sh: SH-2007 board support.

This patch series adds support for ITO Co., Ltd.'s SH-2007 reference
platform (A PC-104 based SH7780 platform).

This is a direct port of the out-of-tree board support from the vendor's
kernel, originally located at:

	http://ms-n.org/sh-linux/kernel/

More information on the board and the vendor can be obtained from the
vendor's site at:

	http://www.itonet.co.jp/

Presently supported peripherals are CF and ethernet, with support for
the on-board IDE still pending further testing.

Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/Kconfig

@@ -309,6 +309,17 @@ config SH_POLARIS
 	help
 	  Select if configuring for an SMSC Polaris development board
 
+config SH_SH2007
+	bool "SH-2007 board"
+	select NO_IOPORT
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  SH-2007 is a single-board computer based around SH7780 chip
+	  intended for embedded applications.
+	  It has an Ethernet interface (SMC9118), direct connected
+	  Compact Flash socket, two serial ports and PC-104 bus.
+	  More information at <http://sh2000.sh-linux.org>.
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"

arch/sh/boards/Makefile

@@ -2,6 +2,7 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o

arch/sh/boards/board-sh2007.c

@@ -0,0 +1,133 @@
+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004  SUGIOKA Toshinobu
+ * Copyright (C) 2010  Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+struct smsc911x_platform_config smc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+	[0] = {
+		.start	= SMC0_BASE,
+		.end	= SMC0_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource smsc9118_1_resources[] = {
+	[0] = {
+		.start	= SMC1_BASE,
+		.end	= SMC1_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x280),
+		.end	= evt2irq(0x280),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_0_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc9118_0_resources),
+	.resource	= smsc9118_0_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platform_device smsc9118_1_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(smsc9118_1_resources),
+	.resource	= smsc9118_1_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE + CF_OFFSET,
+		.end	= CF_BASE + CF_OFFSET + 0x0f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CF_BASE + CF_OFFSET + 0x206,
+		.end	= CF_BASE + CF_OFFSET + 0x20f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= evt2irq(0x2c0),
+		.end	= evt2irq(0x2c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_device  = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+	.resource	= cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+	&smsc9118_0_device,
+	&smsc9118_1_device,
+	&cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+	platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+	return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "SH-2007 Setup...");
+
+	/* setup wait control registers for area 5 */
+	__raw_writel(CS5BCR_D, CS5BCR);
+	__raw_writel(CS5WCR_D, CS5WCR);
+	__raw_writel(CS5PCR_D, CS5PCR);
+
+	printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+	.mv_setup		= sh2007_setup,
+	.mv_name		= "sh2007",
+	.mv_init_irq		= sh2007_init_irq,
+};