---

yaml
---
r: 364844
b: refs/heads/master
c: 25e11ec
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f
+refs/heads/master: 25e11ec4fe5271c4895265ecbb69531e6b0c0dd5

trunk/drivers/usb/Kconfig

@@ -122,9 +122,9 @@ config USB
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbcore.
 
-source "drivers/usb/core/Kconfig"
+if USB
 
-source "drivers/usb/dwc3/Kconfig"
+source "drivers/usb/core/Kconfig"
 
 source "drivers/usb/mon/Kconfig"
 
@@ -134,8 +134,6 @@ source "drivers/usb/host/Kconfig"
 
 source "drivers/usb/musb/Kconfig"
 
-source "drivers/usb/chipidea/Kconfig"
-
 source "drivers/usb/renesas_usbhs/Kconfig"
 
 source "drivers/usb/class/Kconfig"
@@ -144,12 +142,19 @@ source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
+endif
+
+source "drivers/usb/dwc3/Kconfig"
+
+source "drivers/usb/chipidea/Kconfig"
+
 comment "USB port drivers"
-	depends on USB
+
+if USB
 
 config USB_USS720
 	tristate "USS720 parport driver"
-	depends on USB && PARPORT
+	depends on PARPORT
 	select PARPORT_NOT_PC
 	---help---
 	  This driver is for USB parallel port adapters that use the Lucent
@@ -180,10 +185,12 @@ source "drivers/usb/serial/Kconfig"
 
 source "drivers/usb/misc/Kconfig"
 
-source "drivers/usb/phy/Kconfig"
-
 source "drivers/usb/atm/Kconfig"
 
+endif # USB
+
+source "drivers/usb/phy/Kconfig"
+
 source "drivers/usb/gadget/Kconfig"
 
 endif # USB_SUPPORT

trunk/drivers/usb/atm/Kconfig

@@ -4,7 +4,7 @@
 
 menuconfig USB_ATM
 	tristate "USB DSL modem support"
-	depends on USB && ATM
+	depends on ATM
 	select CRC32
 	default n
 	help

trunk/drivers/usb/class/Kconfig

@@ -2,11 +2,10 @@
 # USB Class driver configuration
 #
 comment "USB Device Class drivers"
-	depends on USB
 
 config USB_ACM
 	tristate "USB Modem (CDC ACM) support"
-	depends on USB && TTY
+	depends on TTY
 	---help---
 	  This driver supports USB modems and ISDN adapters which support the
 	  Communication Device Class Abstract Control Model interface.
@@ -21,7 +20,6 @@ config USB_ACM
 
 config USB_PRINTER
 	tristate "USB Printer support"
-	depends on USB
 	help
 	  Say Y here if you want to connect a USB printer to your computer's
 	  USB port.
@@ -31,7 +29,6 @@ config USB_PRINTER
 
 config USB_WDM
 	tristate "USB Wireless Device Management support"
-	depends on USB
 	---help---
 	  This driver supports the WMC Device Management functionality
 	  of cell phones compliant to the CDC WMC specification. You can use
@@ -42,7 +39,6 @@ config USB_WDM
 
 config USB_TMC
 	tristate "USB Test and Measurement Class support"
-	depends on USB
 	help
 	  Say Y here if you want to connect a USB device that follows
 	  the USB.org specification for USB Test and Measurement devices

trunk/drivers/usb/core/Kconfig

@@ -3,15 +3,13 @@
 #
 config USB_DEBUG
 	bool "USB verbose debug messages"
-	depends on USB
 	help
 	  Say Y here if you want the USB core & hub drivers to produce a bunch
 	  of debug messages to the system log. Select this if you are having a
 	  problem with USB support and want to see more of what is going on.
 
 config USB_ANNOUNCE_NEW_DEVICES
 	bool "USB announce new devices"
-	depends on USB
 	default N
 	help
 	  Say Y here if you want the USB core to always announce the
@@ -25,11 +23,9 @@ config USB_ANNOUNCE_NEW_DEVICES
 	  log, or have any doubts about this, say N here.
 
 comment "Miscellaneous USB options"
-	depends on USB
 
 config USB_DEFAULT_PERSIST
 	bool "Enable USB persist by default"
-	depends on USB
 	default y
 	help
 	  Say N here if you don't want USB power session persistance
@@ -45,7 +41,6 @@ config USB_DEFAULT_PERSIST
 
 config USB_DYNAMIC_MINORS
 	bool "Dynamic USB minor allocation"
-	depends on USB
 	help
 	  If you say Y here, the USB subsystem will use dynamic minor
 	  allocation for any device that uses the USB major number.
@@ -56,7 +51,6 @@ config USB_DYNAMIC_MINORS
 
 config USB_OTG
 	bool "OTG support"
-	depends on USB
 	depends on USB_SUSPEND
 	default n
 	help

trunk/drivers/usb/host/Kconfig

@@ -2,11 +2,9 @@
 # USB Host Controller Drivers
 #
 comment "USB Host Controller Drivers"
-	depends on USB
 
 config USB_C67X00_HCD
 	tristate "Cypress C67x00 HCD support"
-	depends on USB
 	help
 	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
 	  host/peripheral/OTG USB controllers.
@@ -19,7 +17,7 @@ config USB_C67X00_HCD
 
 config USB_XHCI_HCD
 	tristate "xHCI HCD (USB 3.0) support"
-	depends on USB && USB_ARCH_HAS_XHCI
+	depends on USB_ARCH_HAS_XHCI
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
@@ -43,7 +41,7 @@ config USB_XHCI_HCD_DEBUGGING
 
