---

yaml
---
r: 170265
b: refs/heads/master
c: 08d7a25
h: refs/heads/master
i:
  170263: 5634e21
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: baf9226667734579e344f612ed39f727079cad51
+refs/heads/master: 08d7a253e40db5a3b082bd7409b5f2c4f2184e59

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -31,31 +31,3 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
-Date:		August 2009
-Kernel Version:	2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Kicks of a rescan of the controller to discover logical
-		drive topology changes.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the 8-byte LUN ID used to address logical
-		drive Y of controller X.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the RAID level of logical drive Y of
-		controller X.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the usage count (number of opens) of logical drive Y
-		of controller X.

trunk/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc → trunk/Documentation/ABI/testing/sysfs-class-usb_host

@@ -1,4 +1,4 @@
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
+What:           /sys/class/usb_host/usb_hostN/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
+What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>

trunk/Documentation/ABI/testing/sysfs-devices-cache_disable

@@ -0,0 +1,18 @@
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com

trunk/Documentation/SubmittingPatches

@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 

trunk/Documentation/arm/tcm.txt

@@ -29,13 +29,11 @@ TCM location and size. Notice that this is not a MMU table: you
 actually move the physical location of the TCM around. At the
 place you put it, it will mask any underlying RAM from the
 CPU so it is usually wise not to overlap any physical RAM with
-the TCM.
+the TCM. The TCM memory exists totally outside the MMU and will
+override any MMU mappings.
 
-The TCM memory can then be remapped to another address again using
-the MMU, but notice that the TCM if often used in situations where
-the MMU is turned off. To avoid confusion the current Linux
-implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+Code executing inside the ITCM does not "see" any MMU mappings
+and e.g. register accesses must be made to physical addresses.
 
 TCM is used for a few things:
 

trunk/Documentation/cgroups/cgroups.txt

@@ -227,14 +227,7 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup.  This list
-   is not guaranteed to be sorted.  Writing a thread id into this file
-   moves the thread into this cgroup.
- - cgroup.procs: list of tgids in the cgroup.  This list is not
-   guaranteed to be sorted or free of duplicate tgids, and userspace
-   should sort/uniquify the list if this property is required.
-   Writing a tgid into this file moves all threads with that tgid into
-   this cgroup.
+ - tasks: list of tasks (by pid) attached to that cgroup
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -381,7 +374,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-cgroup.procs notify_on_release tasks
+notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:

trunk/Documentation/connector/cn_test.c

@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
+static void cn_test_callback(struct cn_msg *msg)
 {
 	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
 	        __func__, jiffies, msg->id.idx, msg->id.val,

trunk/Documentation/connector/connector.txt

@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
 
  Registers new callback with connector core.
 
  struct cb_id *id		- unique connector's user identifier.
 				  It must be registered in connector.h for legal in-kernel users.
  char *name			- connector's callback symbolic name.
- void (*callback) (struct cn..)	- connector's callback.
-				  cn_msg and the sender's credentials
+ void (*callback) (void *)	- connector's callback.
+				  Argument must be dereferenced to struct cn_msg *.
 
 
 void cn_del_callback(struct cb_id *id);