---

yaml
---
r: 113987
b: refs/heads/master
c: e4aab64
h: refs/heads/master
i:
  113985: 4d86efe
  113983: 2b01c23
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8316568930074723bdc47d6777f822be0422a5b7
+refs/heads/master: e4aab64cb78a42e45e1d387f272712e06cf89a66

trunk/drivers/media/dvb/dm1105/dm1105.c

@@ -39,8 +39,8 @@
 #include "dvb-pll.h"
 
 #include "stv0299.h"
-/*#include "stv0288.h"
- *#include "stb6000.h"*/
+#include "stv0288.h"
+#include "stb6000.h"
 #include "si21xx.h"
 #include "cx24116.h"
 #include "z0194a.h"
@@ -594,13 +594,12 @@ static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb)
 
 	dm1105dvb_dma_unmap(dm1105dvb);
 }
-#if 0
+
 static struct stv0288_config earda_config = {
 	.demod_address = 0x68,
 	.min_delay_ms = 100,
 };
 
-#endif /* keep */
 static struct si21xx_config serit_config = {
 	.demod_address = 0x68,
 	.min_delay_ms = 100,
@@ -627,7 +626,7 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 			dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
 					&dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
 		}
-#if 0
+
 		if (!dm1105dvb->fe) {
 			dm1105dvb->fe = dvb_attach(
 				stv0288_attach, &earda_config,
@@ -639,7 +638,7 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 						&dm1105dvb->i2c_adap);
 			}
 		}
-#endif /* keep */
+
 		if (!dm1105dvb->fe) {
 			dm1105dvb->fe = dvb_attach(
 				si21xx_attach, &serit_config,

trunk/drivers/media/dvb/frontends/Kconfig

@@ -43,6 +43,20 @@ config DVB_S5H1420
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
+config DVB_STV0288
+	tristate "ST STV0288 based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_STB6000
+	tristate "ST STB6000 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	  help
+	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
+
 config DVB_STV0299
 	tristate "ST STV0299 based"
 	depends on DVB_CORE && I2C

trunk/drivers/media/dvb/frontends/Makefile

@@ -53,3 +53,5 @@ obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
 obj-$(CONFIG_DVB_AF9013) += af9013.o
 obj-$(CONFIG_DVB_CX24116) += cx24116.o
 obj-$(CONFIG_DVB_SI21XX) += si21xx.o
+obj-$(CONFIG_DVB_STV0299) += stv0288.o
+obj-$(CONFIG_DVB_STB6000) += stb6000.o

