---

yaml
---
r: 168682
b: refs/heads/master
c: a044a1b
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 112a674f2f68b17ae253fe7312afc38c3e75be7a
+refs/heads/master: a044a1b147a1c967e1a4b797c3e24c395f3d878a

trunk/Documentation/vm/page-types.c

@@ -218,7 +218,7 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
 {
 	int fd = open(pathname, flags);
 

trunk/Makefile

@@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 HOSTCXXFLAGS = -O2
 
 # Decide whether to build built-in, modular, or both.

trunk/arch/alpha/boot/tools/objstrip.c

@@ -35,7 +35,7 @@
 const char * prog_name;
 
 
-void
+static void
 usage (void)
 {
     fprintf(stderr,

trunk/arch/alpha/include/asm/fcntl.h

@@ -26,8 +26,6 @@
 #define F_GETOWN	6	/*  for sockets. */
 #define F_SETSIG	10	/*  for sockets. */
 #define F_GETSIG	11	/*  for sockets. */
-#define F_SETOWN_EX	15
-#define F_GETOWN_EX	16
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		1

trunk/arch/arm/mach-at91/Kconfig

@@ -289,13 +289,6 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
-config MACH_AT91SAM9G20EK_2MMC
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  Rev A or B modified for 2 MMC Slots.
-
 endif
 
 # ----------------------------------------------------------
@@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	depends on ARCH_AT91SAM9G20
 	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).

trunk/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PC12,
+	.phy_irq_pin	= AT91_PIN_PB0,
 	.is_rmii	= 1,
 };
 
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
  */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC2,
 		.wp_pin		= -ENODEV,
 	},
 	.slot[1] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC9,
 		.wp_pin		= -ENODEV,
 	},
 
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,	/* Only one slot so use slot B */
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
 };
 #endif
 
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
 	{	/* "bottom" led, green, userled1 to be defined */
 		.name			= "ds5",
-		.gpio			= AT91_PIN_PB12,
+		.gpio			= AT91_PIN_PB8,
 		.active_low		= 1,
 		.default_trigger	= "none",
 	},
 	{	/* "power" led, yellow */
 		.name			= "ds1",
-		.gpio			= AT91_PIN_PB13,
+		.gpio			= AT91_PIN_PB9,
 		.default_trigger	= "heartbeat",
 	}
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);
+#else
+	at91_add_device_mmc(0, &ek_mmc_data);
+#endif
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */

trunk/arch/parisc/include/asm/fcntl.h

@@ -28,8 +28,6 @@
 #define F_SETOWN	12	/*  for sockets. */
 #define F_SETSIG	13	/*  for sockets. */
 #define F_GETSIG	14	/*  for sockets. */
-#define F_GETOWN_EX	15
-#define F_SETOWN_EX	16
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		01

trunk/arch/powerpc/boot/addRamDisk.c

@@ -58,20 +58,20 @@ static int check_elf64(void *p, int size, struct addr_range *r)
 
 	return 64;
 }
-void get4k(FILE *file, char *buf )
+static void get4k(FILE *file, char *buf )
 {
 	unsigned j;
 	unsigned num = fread(buf, 1, 4096, file);
 	for ( j=num; j<4096; ++j )
 		buf[j] = 0;
 }
 
-void put4k(FILE *file, char *buf )
+static void put4k(FILE *file, char *buf )
 {
 	fwrite(buf, 1, 4096, file);
 }
 
-void death(const char *msg, FILE *fdesc, const char *fname) 
+static void death(const char *msg, FILE *fdesc, const char *fname)
 {
 	fprintf(stderr, msg);
 	fclose(fdesc);

trunk/arch/sparc/boot/btfixupprep.c

@@ -61,14 +61,14 @@ unsigned long lastfoffset = -1;
 unsigned long lastfrelno;
 btfixup *lastf;
 
-void fatal(void) __attribute__((noreturn));
-void fatal(void)
+static void fatal(void) __attribute__((noreturn));
+static void fatal(void)
 {
 	fprintf(stderr, "Malformed output from objdump\n%s\n", buffer);
 	exit(1);
 }
 
-btfixup *find(int type, char *name)
+static btfixup *find(int type, char *name)
 {
 	int i;
 	for (i = 0; i < last; i++) {
@@ -88,7 +88,7 @@ btfixup *find(int type, char *name)
 	return array + last - 1;
 }
 
