---

yaml
---
r: 158727
b: refs/heads/master
c: 2495fbf
h: refs/heads/master
i:
  158725: 0d01ef2
  158723: ac84771
  158719: 1301b2d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 55e0715f612f19b44c17497929091df2f3357e5d
+refs/heads/master: 2495fbf7effa6868f5d74124ae9b22a57980755b

trunk/.gitignore

@@ -27,7 +27,6 @@
 *.gz
 *.lzma
 *.patch
-*.gcno
 
 #
 # Top-level generic files

trunk/CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@comnets.uni-bremen.de
+E: ajk@iehk.rwth-aachen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,9 +2006,6 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
-N: Jonathan Layes
-D: ARPD support
-
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3805,9 +3802,6 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
-N: Thomas Woller
-D: CS461x Cirrus Logic sound driver
-
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

trunk/Documentation/ABI/testing/sysfs-block

@@ -94,37 +94,28 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit a physical storage device can
-		write atomically.  It is usually the same as the logical
-		block size but may be bigger.  One example is SATA
-		drives with 4KB sectors that expose a 512-byte logical
-		block size to the operating system.  For stacked block
-		devices the physical_block_size variable contains the
-		maximum physical_block_size of the component devices.
+		This is the smallest unit the storage device can write
+		without resorting to read-modify-write operation.  It is
+		usually the same as the logical block size but may be
+		bigger.  One example is SATA drives with 4KB sectors
+		that expose a 512-byte logical block size to the
+		operating system.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a granularity or preferred
-		minimum I/O size which is the smallest request the
-		device can perform without incurring a performance
-		penalty.  For disk drives this is often the physical
-		block size.  For RAID arrays it is often the stripe
-		chunk size.  A properly aligned multiple of
-		minimum_io_size is the preferred request size for
-		workloads where a high number of I/O operations is
-		desired.
+		Storage devices may report a preferred minimum I/O size,
+		which is the smallest request the device can perform
+		without incurring a read-modify-write penalty.  For disk
+		drives this is often the physical block size.  For RAID
+		arrays it is often the stripe chunk size.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit for sustained I/O.  This is
-		rarely reported for disk drives.  For RAID arrays it is
-		usually the stripe width or the internal track size.  A
-		properly aligned multiple of optimal_io_size is the
-		preferred request size for workloads where sustained
-		throughput is desired.  If no optimal I/O size is
-		reported this file contains 0.
+		the device's preferred unit of receiving I/O.  This is
+		rarely reported for disk drives.  For RAID devices it is
+		usually the stripe width or the internal block size.

trunk/Documentation/DocBook/kernel-hacking.tmpl

@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__be32 ipaddress;
-printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
+__u32 ipaddress;
+printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
    </programlisting>
 
    <para>

trunk/Documentation/DocBook/mac80211.tmpl

@@ -184,6 +184,8 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues

trunk/Documentation/RCU/RTFP.txt

@@ -743,80 +743,3 @@ Revised:
 	RCU, realtime RCU, sleepable RCU, performance.
 "
 }
-
-@article{PaulEMcKenney2008RCUOSR
-,author="Paul E. McKenney and Jonathan Walpole"
-,title="Introducing technology into the {Linux} kernel: a case study"
-,Year="2008"
-,journal="SIGOPS Oper. Syst. Rev."
-,volume="42"
-,number="5"
-,pages="4--17"
-,issn="0163-5980"
-,doi={http://doi.acm.org/10.1145/1400097.1400099}
-,publisher="ACM"
-,address="New York, NY, USA"
-,annotation={
-	Linux changed RCU to a far greater degree than RCU has changed Linux.
-}
-}
-
-@unpublished{PaulEMcKenney2008HierarchicalRCU
-,Author="Paul E. McKenney"
-,Title="Hierarchical {RCU}"
-,month="November"
-,day="3"
-,year="2008"
-,note="Available:
-\url{http://lwn.net/Articles/305782/}
-[Viewed November 6, 2008]"
-,annotation="
-	RCU with combining-tree-based grace-period detection,
-	permitting it to handle thousands of CPUs.
-"
-}
-
-@conference{PaulEMcKenney2009MaliciousURCU
-,Author="Paul E. McKenney"
-,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms"
-,Booktitle="linux.conf.au 2009"
-,month="January"
-,year="2009"
-,address="Hobart, Australia"
-,note="Available:
-\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf}
-[Viewed February 2, 2009]"
-,annotation="
-	Realtime RCU and torture-testing RCU uses.
-"
-}
-
-@unpublished{MathieuDesnoyers2009URCU
-,Author="Mathieu Desnoyers"
-,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}"
-,month="February"
-,day="5"
-,year="2009"
-,note="Available:
-\url{http://lkml.org/lkml/2009/2/5/572}
-\url{git://lttng.org/userspace-rcu.git}
-[Viewed February 20, 2009]"
-,annotation="
-	Mathieu Desnoyers's user-space RCU implementation.
-	git://lttng.org/userspace-rcu.git
-"
-}
-
-@unpublished{PaulEMcKenney2009BloatWatchRCU
-,Author="Paul E. McKenney"
-,Title="{RCU}: The {Bloatwatch} Edition"
-,month="March"
-,day="17"
-,year="2009"
-,note="Available:
-\url{http://lwn.net/Articles/323929/}
-[Viewed March 20, 2009]"
-,annotation="
-	Uniprocessor assumptions allow simplified RCU implementation.
-"
-}

