Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/u…

…sers/dvhart/linux-platform-drivers-x86

Pull x86 platform driver update from Darren Hart:
 - thinkpad-acpi: Switch to software mute, cleanups
 - acerhdf: Bang-bang thermal governor, new models, cleanups
 - dell-laptop: New keyboard backlight support and documentation
 - toshiba_acpi: Keyboard backlight updates, hotkey handling
 - dell-wmi: Keypress filtering, WMI event processing
 - eeepc-laptop: Multiple cleanups, improved error handling, documentation
 - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
 - misc: Code cleanups, quirks, various new IDs

* tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits)
  platform/x86/acerhdf: Still depends on THERMAL
  Documentation: Add entry for dell-laptop sysfs interface
  acpi: Remove _OSI(Linux) for ThinkPads
  thinkpad-acpi: Try to use full software mute control
  acerhdf: minor clean up
  acerhdf: added critical trip point
  acerhdf: Use bang-bang thermal governor
  acerhdf: Adding support for new models
  acerhdf: Adding support for "manual mode"
  dell-smo8800: Add more ACPI ids and change description of driver
  platform: x86: dell-laptop: Add support for keyboard backlight
  toshiba_acpi: Add keyboard backlight mode change event
  toshiba_acpi: Change notify funtion to handle more events
  toshiba_acpi: Move hotkey enabling code to its own function
  dell-wmi: Don't report keypresses on keybord illumination change
  dell-wmi: Don't report keypresses for radio state changes
  hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
  toshiba-acpi: Add missing ID (TOS6207)
  Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put"
  platform: x86: Deletion of checks before backlight_device_unregister()
  ...

Documentation/ABI/testing/sysfs-platform-dell-laptop

@@ -0,0 +1,60 @@
+What:		/sys/class/leds/dell::kbd_backlight/als_setting
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the automatic keyboard
+		illumination mode on some systems that have an ambient
+		light sensor. Write 1 to this file to enable the auto
+		mode, 0 to disable it.
+
+What:		/sys/class/leds/dell::kbd_backlight/start_triggers
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the input triggers that
+		turn on the keyboard backlight illumination that is
+		disabled because of inactivity.
+		Read the file to see the triggers available. The ones
+		enabled are preceded by '+', those disabled by '-'.
+
+		To enable a trigger, write its name preceded by '+' to
+		this file. To disable a trigger, write its name preceded
+		by '-' instead.
+
+		For example, to enable the keyboard as trigger run:
+		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+		To disable it:
+		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+
+		Note that not all the available triggers can be configured.
+
+What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to specify the interval after which the
+		keyboard illumination is disabled because of inactivity.
+		The timeouts are expressed in seconds, minutes, hours and
+		days, for which the symbols are 's', 'm', 'h' and 'd'
+		respectively.
+
+		To configure the timeout, write to this file a value along
+		with any the above units. If no unit is specified, the value
+		is assumed to be expressed in seconds.
+
+		For example, to set the timeout to 10 minutes run:
+		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
+
+		Note that when this file is read, the returned value might be
+		expressed in a different unit than the one used when the timeout
+		was set.
+
+		Also note that only some timeouts are supported and that
+		some systems might fall back to a specific timeout in case
+		an invalid timeout is written to this file.

drivers/acpi/blacklist.c

@@ -304,60 +304,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 	 * Linux ignores it, except for the machines enumerated below.
 	 */
 
-	/*
-	 * Lenovo has a mix of systems OSI(Linux) situations
-	 * and thus we can not wildcard the vendor.
-	 *
-	 * _OSI(Linux) helps sound
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
-	 * T400, T500
-	 * _OSI(Linux) has Linux specific hooks
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
-	 * _OSI(Linux) is a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
-	 */
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad R61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad X61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T400",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T400"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T500",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"),
-		},
-	},
 	/*
 	 * Without this this EEEpc exports a non working WMI interface, with
 	 * this it exports a working "good old" eeepc_laptop interface, fixing

drivers/platform/x86/Kconfig

@@ -38,7 +38,8 @@ config ACER_WMI
 
 config ACERHDF
 	tristate "Acer Aspire One temperature and fan driver"
-	depends on THERMAL && ACPI
+	depends on ACPI && THERMAL
+	select THERMAL_GOV_BANG_BANG
 	---help---
 	  This is a driver for Acer Aspire One netbooks. It allows to access
 	  the temperature sensor and to control the fan.
@@ -128,10 +129,10 @@ config DELL_WMI_AIO
 	  be called dell-wmi-aio.
 
 config DELL_SMO8800
-	tristate "Dell Latitude freefall driver (ACPI SMO8800/SMO8810)"
+	tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
 	depends on ACPI
 	---help---
-	  Say Y here if you want to support SMO8800/SMO8810 freefall device
+	  Say Y here if you want to support SMO88XX freefall devices
 	  on Dell Latitude laptops.
 
 	  To compile this driver as a module, choose M here: the module will