trunk/drivers/media/dvb/frontends/stb6000.c

@@ -0,0 +1,254 @@
+  /*
+     Driver for ST STB6000 DVBS Silicon tuner
+
+     Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of the GNU General Public License as published by
+     the Free Software Foundation; either version 2 of the License, or
+     (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+  */
+
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <asm/types.h>
+
+#include "stb6000.h"
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) \
+			printk(KERN_DEBUG "stb6000: " args); \
+	} while (0)
+
+struct stb6000_priv {
+	/* i2c details */
+	int i2c_address;
+	struct i2c_adapter *i2c;
+	u32 frequency;
+};
+
+static int stb6000_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static int stb6000_sleep(struct dvb_frontend *fe)
+{
+	struct stb6000_priv *priv = fe->tuner_priv;
+	int ret;
+	u8 buf[] = { 10, 0 };
+	struct i2c_msg msg = {
+		.addr = priv->i2c_address,
+		.flags = 0,
+		.buf = buf,
+		.len = 2
+	};
+
+	dprintk("%s:\n", __func__);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	ret = i2c_transfer(priv->i2c, &msg, 1);
+	if (ret != 1)
+		dprintk("%s: i2c error\n", __func__);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return (ret == 1) ? 0 : ret;
+}
+
+static int stb6000_set_params(struct dvb_frontend *fe,
+				struct dvb_frontend_parameters *params)
+{
+	struct stb6000_priv *priv = fe->tuner_priv;
+	unsigned int n, m;
+	int ret;
+	u32 freq_mhz;
+	int bandwidth;
+	u8 buf[12];
+	struct i2c_msg msg = {
+		.addr = priv->i2c_address,
+		.flags = 0,
+		.buf = buf,
+		.len = 12
+	};
+
+	dprintk("%s:\n", __func__);
+
+	freq_mhz = params->frequency / 1000;
+	bandwidth = params->u.qpsk.symbol_rate / 1000000;
+
+	if (bandwidth > 31)
+		bandwidth = 31;
+
+	if ((freq_mhz > 949) && (freq_mhz < 2151)) {
+		buf[0] = 0x01;
+		buf[1] = 0xac;
+		if (freq_mhz < 1950)
+			buf[1] = 0xaa;
+		if (freq_mhz < 1800)
+			buf[1] = 0xa8;
+		if (freq_mhz < 1650)
+			buf[1] = 0xa6;
+		if (freq_mhz < 1530)
+			buf[1] = 0xa5;
+		if (freq_mhz < 1470)
+			buf[1] = 0xa4;
+		if (freq_mhz < 1370)
+			buf[1] = 0xa2;
+		if (freq_mhz < 1300)
+			buf[1] = 0xa1;
+		if (freq_mhz < 1200)
+			buf[1] = 0xa0;
+		if (freq_mhz < 1075)
+			buf[1] = 0xbc;
+		if (freq_mhz < 1000)
+			buf[1] = 0xba;
+		if (freq_mhz < 1075) {
+			n = freq_mhz / 8; /* vco=lo*4 */
+			m = 2;
+		} else {
+			n = freq_mhz / 16; /* vco=lo*2 */
+			m = 1;
+		}
+		buf[2] = n >> 1;
+		buf[3] = (unsigned char)(((n & 1) << 7) |
+					(m * freq_mhz - n * 16) | 0x60);
+		buf[4] = 0x04;
+		buf[5] = 0x0e;
+
+		buf[6] = (unsigned char)(bandwidth);
+
+		buf[7] = 0xd8;
+		buf[8] = 0xd0;
+		buf[9] = 0x50;
+		buf[10] = 0xeb;
+		buf[11] = 0x4f;
+
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+
+		ret = i2c_transfer(priv->i2c, &msg, 1);
+		if (ret != 1)
+			dprintk("%s: i2c error\n", __func__);
+
+		udelay(10);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+
+		buf[0] = 0x07;
+		buf[1] = 0xdf;
+		buf[2] = 0xd0;
+		buf[3] = 0x50;
+		buf[4] = 0xfb;
+		msg.len = 5;
+
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+
+		ret = i2c_transfer(priv->i2c, &msg, 1);
+		if (ret != 1)
+			dprintk("%s: i2c error\n", __func__);
+
+		udelay(10);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+
+		priv->frequency = freq_mhz * 1000;
+
+		return (ret == 1) ? 0 : ret;
+	}
+	return -1;
+}
+
+static int stb6000_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct stb6000_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static struct dvb_tuner_ops stb6000_tuner_ops = {
+	.info = {
+		.name = "ST STB6000",
+		.frequency_min = 950000,
+		.frequency_max = 2150000
+	},
+	.release = stb6000_release,
+	.sleep = stb6000_sleep,
+	.set_params = stb6000_set_params,
+	.get_frequency = stb6000_get_frequency,
+};
+
+struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr,
+						struct i2c_adapter *i2c)
+{
+	struct stb6000_priv *priv = NULL;
+	u8 b1[] = { 0, 0 };
+	struct i2c_msg msg[2] = {
+		{
+			.addr = addr,
+			.flags = 0,
+			.buf = NULL,
+			.len = 0
+		}, {
+			.addr = addr,
+			.flags = I2C_M_RD,
+			.buf = b1,
+			.len = 2
+		}
+	};
+	int ret;
+
+	dprintk("%s:\n", __func__);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	/* is some i2c device here ? */
+	ret = i2c_transfer(i2c, msg, 2);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	if (ret != 2)
+		return NULL;
+
+	priv = kzalloc(sizeof(struct stb6000_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->i2c_address = addr;
+	priv->i2c = i2c;
+
+	memcpy(&fe->ops.tuner_ops, &stb6000_tuner_ops,
+				sizeof(struct dvb_tuner_ops));
+
+	fe->tuner_priv = priv;
+
+	return fe;
+}
+EXPORT_SYMBOL(stb6000_attach);
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("DVB STB6000 driver");
+MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>");
+MODULE_LICENSE("GPL");

trunk/drivers/media/dvb/frontends/stb6000.h

@@ -0,0 +1,51 @@
+  /*
+     Driver for ST stb6000 DVBS Silicon tuner
+
+     Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of the GNU General Public License as published by
+     the Free Software Foundation; either version 2 of the License, or
+     (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+  */
+
+#ifndef __DVB_STB6000_H__
+#define __DVB_STB6000_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+/**
+ * Attach a stb6000 tuner to the supplied frontend structure.
+ *
+ * @param fe Frontend to attach to.
+ * @param addr i2c address of the tuner.
+ * @param i2c i2c adapter to use.
+ * @return FE pointer on success, NULL on failure.
+ */
+#if defined(CONFIG_DVB_STB6000) || (defined(CONFIG_DVB_STB6000_MODULE) \
+							&& defined(MODULE))
+extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr,
+					   struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe,
+						  int addr,
+						  struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_STB6000 */
+
+#endif /* __DVB_STB6000_H__ */