---

yaml --- r: 233663 b: refs/heads/master c: 68e41c5 h: refs/heads/master i: 233661: 6acbe51 233659: 6ccc28f 233655: 7c5372b 233647: 31034df 233631: 55df1d4 233599: f946e4c v: v3
git-mirror · Feb 20, 2011 · 36a6cc8 · 36a6cc8
1 parent f3a8e19
commit 36a6cc8
Show file tree

Hide file tree

Showing 267 changed files with 2,844 additions and 2,801 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 638691a7a46a4ae9a7b56c603299e42d7f6e722e
+refs/heads/master: 68e41c5d032668e2905404afbef75bc58be179d6
diff --git a/trunk/.gitignore b/trunk/.gitignore
@@ -28,7 +28,6 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
-*.xz
 *.lzo
 *.patch
 *.gcno

diff --git a/trunk/Documentation/DocBook/filesystems.tmpl b/trunk/Documentation/DocBook/filesystems.tmpl
@@ -82,11 +82,6 @@
      </sect1>
   </chapter>
 
-  <chapter id="fs_events">
-     <title>Events based on file descriptors</title>
-!Efs/eventfd.c
-  </chapter>
-
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c

diff --git a/trunk/Documentation/hwmon/jc42 b/trunk/Documentation/hwmon/jc42
@@ -51,8 +51,7 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet:
-	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
+    Datasheet: -
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -61,11 +60,7 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
-which are used on many DDR3 memory modules for mobile devices and servers. Some
-systems use the sensor to prevent memory overheating by automatically throttling
-the memory controller.
-
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -86,19 +81,15 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
-If the BIOS has configured the sensor for automatic temperature management, it
-is likely that it has locked the registers, i.e., that the temperature limits
-cannot be changed.
-
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RO or RW)
-temp1_max		Maximum temperature (RO or RW)
-temp1_crit		Critical high temperature (RO or RW)
+temp1_min		Minimum temperature (RW)
+temp1_max		Maximum temperature (RW)
+temp1_crit		Critical high temperature (RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
+temp1_crit_hyst		Critical hysteresis temperature (RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

diff --git a/trunk/Documentation/hwmon/k10temp b/trunk/Documentation/hwmon/k10temp
@@ -9,8 +9,6 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -19,14 +17,10 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
-  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
-    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
-  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
-    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -40,7 +34,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h/11h/12h/14h processors.
+Family 10h and 11h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -144,11 +144,6 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
-Finally, the [KMG] suffix is commonly described after a number of kernel
-parameter values. These 'K', 'M', and 'G' letters represent the _binary_
-multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
-bytes respectively. Such letter suffixes can also be entirely omitted.
-
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -550,20 +545,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=size[KMG][@offset[KMG]]
-			[KNL] Using kexec, Linux can switch to a 'crash kernel'
-			upon panic. This parameter reserves the physical
-			memory region [offset, offset + size] for that kernel
-			image. If '@offset' is omitted, then a suitable offset
-			is selected automatically. Check
-			Documentation/kdump/kdump.txt for further details.
+	crashkernel=nn[KMG]@ss[KMG]
+			[KNL] Reserve a chunk of physical memory to
+			hold a kernel to switch to with kexec on panic.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for an example.
+			Documentation/kdump/kdump.txt for a example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1271,9 +1262,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
-			in bytes.  n must be a power of two.  The default
-			size is set in the kernel config file.
+	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
+			Format: { n | nk | nM }
+			n must be a power of two.  The default size
+			is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for

diff --git a/trunk/Documentation/networking/Makefile b/trunk/Documentation/networking/Makefile
@@ -4,8 +4,6 @@ obj- := dummy.o
 # List of programs to build
 hostprogs-y := ifenslave
 
-HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
-
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

diff --git a/trunk/Documentation/workqueue.txt b/trunk/Documentation/workqueue.txt
@@ -190,9 +190,9 @@ resources, scheduled and executed.
 	* Long running CPU intensive workloads which can be better
 	  managed by the system scheduler.
 
-  WQ_FREEZABLE
+  WQ_FREEZEABLE
 
-	A freezable wq participates in the freeze phase of the system
+	A freezeable wq participates in the freeze phase of the system
 	suspend operations.  Work items on the wq are drained and no
 	new work item starts execution until thawed.
 

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@fifo99.com>
+M:	Daniel Walker <dwalker@codeaurora.org>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -2873,6 +2873,7 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -5266,7 +5267,7 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@canonical.com>
+M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
@@ -6104,7 +6105,7 @@ S:	Maintained
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@canonical.com>
+M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc5
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -1177,31 +1177,6 @@ config ARM_ERRATA_743622
 	  visible impact on the overall performance or power consumption of the
 	  processor.
 
-config ARM_ERRATA_751472
-	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
-	depends on CPU_V7 && SMP
-	help
-	  This option enables the workaround for the 751472 Cortex-A9 (prior
-	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
-	  completion of a following broadcasted operation if the second
-	  operation is received by a CPU before the ICIALLUIS has completed,
-	  potentially leading to corrupted entries in the cache or TLB.
-
-config ARM_ERRATA_753970
-	bool "ARM errata: cache sync operation may be faulty"
-	depends on CACHE_PL310
-	help
-	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
-
-	  Under some condition the effect of cache sync operation on
-	  the store buffer still remains when the operation completes.
-	  This means that the store buffer is always asked to drain and
-	  this prevents it from merging any further writes. The workaround
-	  is to replace the normal offset of cache sync operation (0x730)
-	  by another offset targeting an unmapped PL310 register 0x740.
-	  This has the same effect as the cache sync operation: store buffer
-	  drain and waiting for all buffers empty.
-
 endmenu
 
 source "arch/arm/common/Kconfig"

diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile
@@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .comment -S
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:

diff --git a/trunk/arch/arm/boot/compressed/.gitignore b/trunk/arch/arm/boot/compressed/.gitignore
@@ -1,7 +1,3 @@
 font.c
-lib1funcs.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-vmlinux
+piggy.gz
 vmlinux.lds
diff --git a/trunk/arch/arm/include/asm/hardware/cache-l2x0.h b/trunk/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -36,7 +36,6 @@
 #define L2X0_RAW_INTR_STAT		0x21C
 #define L2X0_INTR_CLEAR			0x220
 #define L2X0_CACHE_SYNC			0x730
-#define L2X0_DUMMY_REG			0x740
 #define L2X0_INV_LINE_PA		0x770
 #define L2X0_INV_WAY			0x77C
 #define L2X0_CLEAN_LINE_PA		0x7B0

diff --git a/trunk/arch/arm/include/asm/hardware/sp810.h b/trunk/arch/arm/include/asm/hardware/sp810.h
@@ -58,9 +58,6 @@
 
 static inline void sysctl_soft_reset(void __iomem *base)
 {
-	/* switch to slow mode */
-	writel(0x2, base + SCCTRL);
-
 	/* writing any value to SCSYSSTAT reg will reset system */
 	writel(0, base + SCSYSSTAT);
 }
-Original file line number
+Diff line change
@@ Expand Up / @@ -28,7 +28,6 @@ modules.builtin @@
     *.gz
     *.bz2
     *.lzma
-    *.xz
     *.lzo
     *.patch
     *.gcno
@@ Expand Down @@