---

yaml
---
r: 26503
b: refs/heads/master
c: 6fc56cc
h: refs/heads/master
i:
  26501: 4c045d5
  26499: 45b4180
  26495: 7bd44c4
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 920e70c5c603ada05dd480ca0ccc0ae12a5fdc39
+refs/heads/master: 6fc56ccfe44c8bc3fb47d6346c12c3b865756ef8

trunk/CREDITS

@@ -1194,15 +1194,9 @@ S: Brecksville, OH  44141-1334
 S: USA
 
 N: Tristan Greaves
-E: Tristan.Greaves@icl.com
-E: tmg296@ecs.soton.ac.uk
-W: http://www.ecs.soton.ac.uk/~tmg296
+E: tristan@extricate.org
+W: http://www.extricate.org/
 D: Miscellaneous ipv4 sysctl patches
-S: 15 Little Mead
-S: Denmead
-S: Hampshire
-S: PO7 6HS
-S: United Kingdom
 
 N: Michael A. Griffith
 E: grif@cs.ucr.edu

trunk/Documentation/sound/alsa/Audiophile-Usb.txt

@@ -1,4 +1,4 @@
-	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.2
+	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.3
 	========================================================
 
 	    Thibault Le Meur <Thibault.LeMeur@supelec.fr>
@@ -22,16 +22,16 @@ The device has 4 audio interfaces, and 2 MIDI ports:
  * Midi In (Mi)
  * Midi Out (Mo)
 
-The internal DAC/ADC has the following caracteristics:
+The internal DAC/ADC has the following characteristics:
 * sample depth of 16 or 24 bits
 * sample rate from 8kHz to 96kHz
-* Two ports can't use different sample depths at the same time.Moreover, the 
+* Two ports can't use different sample depths at the same time. Moreover, the 
 Audiophile USB documentation gives the following Warning: "Please exit any 
 audio application running before switching between bit depths"
 
 Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be 
 activated at the same time depending on the audio mode selected:
- * 16-bit/48kHz ==> 4 channels in/ 4 channels out
+ * 16-bit/48kHz ==> 4 channels in/4 channels out
    - Ai+Ao+Di+Do
  * 24-bit/48kHz ==> 4 channels in/2 channels out, 
                     or 2 channels in/4 channels out
@@ -41,8 +41,8 @@ activated at the same time depending on the audio mode selected:
 
 Important facts about the Digital interface:
 --------------------------------------------
- * The Do port additionnaly supports surround-encoded AC-3 and DTS passthrough, 
-though I haven't tested it under linux
+ * The Do port additionally supports surround-encoded AC-3 and DTS passthrough, 
+though I haven't tested it under Linux
    - Note that in this setup only the Do interface can be enabled
  * Apart from recording an audio digital stream, enabling the Di port is a way 
 to synchronize the device to an external sample clock
@@ -60,24 +60,23 @@ synchronization error (for instance sound played at an odd sample rate)
 The Audiophile USB MIDI ports will be automatically supported once the 
 following modules have been loaded:
  * snd-usb-audio
- * snd-seq
  * snd-seq-midi
 
-No additionnal setting is required.
+No additional setting is required.
 
 2.2 - Audio ports
 -----------------
 
 Audio functions of the Audiophile USB device are handled by the snd-usb-audio 
 module. This module can work in a default mode (without any device-specific 
-parameter), or in an advanced mode with the device-specific parameter called 
+parameter), or in an "advanced" mode with the device-specific parameter called 
 "device_setup".
 
 2.2.1 - Default Alsa driver mode
 
-The default behaviour of the snd-usb-audio driver is to parse the device 
+The default behavior of the snd-usb-audio driver is to parse the device 
 capabilities at startup and enable all functions inside the device (including 
-all ports at any sample rates and any sample depths supported). This approach 
+all ports at any supported sample rates and sample depths). This approach 
 has the advantage to let the driver easily switch from sample rates/depths 
 automatically according to the need of the application claiming the device.
 
@@ -114,9 +113,9 @@ gain).
 For people having this problem, the snd-usb-audio module has a new module 
 parameter called "device_setup".
 
