---

yaml
---
r: 299746
b: refs/heads/master
c: eae1415
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a882a4d053847f9fb148905f416fd85b20bb88fa
+refs/heads/master: eae1415dda93fd4edcce0637aa64b3c9b567563f

trunk/Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines three special key types:
+ (*) The key service defines two special key types:
 
      (+) "keyring"
 
@@ -137,18 +137,6 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
-     (+) "logon"
-
-	 Like a "user" key, a "logon" key has a payload that is an arbitrary
-	 blob of data. It is intended as a place to store secrets which are
-	 accessible to the kernel but not to userspace programs.
-
-	 The description can be arbitrary, but must be prefixed with a non-zero
-	 length string that describes the key "subclass". The subclass is
-	 separated from the rest of the description by a ':'. "logon" keys can
-	 be created and updated from userspace, but the payload is only
-	 readable from kernel space.
-
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

trunk/MAINTAINERS

@@ -3592,7 +3592,6 @@ S:	Supported
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -7579,8 +7578,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Anirudha Sarangi <anirudh@xilinx.com>
-M:	John Linn <John.Linn@xilinx.com>
+M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
+M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

trunk/arch/arm/kernel/smp_twd.c

@@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
+	 *
+	 * Only wait for it to finish, if the cpu is active to avoid
+	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
+	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-			NULL, 1);
+					 NULL, cpu_active(freqs->cpu));
 
 	return NOTIFY_OK;
 }

trunk/arch/arm/mach-ux500/mbox-db5500.c

@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {

trunk/arch/blackfin/mach-bf538/boards/ezkit.c

@@ -38,7 +38,7 @@ static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
-#endif	/* CONFIG_RTC_DRV_BFIN */
+#endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = {
 		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_UART0 */
+#endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
@@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = {
 		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_UART1 */
+#endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
 static struct resource bfin_uart2_resources[] = {
 	{
@@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = {
 		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_UART2 */
-#endif	/* CONFIG_SERIAL_BFIN */
+#endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
 	.resource = bfin_sir0_resources,
 };
-#endif	/* CONFIG_BFIN_SIR0 */
+#endif
 #ifdef CONFIG_BFIN_SIR1
 static struct resource bfin_sir1_resources[] = {
 	{
@@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
 	.resource = bfin_sir1_resources,
 };
-#endif	/* CONFIG_BFIN_SIR1 */
+#endif
 #ifdef CONFIG_BFIN_SIR2
 static struct resource bfin_sir2_resources[] = {
 	{
@@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
 	.resource = bfin_sir2_resources,
 };
-#endif	/* CONFIG_BFIN_SIR2 */
-#endif	/* CONFIG_BFIN_SIR */
+#endif
+#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
@@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = {
 		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
+#endif
 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 static struct resource bfin_sport1_uart_resources[] = {
 	{
@@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = {
 		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
+#endif
 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 static struct resource bfin_sport2_uart_resources[] = {
 	{
@@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = {
 		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
+#endif
 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 static struct resource bfin_sport3_uart_resources[] = {
 	{
@@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = {
 		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
-#endif	/* CONFIG_SERIAL_BFIN_SPORT */
+#endif
+#endif
 
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 static unsigned short bfin_can_peripherals[] = {
@@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = {
 		.platform_data = &bfin_can_peripherals, /* Passed to driver */
 	},
 };
-#endif	/* CONFIG_CAN_BFIN */
+#endif
 
 /*
  *  USB-LAN EzExtender board
@@ -488,7 +488,7 @@ static struct platform_device smc91x_device = {
 		.platform_data	= &smc91x_info,
 	},
 };
-#endif	/* CONFIG_SMC91X */
+#endif
 
 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
@@ -518,8 +518,7 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 };
-#endif	/* CONFIG_MTD_M25P80 */
-#endif	/* CONFIG_SPI_BFIN5XX */
+#endif
 
 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 #include <linux/spi/ad7879.h>
@@ -536,7 +535,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.gpio_export		= 1,	/* Export GPIO to gpiolib */
 	.gpio_base		= -1,	/* Dynamic allocation */
 };
-#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
+#endif
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
@@ -565,7 +564,7 @@ static struct platform_device bfin_lq035q1_device = {
 		.platform_data = &bfin_lq035q1_data,
 	},
 };
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
+#endif
 
 static struct spi_board_info bf538_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
@@ -580,7 +579,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
-#endif	/* CONFIG_MTD_M25P80 */
+#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 	{
 		.modalias = "ad7879",
@@ -591,7 +590,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 1,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
+#endif
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 	{
 		.modalias = "bfin-lq035q1-spi",
@@ -600,15 +599,15 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 2,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
+#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 1,
 	},
-#endif	/* CONFIG_SPI_SPIDEV */
+#endif
 };
 
 /* SPI (0) */
@@ -717,6 +716,8 @@ static struct platform_device bf538_spi_master2 = {
 		},
 };
 
+#endif  /* spi master and devices */
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -758,8 +759,8 @@ static struct platform_device i2c_bfin_twi1_device = {
 	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
 	.resource = bfin_twi1_resource,
 };
-#endif	/* CONFIG_BF542 */
-#endif	/* CONFIG_I2C_BLACKFIN_TWI */
+#endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>

trunk/arch/hexagon/kernel/dma.c

@@ -22,7 +22,6 @@
 #include <linux/bootmem.h>
 #include <linux/genalloc.h>
 #include <asm/dma-mapping.h>
-#include <linux/module.h>
 
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);

trunk/arch/hexagon/kernel/process.c

@@ -1,7 +1,7 @@
 /*
  * Process creation support for Hexagon
  *
- * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle;
 void cpu_idle(void)
 {
 	while (1) {
-		tick_nohz_idle_enter();
+		tick_nohz_stop_sched_tick(1);
 		local_irq_disable();
 		while (!need_resched()) {
 			idle_sleep();
@@ -97,7 +97,7 @@ void cpu_idle(void)
 			local_irq_disable();
 		}
 		local_irq_enable();
-		tick_nohz_idle_exit();
+		tick_nohz_restart_sched_tick();
 		schedule();
 	}
 }

trunk/arch/hexagon/kernel/ptrace.c

@@ -28,7 +28,6 @@
 #include <linux/ptrace.h>
 #include <linux/regset.h>
 #include <linux/user.h>
-#include <linux/elf.h>
 
 #include <asm/user.h>
 

trunk/arch/hexagon/kernel/smp.c

@@ -1,7 +1,7 @@
 /*
  * SMP support for Hexagon
  *
- * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -28,7 +28,6 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
-#include <linux/cpu.h>
 
 #include <asm/time.h>    /*  timer_interrupt  */
 #include <asm/hexagon_vm.h>
@@ -178,12 +177,7 @@ void __cpuinit start_secondary(void)
 
 	printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
 
-	notify_cpu_starting(cpu);
-
-	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	ipi_call_unlock();
-
 	local_irq_enable();
 
 	cpu_idle();

trunk/arch/hexagon/kernel/time.c

@@ -28,7 +28,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/module.h>
 
 #include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>

trunk/arch/hexagon/kernel/vdso.c

@@ -21,7 +21,6 @@
 #include <linux/err.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
-#include <linux/binfmts.h>
 
 #include <asm/vdso.h>