Merge tag 'asoc-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/broonie/sound into for-next

ASoC: Updates for v3.12

A few more updates for v3.12, mostly small cleanups plus the addition of
the DT bindings for kirkwood and the new i.MX S/PDIF driver.

Documentation/devicetree/bindings/sound/imx-audio-spdif.txt

@@ -0,0 +1,34 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+  - compatible : "fsl,imx-audio-spdif"
+
+  - model : The user-visible name of this sound complex
+
+  - spdif-controller : The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+  - spdif-out : This is a boolean property. If present, the transmitting
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF out connector/jack on the board or it's connecting to some
+    other IP block, such as an HDMI encoder/display-controller.
+
+  - spdif-in : This is a boolean property. If present, the receiving
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF in connector/jack on the board.
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+	compatible = "fsl,imx-audio-spdif";
+	model = "imx-spdif";
+	spdif-controller = <&spdif>;
+	spdif-out;
+	spdif-in;
+};

Documentation/devicetree/bindings/sound/mvebu-audio.txt

@@ -0,0 +1,29 @@
+* mvebu (Kirkwood, Dove, Armada 370) audio controller
+
+Required properties:
+
+- compatible: "marvell,mvebu-audio"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: list of two irq numbers.
+  The first irq is used for data flow and the second one is used for errors.
+
+- clocks: one or two phandles.
+  The first one is mandatory and defines the internal clock.
+  The second one is optional and defines an external clock.
+
+- clock-names: names associated to the clocks:
+	"internal" for the internal clock
+	"extclk" for the external clock
+
+Example:
+
+i2s1: audio-controller@b4000 {
+	compatible = "marvell,mvebu-audio";
+	reg = <0xb4000 0x2210>;
+	interrupts = <21>, <22>;
+	clocks = <&gate_clk 13>;
+	clock-names = "internal";
+};

Documentation/kernel-parameters.txt

@@ -2953,7 +2953,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
-	swapaccount[=0|1]
+	swapaccount=[0|1]
 			[KNL] Enable accounting of swap in memory resource
 			controller if no parameter or 1 is given or disable
 			it if 0 is given (See Documentation/cgroups/memory.txt)

MAINTAINERS

@@ -5885,7 +5885,7 @@ F:	drivers/i2c/busses/i2c-omap.c
 F:	include/linux/i2c-omap.h
 
 OMAP DEVICE TREE SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
@@ -5965,14 +5965,14 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP HWMOD SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/arc/lib/strchr-700.S

@@ -39,9 +39,18 @@ ARC_ENTRY strchr
 	ld.a	r2,[r0,4]
 	sub	r12,r6,r7
 	bic	r12,r12,r6
+#ifdef __LITTLE_ENDIAN__
 	and	r7,r12,r4
 	breq	r7,0,.Loop ; For speed, we want this branch to be unaligned.
 	b	.Lfound_char ; Likewise this one.
+#else
+	and	r12,r12,r4
+	breq	r12,0,.Loop ; For speed, we want this branch to be unaligned.
+	lsr_s	r12,r12,7
+	bic 	r2,r7,r6
+	b.d	.Lfound_char_b
+	and_s	r2,r2,r12
+#endif
 ; /* We require this code address to be unaligned for speed...  */
 .Laligned:
 	ld_s	r2,[r0]
@@ -95,6 +104,7 @@ ARC_ENTRY strchr
 	lsr	r7,r7,7
 
 	bic	r2,r7,r6
+.Lfound_char_b:
 	norm	r2,r2
 	sub_s	r0,r0,4
 	asr_s	r2,r2,3

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -14,11 +14,11 @@
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -94,8 +94,9 @@
 
 		usb0: ohci@00600000 {
 			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+					   &pioD 19 GPIO_ACTIVE_LOW
 					   &pioD 20 GPIO_ACTIVE_LOW
 					  >;
 		};

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -830,6 +830,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 24 0>; /* PD0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -412,6 +412,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 170 0>; /* PV2 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-whistler.dts

@@ -588,6 +588,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vbus3_reg: regulator@3 {
@@ -598,6 +600,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/kernel/fiq.c

@@ -89,7 +89,8 @@ void set_fiq_handler(void *start, unsigned int length)
 
 	memcpy(base + offset, start, length);
 	if (!cache_is_vipt_nonaliasing())
-		flush_icache_range(base + offset, offset + length);
+		flush_icache_range((unsigned long)base + offset, offset +
+				   length);
 	flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
 }
 

arch/arm/kernel/machine_kexec.c

@@ -82,6 +82,7 @@ void machine_crash_nonpanic_core(void *unused)
 	crash_save_cpu(&regs, smp_processor_id());
 	flush_cache_all();
 