trunk/Documentation/RCU/UP.txt

@@ -2,13 +2,14 @@ RCU on Uniprocessor Systems
 
 
 A common misconception is that, on UP systems, the call_rcu() primitive
-may immediately invoke its function.  The basis of this misconception
+may immediately invoke its function, and that the synchronize_rcu()
+primitive may return immediately.  The basis of this misconception
 is that since there is only one CPU, it should not be necessary to
 wait for anything else to get done, since there are no other CPUs for
 anything else to be happening on.  Although this approach will -sort- -of-
 work a surprising amount of the time, it is a very bad idea in general.
-This document presents three examples that demonstrate exactly how bad
-an idea this is.
+This document presents three examples that demonstrate exactly how bad an
+idea this is.
 
 
 Example 1: softirq Suicide
@@ -81,18 +82,11 @@ Quick Quiz #2: What locking restriction must RCU callbacks respect?
 
 Summary
 
-Permitting call_rcu() to immediately invoke its arguments breaks RCU,
-even on a UP system.  So do not do it!  Even on a UP system, the RCU
-infrastructure -must- respect grace periods, and -must- invoke callbacks
-from a known environment in which no locks are held.
-
-It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
-immediately on an UP system.  It is also safe for synchronize_rcu()
-to return immediately on UP systems, except when running preemptable
-RCU.
-
-Quick Quiz #3: Why can't synchronize_rcu() return immediately on
-	UP systems running preemptable RCU?
+Permitting call_rcu() to immediately invoke its arguments or permitting
+synchronize_rcu() to immediately return breaks RCU, even on a UP system.
+So do not do it!  Even on a UP system, the RCU infrastructure -must-
+respect grace periods, and -must- invoke callbacks from a known environment
+in which no locks are held.
 
 
 Answer to Quick Quiz #1:
@@ -123,13 +117,3 @@ Answer to Quick Quiz #2:
 	callbacks acquire locks directly.  However, a great many RCU
 	callbacks do acquire locks -indirectly-, for example, via
 	the kfree() primitive.
-
-Answer to Quick Quiz #3:
-	Why can't synchronize_rcu() return immediately on UP systems
-	running preemptable RCU?
-
-	Because some other task might have been preempted in the middle
-	of an RCU read-side critical section.  If synchronize_rcu()
-	simply immediately returned, it would prematurely signal the
-	end of the grace period, which would come as a nasty shock to
-	that other thread when it started running again.

trunk/Documentation/RCU/checklist.txt

@@ -11,10 +11,7 @@ over a rather long period of time, but improvements are always welcome!
 	structure is updated more than about 10% of the time, then
 	you should strongly consider some other approach, unless
 	detailed performance measurements show that RCU is nonetheless
-	the right tool for the job.  Yes, you might think of RCU
-	as simply cutting overhead off of the readers and imposing it
-	on the writers.  That is exactly why normal uses of RCU will
-	do much more reading than updating.
+	the right tool for the job.
 
 	Another exception is where performance is not an issue, and RCU
 	provides a simpler implementation.  An example of this situation
@@ -243,11 +240,10 @@ over a rather long period of time, but improvements are always welcome!
 	instead need to use synchronize_irq() or synchronize_sched().
 
 12.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with softirq disabled, e.g., via spin_lock_irqsave(),
-	spin_lock_bh(), etc.  Failing to disable irq on a given
-	acquisition of that lock will result in deadlock as soon as the
-	RCU callback happens to interrupt that acquisition's critical
-	section.
+	with irq disabled, e.g., via spin_lock_irqsave().  Failing to
+	disable irq on a given acquisition of that lock will result in
+	deadlock as soon as the RCU callback happens to interrupt that
+	acquisition's critical section.
 
 13.	RCU callbacks can be and are executed in parallel.  In many cases,
 	the callback code simply wrappers around kfree(), so that this
@@ -314,9 +310,3 @@ over a rather long period of time, but improvements are always welcome!
 	Because these primitives only wait for pre-existing readers,
 	it is the caller's responsibility to guarantee safety to
 	any subsequent readers.
-
-16.	The various RCU read-side primitives do -not- contain memory
-	barriers.  The CPU (and in some cases, the compiler) is free
-	to reorder code into and out of RCU read-side critical sections.
-	It is the responsibility of the RCU update-side primitives to
-	deal with this.

trunk/Documentation/RCU/rcu.txt

@@ -36,7 +36,7 @@ o	How can the updater tell when a grace period has completed
 	executed in user mode, or executed in the idle loop, we can
 	safely free up that item.
 
-	Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
+	Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
 	same effect, but require that the readers manipulate CPU-local
 	counters.  These counters allow limited types of blocking
 	within RCU read-side critical sections.  SRCU also uses
@@ -79,10 +79,10 @@ o	I hear that RCU is patented?  What is with that?
 o	I hear that RCU needs work in order to support realtime kernels?
 
 	This work is largely completed.  Realtime-friendly RCU can be
-	enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
-	parameter.  However, work is in progress for enabling priority
-	boosting of preempted RCU read-side critical sections.	This is
-	needed if you have CPU-bound realtime threads.
+	enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
+	However, work is in progress for enabling priority boosting of
+	preempted RCU read-side critical sections.  This is needed if you
+	have CPU-bound realtime threads.
 
 o	Where can I find more information on RCU?
 

trunk/Documentation/RCU/rcubarrier.txt

@@ -170,13 +170,6 @@ module invokes call_rcu() from timers, you will need to first cancel all
 the timers, and only then invoke rcu_barrier() to wait for any remaining
 RCU callbacks to complete.
 
-Of course, if you module uses call_rcu_bh(), you will need to invoke
-rcu_barrier_bh() before unloading.  Similarly, if your module uses
-call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
-unloading.  If your module uses call_rcu(), call_rcu_bh(), -and-
-call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
-rcu_barrier_bh(), and rcu_barrier_sched().
-
 
 Implementing rcu_barrier()
 

trunk/Documentation/RCU/rculist_nulls.txt

@@ -83,12 +83,11 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
- * or obj->refcnt
  */
 smp_wmb();
-atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -160,10 +159,6 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-/*
- * changes to obj->key must be visible before refcnt one
- */
-smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)

trunk/Documentation/RCU/torture.txt

@@ -76,10 +76,8 @@ torture_type	The type of RCU to test: "rcu" for the rcu_read_lock() API,
 		"rcu_sync" for rcu_read_lock() with synchronous reclamation,
 		"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
 		rcu_read_lock_bh() with synchronous reclamation, "srcu" for
-		the "srcu_read_lock()" API, "sched" for the use of
-		preempt_disable() together with synchronize_sched(),
-		and "sched_expedited" for the use of preempt_disable()
-		with synchronize_sched_expedited().
+		the "srcu_read_lock()" API, and "sched" for the use of
+		preempt_disable() together with synchronize_sched().
 
 verbose		Enable debug printk()s.  Default is disabled.
 
@@ -164,23 +162,6 @@ of the "old" and "current" counters for the corresponding CPU.  The
 "idx" value maps the "old" and "current" values to the underlying array,
 and is useful for debugging.
 
-Similarly, sched_expedited RCU provides the following:
-
-	sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
-	sched_expedited-torture: Reader Pipe:  12660320201 95875 0 0 0 0 0 0 0 0 0
-	sched_expedited-torture: Reader Batch:  12660424885 0 0 0 0 0 0 0 0 0 0
-	sched_expedited-torture: Free-Block Circulation:  1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
-	state: -1 / 0:0 3:0 4:0
-
-As before, the first four lines are similar to those for RCU.
-The last line shows the task-migration state.  The first number is
--1 if synchronize_sched_expedited() is idle, -2 if in the process of
-posting wakeups to the migration kthreads, and N when waiting on CPU N.
-Each of the colon-separated fields following the "/" is a CPU:state pair.
-Valid states are "0" for idle, "1" for waiting for quiescent state,
-"2" for passed through quiescent state, and "3" when a race with a
-CPU-hotplug event forces use of the synchronize_sched() primitive.
-
 
 USAGE