---

yaml
---
r: 132919
b: refs/heads/master
c: 603b6fd
h: refs/heads/master
i:
  132917: d172e10
  132915: eead4ac
  132911: 3e6462d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 65ec1cd1e2c6228752d2f167b01e6d291014d249
+refs/heads/master: 603b6fd5b8d313a109d3739d8706ee51962ff402

trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -492,9 +492,9 @@
           }
 
           /* (2) */
-          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
-          if (err < 0)
-                  return err;
+          card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+          if (card == NULL)
+                  return -ENOMEM;
 
           /* (3) */
           err = snd_mychip_create(card, pci, &chip);
@@ -590,9 +590,8 @@
             <programlisting>
 <![CDATA[
   struct snd_card *card;
-  int err;
   ....
-  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+  card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
 ]]>
             </programlisting>
           </informalexample>
@@ -810,28 +809,26 @@
 
       <para>
         As mentioned above, to create a card instance, call
-      <function>snd_card_create()</function>.
+      <function>snd_card_new()</function>.
 
         <informalexample>
           <programlisting>
 <![CDATA[
   struct snd_card *card;
-  int err;
-  err = snd_card_create(index, id, module, extra_size, &card);
+  card = snd_card_new(index, id, module, extra_size);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The function takes five arguments, the card-index number, the
+        The function takes four arguments, the card-index number, the
         id string, the module pointer (usually
         <constant>THIS_MODULE</constant>),
-        the size of extra-data space, and the pointer to return the
-        card instance.  The extra_size argument is used to
+        and the size of extra-data space.  The last argument is used to
         allocate card-&gt;private_data for the
         chip-specific data.  Note that these data
-        are allocated by <function>snd_card_create()</function>.
+        are allocated by <function>snd_card_new()</function>.
       </para>
     </section>
 
@@ -918,16 +915,15 @@
       </para>
 
       <section id="card-management-chip-specific-snd-card-new">
-        <title>1. Allocating via <function>snd_card_create()</function>.</title>
+        <title>1. Allocating via <function>snd_card_new()</function>.</title>
         <para>
           As mentioned above, you can pass the extra-data-length
-	  to the 4th argument of <function>snd_card_create()</function>, i.e.
+	  to the 4th argument of <function>snd_card_new()</function>, i.e.
 
           <informalexample>
             <programlisting>
 <![CDATA[
-  err = snd_card_create(index[dev], id[dev], THIS_MODULE,
-                        sizeof(struct mychip), &card);
+  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
 ]]>
             </programlisting>
           </informalexample>
@@ -956,16 +952,16 @@
 
         <para>
           After allocating a card instance via
-          <function>snd_card_create()</function> (with
-          <constant>0</constant> on the 4th arg), call
+          <function>snd_card_new()</function> (with
+          <constant>NULL</constant> on the 4th arg), call
           <function>kzalloc()</function>. 
 
           <informalexample>
             <programlisting>
 <![CDATA[
   struct snd_card *card;
   struct mychip *chip;
-  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+  card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 ]]>
@@ -5754,9 +5750,8 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
-          int err;
           ....
-          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
           ....
           chip = kzalloc(sizeof(*chip), GFP_KERNEL);
           ....
@@ -5768,7 +5763,7 @@ struct _snd_pcm_runtime {
       </informalexample>
 
 	When you created the chip data with
-	<function>snd_card_create()</function>, it's anyway accessible
+	<function>snd_card_new()</function>, it's anyway accessible
 	via <structfield>private_data</structfield> field.
 
       <informalexample>
@@ -5780,10 +5775,9 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
-          int err;
           ....
-          err = snd_card_create(index[dev], id[dev], THIS_MODULE,
-                                sizeof(struct mychip), &card);
+          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+                              sizeof(struct mychip));
           ....
           chip = card->private_data;
           ....

trunk/Documentation/sound/alsa/soc/dapm.txt

@@ -116,9 +116,6 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
-If you dont want the mixer elements prefixed with the name of the mixer widget,
-you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
-as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------

trunk/arch/arm/mach-pxa/e740.c

@@ -135,11 +135,6 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

trunk/arch/arm/mach-pxa/e750.c

@@ -133,11 +133,6 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

trunk/arch/arm/mach-pxa/h5000.c

@@ -153,13 +153,6 @@ static unsigned long h5000_pin_config[] __initdata = {
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
 };
 
 /*

trunk/arch/arm/mach-pxa/include/mach/eseries-gpio.h

@@ -45,21 +45,6 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19

trunk/arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -47,7 +47,7 @@
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
+#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
@@ -106,11 +106,6 @@
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
-#if defined(CONFIG_PXA3xx)
-#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
-#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
-#endif
-
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */

trunk/arch/arm/mach-pxa/spitz.c

@@ -105,12 +105,6 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO57_nIOIS16,
 	GPIO104_PSKTSEL,
 
