Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver

Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt

@@ -0,0 +1,18 @@
+Atmel TCB PWM controller
+
+Required properties:
+- compatible: should be "atmel,tcb-pwm"
+- #pwm-cells: Should be 3.  The first cell specifies the per-chip index
+  of the PWM to use, the second cell is the period in nanoseconds and
+  bit 0 in the third cell is used to encode the polarity of PWM output.
+  Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity &
+  set to 0 for normal polarity.
+- tc-block: The Timer Counter block to use as a PWM chip.
+
+Example:
+
+pwm {
+	compatible = "atmel,tcb-pwm";
+	#pwm-cells = <3>;
+	tc-block = <1>;
+};

Documentation/devicetree/bindings/pwm/vt8500-pwm.txt

@@ -3,14 +3,17 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
 Required properties:
 - compatible: should be "via,vt8500-pwm"
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2.  The first cell specifies the per-chip index
-  of the PWM to use and the second cell is the period in nanoseconds.
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+  First cell specifies the per-chip index of the PWM to use, the second
+  cell is the period in nanoseconds and bit 0 in the third cell is used to
+  encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+  to 1 for inverse polarity & set to 0 for normal polarity.
 - clocks: phandle to the PWM source clock
 
 Example:
 
 pwm1: pwm@d8220000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "via,vt8500-pwm";
 	reg = <0xd8220000 0x1000>;
 	clocks = <&clkpwm>;

drivers/pwm/Kconfig

@@ -37,6 +37,18 @@ config PWM_AB8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-ab8500.
 
+config PWM_ATMEL_TCB
+	tristate "Atmel TC Block PWM support"
+	depends on ATMEL_TCLIB && OF
+	help
+	  Generic PWM framework driver for Atmel Timer Counter Block.
+
+	  A Timer Counter Block provides 6 PWM devices grouped by 2.
+	  Devices in a given group must have the same period.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-tcb.
+
 config PWM_BFIN
 	tristate "Blackfin PWM support"
 	depends on BFIN_GPTIMERS
@@ -47,7 +59,7 @@ config PWM_BFIN
 	  will be called pwm-bfin.
 
 config PWM_IMX
-	tristate "i.MX pwm support"
+	tristate "i.MX PWM support"
 	depends on ARCH_MXC
 	help
 	  Generic PWM framework driver for i.MX.
@@ -104,7 +116,7 @@ config PWM_PXA
 	  will be called pwm-pxa.
 
 config PWM_SAMSUNG
-	tristate "Samsung pwm support"
+	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG
 	help
 	  Generic PWM framework driver for Samsung.
@@ -183,7 +195,7 @@ config PWM_TWL_LED
 	  will be called pwm-twl-led.
 
 config PWM_VT8500
-	tristate "vt8500 pwm support"
+	tristate "vt8500 PWM support"
 	depends on ARCH_VT8500
 	help
 	  Generic PWM framework driver for vt8500.

drivers/pwm/Makefile

@@ -1,5 +1,6 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o

drivers/pwm/core.c

@@ -211,6 +211,7 @@ int pwm_set_chip_data(struct pwm_device *pwm, void *data)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pwm_set_chip_data);
 
 /**
  * pwm_get_chip_data() - get private chip data for a PWM
@@ -220,6 +221,7 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 {
 	return pwm ? pwm->chip_data : NULL;
 }
+EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
 /**
  * pwmchip_add() - register a new PWM chip
@@ -763,6 +765,18 @@ void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(devm_pwm_put);
 
+/**
+  * pwm_can_sleep() - report whether PWM access will sleep
+  * @pwm: PWM device
+  *
+  * It returns true if accessing the PWM can sleep, false otherwise.
+  */
+bool pwm_can_sleep(struct pwm_device *pwm)
+{
+	return pwm->chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(pwm_can_sleep);
+
 #ifdef CONFIG_DEBUG_FS
 static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
 {