---

yaml
---
r: 150826
b: refs/heads/master
c: 84503dd
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2f0accc13520b2644b85f80aedce10d10d88b0ca
+refs/heads/master: 84503ddd65e804ccdeedee3f307b40d80ff793e6

trunk/drivers/net/can/sja1000/sja1000_of_platform.c

@@ -108,15 +108,17 @@ static int __devinit sja1000_ofp_probe(struct of_device *ofdev,
 	res_size = resource_size(&res);
 
 	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
-		dev_err(&ofdev->dev, "couldn't request %#x..%#x\n",
-			res.start, res.end);
+		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
 		return -EBUSY;
 	}
 
 	base = ioremap_nocache(res.start, res_size);
 	if (!base) {
-		dev_err(&ofdev->dev, "couldn't ioremap %#x..%#x\n",
-			res.start, res.end);
+		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
 		err = -ENOMEM;
 		goto exit_release_mem;
 	}

trunk/drivers/net/qlge/qlge.h

@@ -65,6 +65,17 @@
 
 #define DB_PAGE_SIZE 4096
 
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+	MPI_TEST_FUNC_PORT_CFG = 0x1002,
+	MPI_TEST_NIC1_FUNC_SHIFT = 1,
+	MPI_TEST_NIC2_FUNC_SHIFT = 5,
+	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+};
+
 /*
  * Processor Address Register (PROC_ADDR) bit definitions.
  */
@@ -1430,7 +1441,10 @@ struct ql_adapter {
 
 	/* Hardware information */
 	u32 chip_rev_id;
+	u32 fw_rev_id;
 	u32 func;		/* PCI function for this adapter */
+	u32 alt_func;		/* PCI function for alternate adapter */
+	u32 port;		/* Port number this adapter */
 
 	spinlock_t adapter_lock;
 	spinlock_t hw_lock;
@@ -1580,6 +1594,8 @@ void ql_mpi_idc_work(struct work_struct *work);
 void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
+int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
+int ql_mb_about_fw(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP

trunk/drivers/net/qlge/qlge_ethtool.c

@@ -293,7 +293,10 @@ static void ql_get_drvinfo(struct net_device *ndev,
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	strncpy(drvinfo->driver, qlge_driver_name, 32);
 	strncpy(drvinfo->version, qlge_driver_version, 32);
-	strncpy(drvinfo->fw_version, "N/A", 32);
+	snprintf(drvinfo->fw_version, 32, "v%d.%d.%d",
+		 (qdev->fw_rev_id & 0x00ff0000) >> 16,
+		 (qdev->fw_rev_id & 0x0000ff00) >> 8,
+		 (qdev->fw_rev_id & 0x000000ff));
 	strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
 	drvinfo->n_stats = 0;
 	drvinfo->testinfo_len = 0;
@@ -401,6 +404,7 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,

trunk/drivers/net/qlge/qlge_main.c

@@ -675,11 +675,12 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 	int status;
 	__le32 *p = (__le32 *)&qdev->flash;
 	u32 offset;
+	u8 mac_addr[6];
 
 	/* Get flash offset for function and adjust
 	 * for dword access.
 	 */
-	if (!qdev->func)
+	if (!qdev->port)
 		offset = FUNC0_FLASH_OFFSET / sizeof(u32);
 	else
 		offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -705,14 +706,26 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 		goto exit;
 	}
 
-	if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
+	/* Extract either manufacturer or BOFM modified
+	 * MAC address.
+	 */
+	if (qdev->flash.flash_params_8000.data_type1 == 2)
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr1,
+			qdev->ndev->addr_len);
+	else
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr,
+			qdev->ndev->addr_len);
+
+	if (!is_valid_ether_addr(mac_addr)) {
 		QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
 		status = -EINVAL;
 		goto exit;
 	}
 
 	memcpy(qdev->ndev->dev_addr,
-		qdev->flash.flash_params_8000.mac_addr,
+		mac_addr,
 		qdev->ndev->addr_len);
 
 exit:
@@ -731,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 	/* Second function's parameters follow the first
 	 * function's.
 	 */
-	if (qdev->func)
+	if (qdev->port)
 		offset = size;
 
 	if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -837,6 +850,13 @@ int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data)
 static int ql_8000_port_initialize(struct ql_adapter *qdev)
 {
 	int status;
+	/*
+	 * Get MPI firmware version for driver banner
+	 * and ethool info.
+	 */
+	status = ql_mb_about_fw(qdev);
+	if (status)
+		goto exit;
 	status = ql_mb_get_fw_state(qdev);
 	if (status)
 		goto exit;
@@ -1518,6 +1538,22 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		return;
 	}
 
