---

yaml
---
r: 68963
b: refs/heads/master
c: 720349a
h: refs/heads/master
i:
  68961: dcfc6ed
  68959: 11b8e33
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d361db483241489fc4b37cd168c2ce7940a7845b
+refs/heads/master: 720349a879d3e37f3d932bf3ca9b94ac638d59b6

trunk/drivers/scsi/advansys.c

@@ -459,14 +459,22 @@ typedef struct asc_risc_sg_list_q {
 #define ASC_WARN_CFG_MSW_RECOVER      0x0040
 
 /*
- * Error code values are set in ASC_DVC_VAR  'err_code'.
- */
-#define ASC_IERR_MCODE_CHKSUM         0x0002
-#define ASC_IERR_SET_PC_ADDR          0x0004
-#define ASC_IERR_START_STOP_CHIP      0x0008
-#define ASC_IERR_SET_SCSI_ID          0x0080
-#define ASC_IERR_BAD_SIGNATURE        0x0200
-#define ASC_IERR_NO_BUS_TYPE          0x0400
+ * Error code values are set in {ASC/ADV}_DVC_VAR  'err_code'.
+ */
+#define ASC_IERR_NO_CARRIER		0x0001	/* No more carrier memory */
+#define ASC_IERR_MCODE_CHKSUM		0x0002	/* micro code check sum error */
+#define ASC_IERR_SET_PC_ADDR		0x0004
+#define ASC_IERR_START_STOP_CHIP	0x0008	/* start/stop chip failed */
+#define ASC_IERR_ILLEGAL_CONNECTION	0x0010	/* Illegal cable connection */
+#define ASC_IERR_SINGLE_END_DEVICE	0x0020	/* SE device on DIFF bus */
+#define ASC_IERR_REVERSED_CABLE		0x0040	/* Narrow flat cable reversed */
+#define ASC_IERR_SET_SCSI_ID		0x0080	/* set SCSI ID failed */
+#define ASC_IERR_HVD_DEVICE		0x0100	/* HVD device on LVD port */
+#define ASC_IERR_BAD_SIGNATURE		0x0200	/* signature not found */
+#define ASC_IERR_NO_BUS_TYPE		0x0400
+#define ASC_IERR_BIST_PRE_TEST		0x0800	/* BIST pre-test error */
+#define ASC_IERR_BIST_RAM_TEST		0x1000	/* BIST RAM test error */
+#define ASC_IERR_BAD_CHIPTYPE		0x2000	/* Invalid chip_type setting */
 
 #define ASC_DEF_MAX_TOTAL_QNG   (0xF0)
 #define ASC_MIN_TAG_Q_PER_DVC   (0x04)
@@ -1697,22 +1705,6 @@ typedef struct adveep_38C1600_config {
 #define ADV_MAX_TID                     15	/* max. target identifier */
 #define ADV_MAX_LUN                     7	/* max. logical unit number */
 
-/*
- * Error code values are set in ADV_DVC_VAR 'err_code'.
- */
-#define ASC_IERR_MCODE_CHKSUM       0x0002	/* micro code check sum error */
-#define ASC_IERR_NO_CARRIER         0x0004	/* No more carrier memory. */
-#define ASC_IERR_START_STOP_CHIP    0x0008	/* start/stop chip failed */
-#define ASC_IERR_SET_SCSI_ID        0x0080	/* set SCSI ID failed */
-#define ASC_IERR_HVD_DEVICE         0x0100	/* HVD attached to LVD connector. */
-#define ASC_IERR_BAD_SIGNATURE      0x0200	/* signature not found */
-#define ASC_IERR_ILLEGAL_CONNECTION 0x0400	/* Illegal cable connection */
-#define ASC_IERR_SINGLE_END_DEVICE  0x0800	/* Single-end used w/differential */
-#define ASC_IERR_REVERSED_CABLE     0x1000	/* Narrow flat cable reversed */
-#define ASC_IERR_BIST_PRE_TEST      0x2000	/* BIST pre-test error */
-#define ASC_IERR_BIST_RAM_TEST      0x4000	/* BIST RAM test error */
-#define ASC_IERR_BAD_CHIPTYPE       0x8000	/* Invalid 'chip_type' setting. */
-
 /*
  * Fixed locations of microcode operating variables.
  */