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
-	depends on USB && USB_ARCH_HAS_EHCI
+	depends on USB_ARCH_HAS_EHCI
 	---help---
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -280,7 +278,7 @@ config USB_EHCI_ATH79
 
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
-	depends on USB && GENERIC_HARDIRQS
+	depends on GENERIC_HARDIRQS
 	---help---
 	  The OXU210HP is an USB host/OTG/device controller. Enable this
 	  option if your board has this chip. If unsure, say N.
@@ -293,7 +291,6 @@ config USB_OXU210HP_HCD
 
 config USB_ISP116X_HCD
 	tristate "ISP116X HCD support"
-	depends on USB
 	---help---
 	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
 	  option if your board has this chip. If unsure, say N.
@@ -305,7 +302,6 @@ config USB_ISP116X_HCD
 
 config USB_ISP1760_HCD
 	tristate "ISP 1760 HCD support"
-	depends on USB
 	---help---
 	  The ISP1760 chip is a USB 2.0 host controller.
 
@@ -320,7 +316,6 @@ config USB_ISP1760_HCD
 
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
-	depends on USB
 	default N
 	---help---
 	  Supports the Philips ISP1362 chip as a host controller
@@ -332,7 +327,7 @@ config USB_ISP1362_HCD
 
 config USB_OHCI_HCD
 	tristate "OHCI HCD support"
-	depends on USB && USB_ARCH_HAS_OHCI
+	depends on USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	depends on USB_ISP1301 || !ARCH_LPC32XX
 	---help---
@@ -490,7 +485,7 @@ config USB_OHCI_LITTLE_ENDIAN
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
+	depends on PCI || SPARC_LEON || ARCH_VT8500
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -530,7 +525,7 @@ config USB_UHCI_BIG_ENDIAN_DESC
 
 config USB_FHCI_HCD
 	tristate "Freescale QE USB Host Controller support"
-	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
 	select FSL_GTM
 	select QE_USB
 	help
@@ -547,7 +542,7 @@ config FHCI_DEBUG
 
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
-	depends on USB && USB_FTDI_ELAN
+	depends on USB_FTDI_ELAN
 	default M
 	help
 	  The U132 adapter is a USB to CardBus adapter specifically designed
@@ -575,7 +570,6 @@ config USB_U132_HCD
 
 config USB_SL811_HCD
 	tristate "SL811HS HCD support"
-	depends on USB
 	help
 	  The SL811HS is a single-port USB controller that supports either
 	  host side or peripheral side roles.  Enable this option if your
@@ -607,7 +601,6 @@ config USB_SL811_CS
 
 config USB_R8A66597_HCD
 	tristate "R8A66597 HCD support"
-	depends on USB
 	help
 	  The R8A66597 is a USB 2.0 host and peripheral controller.
 
@@ -619,7 +612,6 @@ config USB_R8A66597_HCD
 
 config USB_RENESAS_USBHS_HCD
 	tristate "Renesas USBHS HCD support"
-	depends on USB
 	depends on USB_RENESAS_USBHS
 	help
 	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
@@ -644,7 +636,7 @@ config USB_WHCI_HCD
 
 config USB_HWA_HCD
 	tristate "Host Wire Adapter (HWA) driver"
-	depends on USB && UWB
+	depends on UWB
 	select USB_WUSB
 	select UWB_HWA
 	help
@@ -658,7 +650,7 @@ config USB_HWA_HCD
 
 config USB_IMX21_HCD
        tristate "i.MX21 HCD support"
-       depends on USB && ARM && ARCH_MXC
+       depends on ARM && ARCH_MXC
        help
          This driver enables support for the on-chip USB host in the
          i.MX21 processor.
@@ -668,7 +660,7 @@ config USB_IMX21_HCD
 
 config USB_OCTEON_EHCI
 	bool "Octeon on-chip EHCI support"
-	depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
+	depends on USB_EHCI_HCD && CPU_CAVIUM_OCTEON
 	default n
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
@@ -679,7 +671,7 @@ config USB_OCTEON_EHCI
 
 config USB_OCTEON_OHCI
 	bool "Octeon on-chip OHCI support"
-	depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
+	depends on USB_OHCI_HCD && CPU_CAVIUM_OCTEON
 	default USB_OCTEON_EHCI
 	select USB_OHCI_BIG_ENDIAN_MMIO
 	select USB_OHCI_LITTLE_ENDIAN

trunk/drivers/usb/image/Kconfig

@@ -2,11 +2,9 @@
 # USB Imaging devices configuration
 #
 comment "USB Imaging devices"
-	depends on USB
 
 config USB_MDC800
 	tristate "USB Mustek MDC800 Digital Camera support"
-	depends on USB
 	---help---
 	  Say Y here if you want to connect this type of still camera to
 	  your computer's USB port. This driver can be used with gphoto 0.4.3
@@ -19,7 +17,7 @@ config USB_MDC800
 
 config USB_MICROTEK
 	tristate "Microtek X6USB scanner support"
-	depends on USB && SCSI
+	depends on SCSI
 	help
 	  Say Y here if you want support for the Microtek X6USB and
 	  possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.