---

yaml
---
r: 143356
b: refs/heads/master
c: a2c252e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1328df725239804ae30fc7257c1a3185e679b517
+refs/heads/master: a2c252ebdeaab28c9b400570594d576dae295958

trunk/Documentation/block/biodoc.txt

@@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers.
 iii. Plugging the queue to batch requests in anticipation of opportunities for
      merge/sort optimizations
 
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
 Plugging is an approach that the current i/o scheduling algorithm resorts to so
 that it collects up enough requests in the queue to be able to take
 advantage of the sorting/merging logic in the elevator. If the
 queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
 till it fills up with a few more requests, before starting to service
 the requests. This provides an opportunity to merge/sort the requests before
 passing them down to the device. There are various conditions when the queue is
 unplugged (to open up the flow again), either through a scheduled task or
 could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
 
 Aside:
   This is kind of controversial territory, as it's not clear if plugging is
@@ -1067,11 +1065,6 @@ Aside:
   multi-page bios being queued in one shot, we may not need to wait to merge
   a big request from the broken up pieces coming by.
 
-  Per-queue granularity unplugging (still a Todo) may help reduce some of the
-  concerns with just a single tq_disk flush approach. Something like
-  blk_kick_queue() to unplug a specific queue (right away ?)
-  or optionally, all queues, is in the plan.
-
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,

trunk/Documentation/powerpc/dts-bindings/fsl/i2c.txt

@@ -7,26 +7,42 @@ Required properties :
 
 Recommended properties :
 
- - compatible : Should be "fsl-i2c" for parts compatible with
-   Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
    the information in section 2) depending on the type of interrupt
    controller you have.
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
-   a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
-   uses the FSL 5200 clocking mechanism.
-
-Example :
-	i2c@3000 {
-		interrupt-parent = <40000>;
-		interrupts = <1b 3>;
-		reg = <3000 18>;
-		device_type = "i2c";
-		compatible  = "fsl-i2c";
-		dfsrr;
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+   from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Examples :
+
+	i2c@3d00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+		cell-index = <0>;
+		reg = <0x3d00 0x40>;
+		interrupts = <2 15 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		fsl,preserve-clocking;
 	};
+
+	i2c@3100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+		reg = <0x3100 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <400000>;
+	};
+

trunk/arch/powerpc/Kconfig

@@ -462,7 +462,7 @@ config PPC_64K_PAGES
 
 config PPC_256K_PAGES
 	bool "256k page size" if 44x
-	depends on !STDBINUTILS && (!SHMEM || BROKEN)
+	depends on !STDBINUTILS
 	help
 	  Make the page size 256k.
 

trunk/arch/powerpc/boot/dts/tqm8540.dts

@@ -84,9 +84,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {

trunk/arch/powerpc/boot/dts/tqm8541.dts

@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {

trunk/arch/powerpc/boot/dts/tqm8548-bigflash.dts

@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;

trunk/arch/powerpc/boot/dts/tqm8548.dts

@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;

trunk/arch/powerpc/boot/dts/tqm8555.dts

@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {

trunk/arch/powerpc/boot/dts/tqm8560.dts

@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {