like:
 
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
@@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
 different characteristic widths [1].
 
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can
 make use of these native identifiers to reduce bandwidth and cpu usage.
 
 
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
 Notes
 -----
 

trunk/Documentation/kernel-parameters.txt

@@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode

trunk/Documentation/trace/ftrace-design.txt

@@ -1,5 +1,6 @@
 		function tracer guts
 		====================
+		By Mike Frysinger
 
 Introduction
 ------------
@@ -173,14 +174,16 @@ void ftrace_graph_caller(void)
 
 	unsigned long *frompc = &...;
 	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
-	prepare_ftrace_return(frompc, selfpc);
+	/* passing frame pointer up is optional -- see below */
+	prepare_ftrace_return(frompc, selfpc, frame_pointer);
 
 	/* restore all state needed by the ABI */
 }
 #endif
 
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version.  The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information).  The only architecture-specific piece in it is the setup of
 the fault recovery table (the asm(...) code).  The rest should be the same
 across architectures.
 
@@ -205,6 +208,23 @@ void return_to_handler(void)
 #endif
 
 
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function.  On exit, the value is compared and if it does not
+match, then it will panic the kernel.  This is largely a sanity check for bad
+code generation with gcc.  If gcc for your port sanely updates the frame
+pointer under different opitmization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult.  In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
 HAVE_FTRACE_NMI_ENTER
 ---------------------
 

trunk/Documentation/trace/ftrace.txt

@@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
 
  # echo sys_nanosleep hrtimer_interrupt \
 		> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
  # echo 1 > tracing_enabled
  # usleep 1
  # echo 0 > tracing_enabled