---

yaml
---
r: 146119
b: refs/heads/master
c: 2e8844e
h: refs/heads/master
i:
  146117: 1a8f28b
  146115: cb3c032
  146111: 228623d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c78a3956b982418186e40978a51636a2b43221bc
+refs/heads/master: 2e8844e13ab73f1107aea4317a53ff5879f2e1d7

trunk/CREDITS

@@ -495,6 +495,11 @@ S: Kopmansg 2
 S: 411 13  Goteborg
 S: Sweden
 
+N: Paul Bristow
+E: paul@paulbristow.net
+W: http://paulbristow.net/linux/idefloppy.html
+D: Maintainer of IDE/ATAPI floppy driver
+
 N: Dominik Brodowski
 E: linux@brodo.de
 W: http://www.brodo.de/
@@ -1407,8 +1412,8 @@ P: 1024D/77D4FC9B F5C5 1C20 1DFC DEC3 3107  54A4 2332 ADFC 77D4 FC9B
 D: National Language Support
 D: Linux Internationalization Project
 D: German Localization for Linux and GNU software
-S: Kriemhildring 12a
-S: 65795 Hattersheim am Main
+S: Auf der Fittel 18
+S: 53347 Alfter
 S: Germany
 
 N: Christoph Hellwig
@@ -2642,6 +2647,10 @@ S: C/ Mieses 20, 9-B
 S: Valladolid 47009
 S: Spain
 
+N: Gadi Oxman
+E: gadio@netvision.net.il
+D: Original author and maintainer of IDE/ATAPI floppy/tape drivers
+
 N: Greg Page
 E: gpage@sovereign.org
 D: IPX development and support
@@ -3571,6 +3580,12 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Riku Voipio
+E: riku.voipio@iki.fi
+D: Author of PCA9532 LED and Fintek f75375s hwmon driver
+D: Some random ARM board patches
+S: Finland
+
 N: Patrick Volkerding
 E: volkerdi@ftp.cdrom.com
 D: Produced the Slackware distribution, updated the SVGAlib
@@ -3738,7 +3753,7 @@ S: 93149 Nittenau
 S: Germany
 
 N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
 D: Ralink rt2x00 WLAN driver
 D: Minix V2 file-system
 D: Misc fixes

trunk/Documentation/00-INDEX

@@ -86,6 +86,8 @@ cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
+cgroups/
+	- cgroups features, including cpusets and memory controller.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -98,8 +100,6 @@ cpu-load.txt
 	- document describing how CPU load statistics are collected.
 cpuidle/
 	- info on CPU_IDLE, CPU idle state management subsystem.
-cpusets.txt
-	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
 cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
 cris/

trunk/Documentation/ABI/testing/ima_policy

@@ -0,0 +1,61 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure
+		condition:= base | lsm
+			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			fsmagic:= hex value
+			uid:= decimal value
+		lsm:  	are LSM specific
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=INODE_PERM mask=MAY_READ uid=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in inode_permission.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xF97CFF8C
+
+			dont_measure obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
+			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=INODE_PERM mask=MAY_READ

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -41,6 +41,49 @@ Description:
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
 
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+		Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>
@@ -52,3 +95,30 @@ Description:
 		that some devices may have malformatted data.  If the
 		underlying VPD has a writable section then the
 		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.

trunk/Documentation/ABI/testing/sysfs-class-regulator

@@ -4,8 +4,8 @@ KernelVersion:	2.6.26
 Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
-		state. This reports the regulator enable status, for
-		regulators which can report that value.
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
 
 		This will be one of the following strings:
 
@@ -14,16 +14,54 @@ Description:
 		'unknown'
 
 		'enabled' means the regulator output is ON and is supplying
-		power to the system.
+		power to the system (assuming no error prevents it).
 
 		'disabled' means the regulator output is OFF and is not
-		supplying power to the system..
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
 
 		NOTE: this field can be used in conjunction with microvolts
-		and microamps to determine regulator output levels.
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			off
+			on
+			error
+			fast
+			normal
+			idle
+			standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
 
 
 What:		/sys/class/regulator/.../type
@@ -58,7 +96,7 @@ Description:
 		Some regulator directories will contain a field called
 		microvolts. This holds the regulator output voltage setting
 		measured in microvolts (i.e. E-6 Volts), for regulators
-		which can report that voltage.
+		which can report the control input for voltage.
 
 		NOTE: This value should not be used to determine the regulator
 		output voltage level as this value is the same regardless of
@@ -73,7 +111,7 @@ Description:
 		Some regulator directories will contain a field called
 		microamps. This holds the regulator output current limit
 		setting measured in microamps (i.e. E-6 Amps), for regulators
-		which can report that current.
+		which can report the control input for a current limit.
 
 		NOTE: This value should not be used to determine the regulator
 		output current level as this value is the same regardless of
@@ -87,7 +125,7 @@ Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
 		opmode. This holds the current regulator operating mode,
-		for regulators which can report it.
+		for regulators which can report that control input value.
 
 		The opmode value can be one of the following strings:
 
@@ -101,7 +139,8 @@ Description:
 
 		NOTE: This value should not be used to determine the regulator
 		output operating mode as this value is the same regardless of
-		whether the regulator is enabled or disabled.
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
 
 
 What:		/sys/class/regulator/.../min_microvolts