ixgbe: remove unused fcoe.tc field and fcoe_setapp()

The fcoe.tc field is no longer used so remove it. After
the field is removed there is no need to keep fcoe_setapp()
around so remove it as well. And finally we can get rid
of some DCB #ifdef's in the fcoe code.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ixgbe/ixgbe_dcb_nl.c

@@ -357,7 +357,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
 			usleep_range(1000, 2000);
 
-		ixgbe_fcoe_setapp(adapter, up);
+		adapter->fcoe.up = ffs(up) - 1;
 
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_stop(netdev);

drivers/net/ixgbe/ixgbe_fcoe.c

@@ -26,9 +26,6 @@
 *******************************************************************************/
 
 #include "ixgbe.h"
-#ifdef CONFIG_IXGBE_DCB
-#include "ixgbe_dcb_82599.h"
-#endif /* CONFIG_IXGBE_DCB */
 #include <linux/if_ether.h>
 #include <linux/gfp.h>
 #include <linux/if_vlan.h>
@@ -625,10 +622,6 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
 	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
-#ifdef CONFIG_IXGBE_DCB
-	u8 tc;
-	u32 up2tc;
-#endif
 
 	if (!fcoe->pool) {
 		spin_lock_init(&fcoe->lock);
@@ -694,18 +687,6 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 			IXGBE_FCRXCTRL_FCOELLI |
 			IXGBE_FCRXCTRL_FCCRCBO |
 			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
-#ifdef CONFIG_IXGBE_DCB
-	up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
-	for (i = 0; i < MAX_USER_PRIORITY; i++) {
-		tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT));
-		tc &= (MAX_TRAFFIC_CLASS - 1);
-		if (fcoe->tc == tc) {
-			fcoe->up = i;
-			break;
-		}
-	}
-#endif
-
 	return;
 
 out_extra_ddp_buffer:
@@ -833,41 +814,6 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
 	return rc;
 }
 
-#ifdef CONFIG_IXGBE_DCB
-/**
- * ixgbe_fcoe_setapp - sets the user priority bitmap for FCoE
- * @adapter : ixgbe adapter
- * @up : 802.1p user priority bitmap
- *
- * Finds out the traffic class from the input user priority
- * bitmap for FCoE.
- *
- * Returns : 0 on success otherwise returns 1 on error
- */
-u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up)
-{
-	int i;
-	u32 up2tc;
-
-	/* valid user priority bitmap must not be 0 */
-	if (up) {
-		/* from user priority to the corresponding traffic class */
-		up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
-		for (i = 0; i < MAX_USER_PRIORITY; i++) {
-			if (up & (1 << i)) {
-				up2tc >>= (i * IXGBE_RTTUP2TC_UP_SHIFT);
-				up2tc &= (MAX_TRAFFIC_CLASS - 1);
-				adapter->fcoe.tc = (u8)up2tc;
-				adapter->fcoe.up = i;
-				return 0;
-			}
-		}
-	}
-
-	return 1;
-}
-#endif /* CONFIG_IXGBE_DCB */
-
 /**
  * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
  * @netdev : ixgbe adapter

drivers/net/ixgbe/ixgbe_fcoe.h

@@ -74,7 +74,6 @@ struct ixgbe_fcoe {
 	dma_addr_t extra_ddp_buffer_dma;
 	unsigned long mode;
 #ifdef CONFIG_IXGBE_DCB
-	u8 tc;
 	u8 up;
 #endif
 };

drivers/net/ixgbe/ixgbe_main.c

@@ -5169,7 +5169,6 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->ring_feature[RING_F_FCOE].indices = 0;
 #ifdef CONFIG_IXGBE_DCB
 		/* Default traffic class to use for FCoE */
-		adapter->fcoe.tc = IXGBE_FCOE_DEFTC;
 		adapter->fcoe.up = IXGBE_FCOE_DEFTC;
 #endif
 #endif /* IXGBE_FCOE */