+	set_cpu_online(smp_processor_id(), false);
 	atomic_dec(&waiting_for_crash_ipi);
 	while (1)
 		cpu_relax();

arch/arm/kvm/coproc.c

@@ -146,16 +146,20 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
 #define access_pmintenclr pm_fake
 
 /* Architected CP15 registers.
- * Important: Must be sorted ascending by CRn, CRM, Op1, Op2
+ * CRn denotes the primary register number, but is copied to the CRm in the
+ * user space API for 64-bit register access in line with the terminology used
+ * in the ARM ARM.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit
+ *            registers preceding 32-bit ones.
  */
 static const struct coproc_reg cp15_regs[] = {
 	/* CSSELR: swapped by interrupt.S. */
 	{ CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
 			NULL, reset_unknown, c0_CSSELR },
 
 	/* TTBR0/TTBR1: swapped by interrupt.S. */
-	{ CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
-	{ CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
+	{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
+	{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
 
 	/* TTBCR: swapped by interrupt.S. */
 	{ CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32,
@@ -182,7 +186,7 @@ static const struct coproc_reg cp15_regs[] = {
 			NULL, reset_unknown, c6_IFAR },
 
 	/* PAR swapped by interrupt.S */
-	{ CRn( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR },
+	{ CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR },
 
 	/*
 	 * DC{C,I,CI}SW operations:
@@ -399,12 +403,13 @@ static bool index_to_params(u64 id, struct coproc_params *params)
 			      | KVM_REG_ARM_OPC1_MASK))
 			return false;
 		params->is_64bit = true;
-		params->CRm = ((id & KVM_REG_ARM_CRM_MASK)
+		/* CRm to CRn: see cp15_to_index for details */
+		params->CRn = ((id & KVM_REG_ARM_CRM_MASK)
 			       >> KVM_REG_ARM_CRM_SHIFT);
 		params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK)
 			       >> KVM_REG_ARM_OPC1_SHIFT);
 		params->Op2 = 0;
-		params->CRn = 0;
+		params->CRm = 0;
 		return true;
 	default:
 		return false;
@@ -898,7 +903,14 @@ static u64 cp15_to_index(const struct coproc_reg *reg)
 	if (reg->is_64) {
 		val |= KVM_REG_SIZE_U64;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
-		val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT);
+		/*
+		 * CRn always denotes the primary coproc. reg. nr. for the
+		 * in-kernel representation, but the user space API uses the
+		 * CRm for the encoding, because it is modelled after the
+		 * MRRC/MCRR instructions: see the ARM ARM rev. c page
+		 * B3-1445
+		 */
+		val |= (reg->CRn << KVM_REG_ARM_CRM_SHIFT);
 	} else {
 		val |= KVM_REG_SIZE_U32;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);

arch/arm/kvm/coproc.h

@@ -135,6 +135,8 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 		return -1;
 	if (i1->CRn != i2->CRn)
 		return i1->CRn - i2->CRn;
+	if (i1->is_64 != i2->is_64)
+		return i2->is_64 - i1->is_64;
 	if (i1->CRm != i2->CRm)
 		return i1->CRm - i2->CRm;
 	if (i1->Op1 != i2->Op1)
@@ -145,6 +147,7 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 
 #define CRn(_x)		.CRn = _x
 #define CRm(_x) 	.CRm = _x
+#define CRm64(_x)       .CRn = _x, .CRm = 0
 #define Op1(_x) 	.Op1 = _x
 #define Op2(_x) 	.Op2 = _x
 #define is64		.is_64 = true

arch/arm/kvm/coproc_a15.c

@@ -114,7 +114,11 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu,
 
 /*
  * A15-specific CP15 registers.
- * Important: Must be sorted ascending by CRn, CRM, Op1, Op2
+ * CRn denotes the primary register number, but is copied to the CRm in the
+ * user space API for 64-bit register access in line with the terminology used
+ * in the ARM ARM.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit
+ *            registers preceding 32-bit ones.
  */
 static const struct coproc_reg a15_regs[] = {
 	/* MPIDR: we use VMPIDR for guest access. */

arch/arm/kvm/mmio.c

@@ -63,7 +63,8 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		      struct kvm_exit_mmio *mmio)
 {
-	unsigned long rt, len;
+	unsigned long rt;
+	int len;
 	bool is_write, sign_extend;
 
 	if (kvm_vcpu_dabt_isextabt(vcpu)) {