---

yaml
---
r: 149730
b: refs/heads/master
c: 0419305
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1eb99d5ac44e2a9ac0b2856c579ba4d7cc349ada
+refs/heads/master: 04193058c1005551af93f04a4b975fbd7f95cad5

trunk/drivers/net/ixgbe/ixgbe_82598.c

@@ -1089,35 +1089,56 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+
+	hw->phy.ops.identify(hw);
+
+	/* Copper PHY must be checked before AUTOC LMS to determine correct
+	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+		IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82598:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-				  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
-		break;
-	case IXGBE_DEV_ID_82598_BX:
-		physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
-	case IXGBE_DEV_ID_82598EB_CX4:
-	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
-		break;
-	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		else
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
 		break;
-	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
-	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else /* XAUI */
+			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
-	case IXGBE_DEV_ID_82598EB_XF_LR:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
 		break;
-	case IXGBE_DEV_ID_82598AT:
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_T);
+	default:
 		break;
-	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+	}
+
+	if (hw->phy.type == ixgbe_phy_nl) {
 		hw->phy.ops.identify_sfp(hw);
 
 		switch (hw->phy.sfp_type) {
@@ -1134,13 +1155,25 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 			break;
 		}
-		break;
+	}
 
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		break;
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 

trunk/drivers/net/ixgbe/ixgbe_82599.c

@@ -1177,53 +1177,98 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
 	u8 comp_codes_10g = 0;
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
-	case IXGBE_DEV_ID_82599_KX4:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
+	hw->phy.ops.identify(hw);
+
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+		IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
 		break;
-	case IXGBE_DEV_ID_82599_SFP:
-		hw->phy.ops.identify_sfp(hw);
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
 
-		switch (hw->phy.sfp_type) {
-		case ixgbe_sfp_type_da_cu:
-		case ixgbe_sfp_type_da_cu_core0:
-		case ixgbe_sfp_type_da_cu_core1:
-			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-			break;
-		case ixgbe_sfp_type_sr:
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		goto out;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tw_tyco:
+	case ixgbe_phy_tw_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			break;
-		case ixgbe_sfp_type_lr:
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			break;
-		case ixgbe_sfp_type_srlr_core0:
-		case ixgbe_sfp_type_srlr_core1:
-			hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_10GBE_COMP_CODES,
-			                            &comp_codes_10g);
-			if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			else
-				physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-		default:
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-			break;
-		}
 		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1271,6 +1316,22 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
 	return 0;
 }
 
+/**
+ *  ixgbe_get_device_caps_82599 - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -1280,6 +1341,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_device_caps        = &ixgbe_get_device_caps_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,

trunk/drivers/net/ixgbe/ixgbe_main.c

@@ -47,7 +47,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.8-k2"
+#define DRV_VERSION "2.0.16-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
 

trunk/drivers/net/ixgbe/ixgbe_phy.c

@@ -632,7 +632,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			hw->phy.multispeed_fiber = true;
 
 		/* Determine PHY vendor */
-		if (hw->phy.type == ixgbe_phy_unknown) {
+		if (hw->phy.type != ixgbe_phy_nl) {
 			hw->phy.id = identifier;
 			hw->phy.ops.read_i2c_eeprom(hw,
 			                            IXGBE_SFF_VENDOR_OUI_BYTE0,
@@ -682,9 +682,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			goto out;
 		}
 
-		hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET,
-		                    &enforce_sfp);
-		if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) {
+		/* This is guaranteed to be 82599, no need to check for NULL */
+		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
 			/* Make sure we're a supported PHY type */
 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
 				status = 0;

trunk/drivers/net/ixgbe/ixgbe_type.h

@@ -862,6 +862,7 @@
 #define IXGBE_MDIO_PHY_EXT_ABILITY        0xB /* Ext Ability Reg */
 #define IXGBE_MDIO_PHY_10GBASET_ABILITY   0x0004 /* 10GBaseT capable */
 #define IXGBE_MDIO_PHY_1000BASET_ABILITY  0x0020 /* 1000BaseT capable */
+#define IXGBE_MDIO_PHY_100BASETX_ABILITY  0x0080 /* 100BaseTX capable */
 
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR     0xC30A /* PHY_XS SDA/SCL Addr Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA     0xC30B /* PHY_XS SDA/SCL Data Reg */
@@ -898,8 +899,6 @@
 #define IXGBE_CONTROL_NL         0x000F
 #define IXGBE_CONTROL_EOL_NL     0x0FFF
 #define IXGBE_CONTROL_SOL_NL     0x0000
-#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C
-#define IXGBE_PHY_ALLOW_ANY_SFP            0x1
 
 /* General purpose Interrupt Enable */
 #define IXGBE_SDP0_GPIEN         0x00000001 /* SDP0 */
@@ -1385,6 +1384,7 @@
 #define IXGBE_FW_PTR            0x0F
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
+#define IXGBE_DEVICE_CAPS       0x2C
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
 
@@ -1428,6 +1428,8 @@
 #define IXGBE_EERD_ATTEMPTS 100000
 #endif
 
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP  0x1
+
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
 #define IXGBE_PCI_LINK_WIDTH      0x3F0
@@ -1865,7 +1867,7 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_UNKNOWN      0
 #define IXGBE_PHYSICAL_LAYER_10GBASE_T    0x0001
 #define IXGBE_PHYSICAL_LAYER_1000BASE_T   0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_T    0x0004
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX   0x0004
 #define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU  0x0008
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LR   0x0010
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LRM  0x0020
@@ -1874,6 +1876,7 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_10GBASE_CX4  0x0100
 #define IXGBE_PHYSICAL_LAYER_1000BASE_KX  0x0200
 #define IXGBE_PHYSICAL_LAYER_1000BASE_BX  0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR   0x0800
 
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
@@ -2105,6 +2108,7 @@ struct ixgbe_mac_operations {
 	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
 	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
 	s32 (*stop_adapter)(struct ixgbe_hw *);
 	s32 (*get_bus_info)(struct ixgbe_hw *);
 	void (*set_lan_id)(struct ixgbe_hw *);