---

yaml
---
r: 251163
b: refs/heads/master
c: 0eb8e88
h: refs/heads/master
i:
  251161: adfba25
  251159: 6ea2215
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0a58e077eb600d1efd7e54ad9926a75a39d7f8ae
+refs/heads/master: 0eb8e885726a3a93206510092bbc7e39e272f6ef

trunk/Documentation/ABI/testing/sysfs-block

@@ -142,3 +142,67 @@ Description:
 		with the previous I/O request are enabled. When set to 2,
 		all merge tries are disabled. The default value is 0 -
 		which enables all types of merge tries.
+
+What:		/sys/block/<disk>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		device is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/<partition>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		partition is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/queue/discard_granularity
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space using units that are bigger
+		than the logical block size. The discard_granularity
+		parameter indicates the size of the internal allocation
+		unit in bytes if reported by the device. Otherwise the
+		discard_granularity will be set to match the device's
+		physical block size. A discard_granularity of 0 means
+		that the device does not support discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_max_bytes
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may have
+		internal limits on the number of bytes that can be
+		trimmed or unmapped in a single operation. Some storage
+		protocols also have inherent limits on the number of
+		blocks that can be described in a single command. The
+		discard_max_bytes parameter is set by the device driver
+		to the maximum number of bytes that can be discarded in
+		a single operation. Discard requests issued to the
+		device must not exceed this limit. A discard_max_bytes
+		value of 0 means that the device does not support
+		discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_zeroes_data
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may return
+		stale or random data when a previously discarded block
+		is read back. This can cause problems if the filesystem
+		expects discarded blocks to be explicitly cleared. If a
+		device reports that it deterministically returns zeroes
+		when a discarded area is read the discard_zeroes_data
+		parameter will be set to one. Otherwise it will be 0 and
+		the result of reading a discarded area is undefined.

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

trunk/arch/mips/ar7/gpio.c

@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
 		size = 0x1f;
 	}
 
-	gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
-					AR7_REGS_GPIO + 0x10);
-
+	gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
 	if (!gpch->regs) {
 		printk(KERN_ERR "%s: failed to ioremap regs\n",
 					gpch->chip.label);

trunk/arch/mips/include/asm/dma-mapping.h

@@ -5,7 +5,9 @@
 #include <asm/cache.h>
 #include <asm-generic/dma-coherent.h>
 
+#ifndef CONFIG_SGI_IP27	/* Kludge to fix 2.6.39 build for IP27 */
 #include <dma-coherence.h>
+#endif
 
 extern struct dma_map_ops *mips_dma_map_ops;
 

trunk/arch/mips/kernel/traps.c

@@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
@@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
-		sig = 0;
-
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);

trunk/arch/mips/rb532/gpio.c

@@ -185,7 +185,7 @@ int __init rb532_gpio_init(void)
 	struct resource *r;
 
 	r = rb532_gpio_reg0_res;
-	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+	rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
 
 	if (!rb532_gpio_chip->regbase) {
 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");

trunk/arch/powerpc/platforms/83xx/suspend.c

@@ -318,17 +318,20 @@ static const struct platform_suspend_ops mpc83xx_suspend_ops = {
 	.end = mpc83xx_suspend_end,
 };
 
+static struct of_device_id pmc_match[];
 static int pmc_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct pmc_type *type;
 	int ret = 0;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(pmc_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 
-	type = ofdev->dev.of_match->data;
+	type = match->data;
 
 	if (!of_device_is_available(np))
 		return -ENODEV;

trunk/arch/powerpc/sysdev/fsl_msi.c

@@ -304,8 +304,10 @@ static int __devinit fsl_msi_setup_hwirq(struct fsl_msi *msi,
 	return 0;
 }
 
+static const struct of_device_id fsl_of_msi_ids[];
 static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 {
+	const struct of_device_id *match;
 	struct fsl_msi *msi;
 	struct resource res;
 	int err, i, j, irq_index, count;
@@ -316,9 +318,10 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 	u32 offset;
 	static const u32 all_avail[] = { 0, NR_MSI_IRQS };
 
-	if (!dev->dev.of_match)
+	match = of_match_device(fsl_of_msi_ids, &dev->dev);
+	if (!match)
 		return -EINVAL;
-	features = dev->dev.of_match->data;
+	features = match->data;
 
 	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
 

trunk/arch/sparc/kernel/pci_sabre.c

@@ -452,8 +452,10 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
 	sabre_scan_bus(pbm, &op->dev);
 }
 
+static const struct of_device_id sabre_match[];
 static int __devinit sabre_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	const struct linux_prom64_registers *pr_regs;
 	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
@@ -463,7 +465,8 @@ static int __devinit sabre_probe(struct platform_device *op)
 	const u32 *vdma;
 	u64 clear_irq;
 
-	hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL);
+	match = of_match_device(sabre_match, &op->dev);
+	hummingbird_p = match && (match->data != NULL);
 	if (!hummingbird_p) {
 		struct device_node *cpu_dp;
 

trunk/arch/sparc/kernel/pci_schizo.c

@@ -1458,11 +1458,15 @@ static int __devinit __schizo_init(struct platform_device *op, unsigned long chi
 	return err;
 }
 
+static const struct of_device_id schizo_match[];
 static int __devinit schizo_probe(struct platform_device *op)
 {
-	if (!op->dev.of_match)
+	const struct of_device_id *match;
+
+	match = of_match_device(schizo_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	return __schizo_init(op, (unsigned long) op->dev.of_match->data);
+	return __schizo_init(op, (unsigned long)match->data);
 }
 
 /* The ordering of this table is very important.  Some Tomatillo