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+					ib_mac_rsp->flags2);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
@@ -1540,7 +1576,6 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	 * csum or frame errors.
 	 */
 	if (qdev->rx_csum &&
-		!(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -3185,9 +3220,10 @@ static void ql_display_dev_info(struct net_device *ndev)
 	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
 	QPRINTK(qdev, PROBE, INFO,
-		"Function #%d, NIC Roll %d, NIC Rev = %d, "
+		"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
 		"XG Roll = %d, XG Rev = %d.\n",
 		qdev->func,
+		qdev->port,
 		qdev->chip_rev_id & 0x0000000f,
 		qdev->chip_rev_id >> 4 & 0x0000000f,
 		qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3263,7 +3299,6 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	err = ql_adapter_initialize(qdev);
 	if (err) {
 		QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
-		spin_unlock(&qdev->hw_lock);
 		goto err_init;
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3360,7 +3395,6 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 * completion handler rx_rings.
 	 */
 	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
-	netif_set_gso_max_size(qdev->ndev, 65536);
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
@@ -3643,12 +3677,53 @@ static struct nic_operations qla8000_nic_ops = {
 	.port_initialize	= ql_8000_port_initialize,
 };
 
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
+{
+	int status = 0;
+	u32 temp;
+	u32 nic_func1, nic_func2;
+
+	status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+			&temp);
+	if (status)
+		return status;
+
+	nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+	nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+
+	if (qdev->func == nic_func1)
+		qdev->alt_func = nic_func2;
+	else if (qdev->func == nic_func2)
+		qdev->alt_func = nic_func1;
+	else
+		status = -EIO;
+
+	return status;
+}
 
-static void ql_get_board_info(struct ql_adapter *qdev)
+static int ql_get_board_info(struct ql_adapter *qdev)
 {
+	int status;
 	qdev->func =
 	    (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-	if (qdev->func) {
+	if (qdev->func > 3)
+		return -EIO;
+
+	status = ql_get_alt_pcie_func(qdev);
+	if (status)
+		return status;
+
+	qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+	if (qdev->port) {
 		qdev->xg_sem_mask = SEM_XGMAC1_MASK;
 		qdev->port_link_up = STS_PL1;
 		qdev->port_init = STS_PI1;
@@ -3667,6 +3742,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
 		qdev->nic_ops = &qla8012_nic_ops;
 	else if (qdev->device_id == QLGE_DEVICE_ID_8000)
 		qdev->nic_ops = &qla8000_nic_ops;
+	return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3761,7 +3837,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
-	ql_get_board_info(qdev);
+	err = ql_get_board_info(qdev);
+	if (err) {
+		dev_err(&pdev->dev, "Register access failed.\n");
+		err = -EIO;
+		goto err_out;
+	}
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
 	spin_lock_init(&qdev->stats_lock);

trunk/drivers/net/qlge/qlge_mpi.c

@@ -547,6 +547,40 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	return status;
 }
 
+
+/* Get MPI firmware version. This will be used for
+ * driver banner and for ethtool info.
+ * Returns zero on success.
+ */
+int ql_mb_about_fw(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 3;
+
+	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed about firmware command\n");
+		status = -EIO;
+	}
+
+	/* Store the firmware version */
+	qdev->fw_rev_id = mbcp->mbox_out[1];
+
+	return status;
+}
+
 /* Get functional state for MPI firmware.
  * Returns zero on success.
  */

trunk/net/8021q/vlan.c

@@ -758,7 +758,7 @@ static void __exit vlan_cleanup_module(void)
 		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
 
 	unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
-	synchronize_net();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	vlan_gvrp_uninit();
 }

trunk/net/can/af_can.c

@@ -903,6 +903,8 @@ static __exit void can_exit(void)
 	}
 	spin_unlock(&can_rcvlists_lock);
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(rcv_cache);
 }
 

trunk/net/ipv4/netfilter/nf_nat_proto_sctp.c

@@ -58,7 +58,7 @@ sctp_manip_pkt(struct sk_buff *skb,
 	}
 
 	crc32 = sctp_start_cksum((u8 *)hdr, skb_headlen(skb) - hdroff);
-	skb_walk_frags(skb, frag);
+	skb_walk_frags(skb, frag)
 		crc32 = sctp_update_cksum((u8 *)frag->data, skb_headlen(frag),
 					  crc32);
 	crc32 = sctp_end_cksum(crc32);

trunk/net/netfilter/nfnetlink_queue.c

@@ -1,6 +1,6 @@
 /*
  * This is a module which is used for queueing packets and communicating with
- * userspace via nfetlink.
+ * userspace via nfnetlink.
  *
  * (C) 2005 by Harald Welte <laforge@netfilter.org>
  * (C) 2007 by Patrick McHardy <kaber@trash.net>
@@ -932,6 +932,8 @@ static void __exit nfnetlink_queue_fini(void)
 #endif
 	nfnetlink_subsys_unregister(&nfqnl_subsys);
 	netlink_unregister_notifier(&nfqnl_rtnl_notifier);
+
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_DESCRIPTION("netfilter packet queue handler");

trunk/net/sctp/protocol.c

@@ -1370,6 +1370,8 @@ SCTP_STATIC __exit void sctp_exit(void)
 	sctp_proc_exit();
 	cleanup_sctp_mibs();
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(sctp_chunk_cachep);
 	kmem_cache_destroy(sctp_bucket_cachep);
 }

trunk/net/sunrpc/auth_gss/auth_gss.c

@@ -1548,6 +1548,7 @@ static void __exit exit_rpcsec_gss(void)
 {
 	gss_svc_shutdown();
 	rpcauth_unregister(&authgss_ops);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_LICENSE("GPL");