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,

trunk/arch/arm/mach-s3c2410/include/mach/io.h

@@ -9,7 +9,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/map.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 

trunk/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h

@@ -33,9 +33,6 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
-#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
-#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
-
 #define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
 #define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
 #define S3C2412_IISMOD_SLAVE		(2 << 10)
@@ -47,8 +44,8 @@
 #define S3C2412_IISMOD_LR_LLOW		(0 << 7)
 #define S3C2412_IISMOD_LR_RLOW		(1 << 7)
 #define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
 #define S3C2412_IISMOD_SDF_MASK		(3 << 5)
 #define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
 #define S3C2412_IISMOD_RCLK_512FS	(1 << 3)

trunk/arch/arm/plat-s3c24xx/clock-dclk.c

@@ -18,7 +18,6 @@
 
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/hardware.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

trunk/arch/m68k/amiga/amiints.c

@@ -72,14 +72,10 @@ static struct irq_controller amiga_irq_controller = {
 
 void __init amiga_init_IRQ(void)
 {
-	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
-		pr_err("Couldn't register int%d\n", 1);
-	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
-		pr_err("Couldn't register int%d\n", 3);
-	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
-		pr_err("Couldn't register int%d\n", 4);
-	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
-		pr_err("Couldn't register int%d\n", 5);
+	request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL);
+	request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL);
+	request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL);
+	request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL);
 
 	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
 

trunk/arch/m68k/amiga/cia.c

@@ -176,7 +176,5 @@ void __init cia_init_IRQ(struct ciabase *base)
 	/* override auto int and install CIA handler */
 	m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
 	m68k_irq_startup(base->handler_irq);
-	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
-			base->name, base))
-		pr_err("Couldn't register %s interrupt\n", base->name);
+	request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base);
 }

trunk/arch/m68k/amiga/config.c

@@ -493,8 +493,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 	 * Please don't change this to use ciaa, as it interferes with the
 	 * SCSI code. We'll have to take a look at this later
 	 */
-	if (request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL))
-		pr_err("Couldn't register timer interrupt\n");
+	request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
 	/* start timer */
 	ciab.cra |= 0x11;
 }

trunk/arch/m68k/apollo/config.c

@@ -31,6 +31,10 @@ extern unsigned long dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern int dn_dummy_set_clock_mmss(unsigned long);
 extern void dn_dummy_reset(void);
+extern void dn_dummy_waitbut(void);
+extern struct fb_info *dn_fb_init(long *);
+extern void dn_dummy_debug_init(void);
+extern irqreturn_t dn_process_int(int irq, struct pt_regs *fp);
 #ifdef CONFIG_HEARTBEAT
 static void dn_heartbeat(int on);
 #endif
@@ -200,8 +204,7 @@ void dn_sched_init(irq_handler_t timer_routine)
 	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
 #endif
 
-	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
-		pr_err("Couldn't register timer interrupt\n");
+	request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine);
 }
 
 unsigned long dn_gettimeoffset(void) {

trunk/arch/m68k/atari/atakeyb.c

@@ -33,6 +33,7 @@
 #include <asm/atari_joystick.h>
 #include <asm/irq.h>
 
+extern unsigned int keymap_count;
 
 /* Hook for MIDI serial driver */
 void (*atari_MIDI_interrupt_hook) (void);
@@ -566,19 +567,14 @@ static int atari_keyb_done = 0;
 
 int atari_keyb_init(void)
 {
-	int error;
-
 	if (atari_keyb_done)
 		return 0;
 
 	kb_state.state = KEYBOARD;
 	kb_state.len = 0;
 
-	error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
-			    IRQ_TYPE_SLOW, "keyboard/mouse/MIDI",
-			    atari_keyboard_interrupt);
-	if (error)
-		return error;
+	request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt, IRQ_TYPE_SLOW,
+		    "keyboard/mouse/MIDI", atari_keyboard_interrupt);
 
 	atari_turnoff_irq(IRQ_MFP_ACIA);
 	do {

trunk/arch/m68k/atari/stdma.c

@@ -179,9 +179,8 @@ EXPORT_SYMBOL(stdma_islocked);
 void __init stdma_init(void)
 {
 	stdma_isr = NULL;
-	if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
-			"ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int))
-		pr_err("Couldn't register ST-DMA interrupt\n");
+	request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
+	            "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int);
 }
 
 

trunk/arch/m68k/atari/time.c

@@ -31,9 +31,8 @@ atari_sched_init(irq_handler_t timer_routine)
     /* start timer C, div = 1:100 */
     mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
     /* install interrupt service routine for MFP Timer C */
-    if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
-		    "timer", timer_routine))
-	pr_err("Couldn't register timer interrupt\n");
+    request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
+                "timer", timer_routine);
 }
 
 /* ++andreas: gettimeoffset fixed to check for pending interrupt */

trunk/arch/m68k/bvme6000/config.c

@@ -43,6 +43,7 @@ extern unsigned long bvme6000_gettimeoffset (void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
 extern int bvme6000_set_clock_mmss (unsigned long);
 extern void bvme6000_reset (void);
+extern void bvme6000_waitbut(void);
 void bvme6000_set_vectors (void);
 
 /* Save tick handler routine pointer, will point to do_timer() in