---

yaml
---
r: 144091
b: refs/heads/master
c: 6740543
h: refs/heads/master
i:
  144089: 82b446a
  144087: 80061dd
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7b806016b14532b4206b81ba16062cf82c68e430
+refs/heads/master: 67405439bca28c4dbecd3fefd97fbdb282a302d9

trunk/.gitignore

@@ -49,7 +49,6 @@ include/linux/compile.h
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
-include/generated
 
 # stgit generated dirs
 patches-*

trunk/Documentation/block/biodoc.txt

@@ -1040,21 +1040,23 @@ Front merges are handled by the binary trees in AS and deadline schedulers.
 iii. Plugging the queue to batch requests in anticipation of opportunities for
      merge/sort optimizations
 
+This is just the same as in 2.4 so far, though per-device unplugging
+support is anticipated for 2.5. Also with a priority-based i/o scheduler,
+such decisions could be based on request priorities.
+
 Plugging is an approach that the current i/o scheduling algorithm resorts to so
 that it collects up enough requests in the queue to be able to take
 advantage of the sorting/merging logic in the elevator. If the
 queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bath tub of a vessel to get fluid to build up)
+(sort of like plugging the bottom of a vessel to get fluid to build up)
 till it fills up with a few more requests, before starting to service
 the requests. This provides an opportunity to merge/sort the requests before
 passing them down to the device. There are various conditions when the queue is
 unplugged (to open up the flow again), either through a scheduled task or
 could be on demand. For example wait_on_buffer sets the unplugging going
-through sync_buffer() running blk_run_address_space(mapping). Or the caller
-can do it explicity through blk_unplug(bdev). So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion on that
-buffer. For page driven IO, the address space ->sync_page() takes care of
-doing the blk_run_address_space().
+(by running tq_disk) so the read gets satisfied soon. So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion,
+in fact all queues get unplugged as a side-effect.
 
 Aside:
   This is kind of controversial territory, as it's not clear if plugging is
@@ -1065,6 +1067,11 @@ Aside:
   multi-page bios being queued in one shot, we may not need to wait to merge
   a big request from the broken up pieces coming by.
 
+  Per-queue granularity unplugging (still a Todo) may help reduce some of the
+  concerns with just a single tq_disk flush approach. Something like
+  blk_kick_queue() to unplug a specific queue (right away ?)
+  or optionally, all queues, is in the plan.
+
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,

trunk/Documentation/driver-model/platform.txt

@@ -169,62 +169,3 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
-
-Early Platform Devices and Drivers
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The early platform interfaces provide platform data to platform device
-drivers early on during the system boot. The code is built on top of the
-early_param() command line parsing and can be executed very early on.
-
-Example: "earlyprintk" class early serial console in 6 steps
-
-1. Registering early platform device data
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code registers platform device data using the function
-early_platform_add_devices(). In the case of early serial console this
-should be hardware configuration for the serial port. Devices registered
-at this point will later on be matched against early platform drivers.
-
-2. Parsing kernel command line
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code calls parse_early_param() to parse the kernel
-command line. This will execute all matching early_param() callbacks.
-User specified early platform devices will be registered at this point.
-For the early serial console case the user can specify port on the
-kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
-0 is the platform device id. If the id is -1 then the dot and the
-id can be omitted.
-
-3. Installing early platform drivers belonging to a certain class
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code may optionally force registration of all early
-platform drivers belonging to a certain class using the function
-early_platform_driver_register_all(). User specified devices from
-step 2 have priority over these. This step is omitted by the serial
-driver example since the early serial driver code should be disabled
-unless the user has specified port on the kernel command line.
-
-4. Early platform driver registration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Compiled-in platform drivers making use of early_platform_init() are
-automatically registered during step 2 or 3. The serial driver example
-should use early_platform_init("earlyprintk", &platform_driver).
-
-5. Probing of early platform drivers belonging to a certain class
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code calls early_platform_driver_probe() to match
-registered early platform devices associated with a certain class with
-registered early platform drivers. Matched devices will get probed().
-This step can be executed at any point during the early boot. As soon
-as possible may be good for the serial port case.
-
-6. Inside the early platform driver probe()
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The driver code needs to take special care during early boot, especially
-when it comes to memory allocation and interrupt registration. The code
-in the probe() function can use is_early_platform_device() to check if
-it is called at early platform device or at the regular platform device
-time. The early serial driver performs register_console() at this point.
-
-For further information, see <linux/platform_device.h>.

trunk/Documentation/filesystems/pohmelfs/design_notes.txt

@@ -56,10 +56,9 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them according to IO priorities.
+operations (like lookups or directory listings) between them.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
-with write permission turned on. IO priority and permissions can be changed in run-time.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode

trunk/Documentation/filesystems/pohmelfs/info.txt

@@ -1,8 +1,6 @@
 POHMELFS usage information.
 
-Mount options.
-All but index, number of crypto threads and maximum IO size can changed via remount.
-
+Mount options:
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -54,27 +52,16 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add server server1.net:1025 into the working set with index $idx
+Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
-$cfg A modify -a server1.net -p 1025 -i $idx -I 1
-
-Change IO priority to 123 (node with the highest priority gets read requests).
-$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+One can add or remove servers from working set after mounting too.
 
-One can check currect status of all connections in the mountstats file:
-# cat /proc/$PID/mountstats
-...
-device none mounted on /mnt with fstype pohmel
-idx addr(:port) socket_type protocol active priority permissions
-0 server1.net:1026 1 6 1 250 1
-0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 

trunk/Documentation/filesystems/vfs.txt

@@ -277,7 +277,8 @@ or bottom half).
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics.
+  statfs: called when the VFS needs to get filesystem statistics. This
+	is called with the kernel lock held
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held

trunk/Documentation/kbuild/makefiles.txt

@@ -316,16 +316,6 @@ more details, with real examples.
 		#arch/m68k/fpsp040/Makefile
 		ldflags-y := -x
 
-    subdir-ccflags-y, subdir-asflags-y
-	The two flags listed above are similar to ccflags-y and as-falgs-y.
-	The difference is that the subdir- variants has effect for the kbuild
-	file where tey are present and all subdirectories.
-	Options specified using subdir-* are added to the commandline before
-	the options specified using the non-subdir variants.
-
-	Example:
-		subdir-ccflags-y := -Werror
-
     CFLAGS_$@, AFLAGS_$@
 
 	CFLAGS_$@ and AFLAGS_$@ only apply to commands in current