-void set_mode (char *buffer)
+static void set_mode (char *buffer)
 {
   	for (mode = 0;; mode++)
 		if (buffer[mode] < '0' || buffer[mode] > '9')

trunk/arch/sparc/boot/piggyback_32.c

@@ -35,33 +35,33 @@
  * as PROM looks for a.out image only.
  */
 
-unsigned short ld2(char *p)
+static unsigned short ld2(char *p)
 {
 	return (p[0] << 8) | p[1];
 }
 
-unsigned int ld4(char *p)
+static unsigned int ld4(char *p)
 {
 	return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3];
 }
 
-void st4(char *p, unsigned int x)
+static void st4(char *p, unsigned int x)
 {
 	p[0] = x >> 24;
 	p[1] = x >> 16;
 	p[2] = x >> 8;
 	p[3] = x;
 }
 
-void usage(void)
+static void usage(void)
 {
 	/* fs_img.gz is an image of initial ramdisk. */
 	fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n");
 	fprintf(stderr, "\tKernel image will be modified in place.\n");
 	exit(1);
 }
 
-void die(char *str)
+static void die(char *str)
 {
 	perror (str);
 	exit(1);

trunk/arch/sparc/boot/piggyback_64.c

@@ -32,7 +32,7 @@
 /* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly
    usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */
 
-void die(char *str)
+static void die(char *str)
 {
 	perror (str);
 	exit(1);

trunk/drivers/gpu/drm/radeon/mkregtable.c

@@ -561,7 +561,7 @@ struct table {
 	char *gpu_prefix;
 };
 
-struct offset *offset_new(unsigned o)
+static struct offset *offset_new(unsigned o)
 {
 	struct offset *offset;
 
@@ -573,20 +573,20 @@ struct offset *offset_new(unsigned o)
 	return offset;
 }
 
-void table_offset_add(struct table *t, struct offset *offset)
+static void table_offset_add(struct table *t, struct offset *offset)
 {
 	list_add_tail(&offset->list, &t->offsets);
 }
 
-void table_init(struct table *t)
+static void table_init(struct table *t)
 {
 	INIT_LIST_HEAD(&t->offsets);
 	t->offset_max = 0;
 	t->nentry = 0;
 	t->table = NULL;
 }
 
-void table_print(struct table *t)
+static void table_print(struct table *t)
 {
 	unsigned nlloop, i, j, n, c, id;
 
@@ -611,7 +611,7 @@ void table_print(struct table *t)
 	printf("};\n");
 }
 
-int table_build(struct table *t)
+static int table_build(struct table *t)
 {
 	struct offset *offset;
 	unsigned i, m;
@@ -631,7 +631,7 @@ int table_build(struct table *t)
 }
 
 static char gpu_name[10];
-int parser_auth(struct table *t, const char *filename)
+static int parser_auth(struct table *t, const char *filename)
 {
 	FILE *file;
 	regex_t mask_rex;

trunk/drivers/hwmon/adt7475.c

@@ -350,8 +350,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 
 	case FAULT:
 		/* Note - only for remote1 and remote2 */
-		out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
-		out = out ? 0 : 1;
+		out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000));
 		break;
 
 	default:
@@ -863,7 +862,7 @@ static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
 			    set_pwmfreq, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
 			    set_pwmctrl, INPUT, 0);
-static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
 			    show_pwmchan, set_pwmchan, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 0);
@@ -875,7 +874,7 @@ static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
 			    set_pwmfreq, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
 			    set_pwmctrl, INPUT, 1);
-static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
 			    show_pwmchan, set_pwmchan, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 1);
@@ -887,7 +886,7 @@ static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
 			    set_pwmfreq, INPUT, 2);
 static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
 			    set_pwmctrl, INPUT, 2);
-static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR,
 			    show_pwmchan, set_pwmchan, INPUT, 2);
 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 2);
@@ -947,19 +946,19 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
 	NULL,
@@ -1152,7 +1151,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 	}
 
 	/* Limits and settings, should never change update every 60 seconds */
-	if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+	if (time_after(jiffies, data->limits_updated + HZ * 60) ||
 	    !data->valid) {
 		data->config5 = adt7475_read(REG_CONFIG5);