-2.2.2.1 - Initializing the working mode of the Audiohile USB
+2.2.2.1 - Initializing the working mode of the Audiophile USB
 
-As far as the Audiohile USB device is concerned, this value let the user 
+As far as the Audiophile USB device is concerned, this value let the user 
 specify:
  * the sample depth
  * the sample rate
@@ -174,20 +173,20 @@ The parameter can be given:
 
 IMPORTANT NOTE WHEN SWITCHING CONFIGURATION:
 -------------------------------------------
- * You may need to _first_ intialize the module with the correct device_setup 
+ * You may need to _first_ initialize the module with the correct device_setup 
    parameter and _only_after_ turn on the Audiophile USB device
  * This is especially true when switching the sample depth:
-   - first trun off the device
-   - de-register the snd-usb-audio module
-   - change the device_setup parameter (by either manually reprobing the module 
-     or changing modprobe.conf)
+   - first turn off the device
+   - de-register the snd-usb-audio module (modprobe -r)
+   - change the device_setup parameter by changing the device_setup
+     option in /etc/modprobe.conf 
    - turn on the device
 
 2.2.2.3 - Audiophile USB's device_setup structure
 
 If you want to understand the device_setup magic numbers for the Audiophile 
 USB, you need some very basic understanding of binary computation. However, 
-this is not required to use the parameter and you may skip thi section.
+this is not required to use the parameter and you may skip this section.
 
 The device_setup is one byte long and its structure is the following:
 
@@ -231,11 +230,11 @@ Caution:
 
 2.2.3 -  USB implementation details for this device
 
-You may safely skip this section if you're not interrested in driver 
+You may safely skip this section if you're not interested in driver 
 development.
 
-This section describes some internals aspect of the device and summarize the 
-data I got by usb-snooping the windows and linux drivers.
+This section describes some internal aspects of the device and summarize the 
+data I got by usb-snooping the windows and Linux drivers.
 
 The M-Audio Audiophile USB has 7 USB Interfaces:
 a "USB interface":
@@ -277,9 +276,9 @@ Here is a short description of the AltSettings capabilities:
   - 16-bit depth, 8-48kHz sample mode
   - Synch playback (Do), audio format type III IEC1937_AC-3
 
-In order to ensure a correct intialization of the device, the driver 
+In order to ensure a correct initialization of the device, the driver 
 _must_know_ how the device will be used:
- * if DTS is choosen, only Interface 2 with AltSet nb.6 must be
+ * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
    registered
  * if 96KHz only AltSets nb.1 of each interface must be selected
  * if samples are using 24bits/48KHz then AltSet 2 must me used if
@@ -290,7 +289,7 @@ _must_know_ how the device will be used:
    is not connected
 
 When device_setup is given as a parameter to the snd-usb-audio module, the 
-parse_audio_enpoint function uses a quirk called 
+parse_audio_endpoints function uses a quirk called 
 "audiophile_skip_setting_quirk" in order to prevent AltSettings not 
 corresponding to device_setup from being registered in the driver.
 
@@ -317,9 +316,8 @@ However you may see the following warning message:
 using the "default" ALSA device. This is less efficient than it could be. 
 Consider using a hardware device instead rather than using the plug layer."
 
-
 3.2 - Patching alsa to use direct pcm device
--------------------------------------------
+--------------------------------------------
 A patch for Jack by Andreas Steinmetz adds support for Big Endian devices. 
 However it has not been included in the CVS tree.
 
@@ -331,3 +329,32 @@ After having applied the patch you can run jackd with the following command
 line:
   % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
 
+3.2 - Getting 2 input and/or output interfaces in Jack
+------------------------------------------------------
+
+As you can see, starting the Jack server this way will only enable 1 stereo
+input (Di or Ai) and 1 stereo output (Ao or Do).
+
+This is due to the following restrictions:
+* Jack can only open one capture device and one playback device at a time
+* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
+  (and optionally hw:1,2)
+If you want to get Ai+Di and/or Ao+Do support with Jack, you would need to
+combine the Alsa devices into one logical "complex" device.
+
+If you want to give it a try, I recommend reading the information from
+this page: http://www.sound-man.co.uk/linuxaudio/ice1712multi.html
+It is related to another device (ice1712) but can be adapted to suit
+the Audiophile USB.
+
+Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
+* patching Jack with the previously mentioned "Big Endian" patch
+* patching Jackd with the MMAP_COMPLEX patch (see the ice1712 page)
+* patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
+* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
+  file 
+* start jackd with this device
+
+I had no success in testing this for now, but this may be due to my OS
+configuration. If you have any success with this kind of setup, please
+drop me an email.

trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....

trunk/arch/i386/kernel/acpi/boot.c

@@ -215,7 +215,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_madt *madt = NULL;
 
-	if (!phys_addr || !size || !cpu_has_apic)
+	if (!phys_addr || !size)
 		return -EINVAL;
 
 	madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
@@ -1102,9 +1102,6 @@ int __init acpi_boot_table_init(void)
 	dmi_check_system(acpi_dmi_table);
 #endif
 
-	if (!cpu_has_apic)
-		return -ENODEV;
-
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs

trunk/arch/i386/kernel/apic.c

@@ -757,10 +757,6 @@ static int __init apic_set_verbosity(char *str)
 		apic_verbosity = APIC_DEBUG;
 	else if (strcmp("verbose", str) == 0)
 		apic_verbosity = APIC_VERBOSE;
-	else
-		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
-				" use apic=verbose or apic=debug\n", str);
-
 	return 1;
 }
 

trunk/arch/i386/kernel/ptrace.c

@@ -671,7 +671,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 
 	if (unlikely(current->audit_context)) {
 		if (entryexit)
-			audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
+			audit_syscall_exit(AUDITSC_RESULT(regs->eax),
 						regs->eax);
 		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
 		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
@@ -720,14 +720,13 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 	ret = is_sysemu;
 out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax,
+		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax,
 				    regs->ebx, regs->ecx, regs->edx, regs->esi);
 	if (ret == 0)
 		return 0;
 
 	regs->orig_eax = -1; /* force skip of syscall restarting */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
-				regs->eax);
+		audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax);
 	return 1;
 }

trunk/arch/i386/kernel/setup.c

@@ -970,8 +970,10 @@ efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
   * not-overlapping, which is the case
   */
 int __init
-e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
+e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
 {
+	u64 start = s;
+	u64 end = e;
 	int i;
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];

trunk/arch/i386/kernel/timers/timer_tsc.c

@@ -279,7 +279,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 {
 	struct cpufreq_freqs *freq = data;
 
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_seqlock_irq(&xtime_lock);
 	if (!ref_freq) {
 		if (!freq->old){
@@ -312,7 +312,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	}
 
 end:
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_sequnlock_irq(&xtime_lock);
 
 	return 0;

trunk/arch/i386/kernel/vm86.c

@@ -312,7 +312,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 
 	/*call audit_syscall_exit since we do not exit via the normal paths */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(eax), eax);
+		audit_syscall_exit(AUDITSC_RESULT(eax), eax);
 
 	__asm__ __volatile__(
 		"movl %0,%%esp\n\t"

trunk/arch/ia64/kernel/ptrace.c

@@ -1644,7 +1644,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 			arch = AUDIT_ARCH_IA64;
 		}
 
-		audit_syscall_entry(current, arch, syscall, arg0, arg1, arg2, arg3);
+		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
 
 }
@@ -1662,7 +1662,7 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 
 		if (success != AUDITSC_SUCCESS)
 			result = -result;
-		audit_syscall_exit(current, success, result);
+		audit_syscall_exit(success, result);
 	}
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE)

trunk/arch/mips/kernel/ptrace.c

@@ -483,7 +483,7 @@ static inline int audit_arch(void)
 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
 		                   regs->regs[2]);
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -507,7 +507,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 	}
  out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, audit_arch(), regs->regs[2],
+		audit_syscall_entry(audit_arch(), regs->regs[2],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 }

trunk/arch/powerpc/kernel/ptrace.c

@@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 		do_syscall_trace();
 
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(current,
+		audit_syscall_entry(
 #ifdef CONFIG_PPC32
 				    AUDIT_ARCH_PPC,
 #else
@@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 #endif
 
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current,
-				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+		audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)