Staging: comedi: ni_atmio16d: printk fixups

Fix improper use of printks in this driver.  Most are
debug messages under a DEBUG #ifdef, a few are info/warnings
that should get logged for driver error conditions.

Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/ni_atmio16d.c

@@ -279,7 +279,9 @@ static irqreturn_t atmio16d_interrupt(int irq, void *d)
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 0;
 
-/* printk("atmio16d_interrupt!\n"); */
+#ifdef DEBUG1
+	printk(KERN_DEBUG "atmio16d_interrupt!\n");
+#endif
 
 	comedi_buf_put(s->async, inw(dev->iobase + AD_FIFO_REG));
 
@@ -293,7 +295,7 @@ static int atmio16d_ai_cmdtest(struct comedi_device *dev,
 {
 	int err = 0, tmp;
 #ifdef DEBUG1
-	printk("atmio16d_ai_cmdtest\n");
+	printk(KERN_DEBUG "atmio16d_ai_cmdtest\n");
 #endif
 	/* make sure triggers are valid */
 	tmp = cmd->start_src;
@@ -397,7 +399,7 @@ static int atmio16d_ai_cmd(struct comedi_device *dev,
 	unsigned int sample_count, tmp, chan, gain;
 	int i;
 #ifdef DEBUG1
-	printk("atmio16d_ai_cmd\n");
+	printk(KERN_DEBUG "atmio16d_ai_cmd\n");
 #endif
 	/* This is slowly becoming a working command interface. *
 	 * It is still uber-experimental */
@@ -559,7 +561,7 @@ static int atmio16d_ai_insn_read(struct comedi_device *dev,
 	int status;
 
 #ifdef DEBUG1
-	printk("atmio16d_ai_insn_read\n");
+	printk(KERN_DEBUG "atmio16d_ai_insn_read\n");
 #endif
 	chan = CR_CHAN(insn->chanspec);
 	gain = CR_RANGE(insn->chanspec);
@@ -580,7 +582,7 @@ static int atmio16d_ai_insn_read(struct comedi_device *dev,
 			/* check conversion status */
 			status = inw(dev->iobase + STAT_REG);
 #ifdef DEBUG1
-			printk("status=%x\n", status);
+			printk(KERN_DEBUG "status=%x\n", status);
 #endif
 			if (status & STAT_AD_CONVAVAIL) {
 				/* read the data now */
@@ -591,15 +593,15 @@ static int atmio16d_ai_insn_read(struct comedi_device *dev,
 				break;
 			}
 			if (status & STAT_AD_OVERFLOW) {
-				printk("atmio16d: a/d FIFO overflow\n");
+				printk(KERN_INFO "atmio16d: a/d FIFO overflow\n");
 				outw(0, dev->iobase + AD_CLEAR_REG);
 
 				return -ETIME;
 			}
 		}
 		/* end waiting, now check if it timed out */
 		if (t == ATMIO16D_TIMEOUT) {
-			printk("atmio16d: timeout\n");
+			printk(KERN_INFO "atmio16d: timeout\n");
 
 			return -ETIME;
 		}
@@ -614,7 +616,7 @@ static int atmio16d_ao_insn_read(struct comedi_device *dev,
 {
 	int i;
 #ifdef DEBUG1
-	printk("atmio16d_ao_insn_read\n");
+	printk(KERN_DEBUG "atmio16d_ao_insn_read\n");
 #endif
 
 	for (i = 0; i < insn->n; i++)
@@ -630,7 +632,7 @@ static int atmio16d_ao_insn_write(struct comedi_device *dev,
 	int chan;
 	int d;
 #ifdef DEBUG1
-	printk("atmio16d_ao_insn_write\n");
+	printk(KERN_DEBUG "atmio16d_ao_insn_write\n");
 #endif
 
 	chan = CR_CHAN(insn->chanspec);
@@ -740,7 +742,7 @@ static int atmio16d_attach(struct comedi_device *dev,
 
 	/* make sure the address range is free and allocate it */
 	iobase = it->options[0];
-	printk("comedi%d: atmio16d: 0x%04lx ", dev->minor, iobase);
+	printk(KERN_INFO "comedi%d: atmio16d: 0x%04lx ", dev->minor, iobase);
 	if (!request_region(iobase, ATMIO16D_SIZE, "ni_atmio16d")) {
 		printk("I/O port conflict\n");
 		return -EIO;
@@ -767,13 +769,13 @@ static int atmio16d_attach(struct comedi_device *dev,
 
 		ret = request_irq(irq, atmio16d_interrupt, 0, "atmio16d", dev);
 		if (ret < 0) {
-			printk("failed to allocate irq %u\n", irq);
+			printk(KERN_INFO "failed to allocate irq %u\n", irq);
 			return ret;
 		}
 		dev->irq = irq;
-		printk("( irq = %u )\n", irq);
+		printk(KERN_INFO "( irq = %u )\n", irq);
 	} else {
-		printk("( no irq )");
+		printk(KERN_INFO "( no irq )");
 	}
 
 	/* set device options */
@@ -870,7 +872,7 @@ static int atmio16d_attach(struct comedi_device *dev,
 
 static int atmio16d_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: atmio16d: remove\n", dev->minor);
+	printk(KERN_INFO "comedi%d: atmio16d: remove\n", dev->minor);
 
 	if (dev->subdevices && boardtype->has_8255)
 		subdev_8255_cleanup(dev, dev->subdevices + 3);