Merge branch 'renesas/boards2' into next/late

Conflicts:
	arch/arm/mach-shmobile/setup-r8a7778.c

This is a dependency for the Renesas sh-sci updates.

Signedf-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-shmobile/board-ape6evm.c

@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
+#include <linux/sh_clk.h>
 #include <linux/smsc911x.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -65,7 +66,21 @@ static const struct pinctrl_map ape6evm_pinctrl_map[] = {
 
 static void __init ape6evm_add_standard_devices(void)
 {
+
+	struct clk *parent;
+	struct clk *mp;
+
 	r8a73a4_clock_init();
+
+	/* MP clock parent = extal2 */
+	parent      = clk_get(NULL, "extal2");
+	mp          = clk_get(NULL, "mp");
+	BUG_ON(IS_ERR(parent) || IS_ERR(mp));
+
+	clk_set_parent(mp, parent);
+	clk_put(parent);
+	clk_put(mp);
+
 	pinctrl_register_mappings(ape6evm_pinctrl_map,
 				  ARRAY_SIZE(ape6evm_pinctrl_map));
 	r8a73a4_pinmux_init();

arch/arm/mach-shmobile/board-bockw.c

@@ -18,14 +18,52 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
 #include <asm/mach/arch.h>
 
+/*
+ *	CN9(Upper side) SCIF/RCAN selection
+ *
+ *		1,4	3,6
+ * SW40		SCIF	RCAN
+ * SW41		SCIF	RCAN
+ */
+
+/*
+ * MMC (CN26) pin
+ *
+ * SW6	(D2)	3 pin
+ * SW7	(D5)	ON
+ * SW8	(D3)	3 pin
+ * SW10	(D4)	1 pin
+ * SW12	(CLK)	1 pin
+ * SW13	(D6)	3 pin
+ * SW14	(CMD)	ON
+ * SW15	(D6)	1 pin
+ * SW16	(D0)	ON
+ * SW17	(D1)	ON
+ * SW18	(D7)	3 pin
+ * SW19	(MMC)	1 pin
+ */
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 static struct smsc911x_platform_config smsc911x_data = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
@@ -38,46 +76,153 @@ static struct resource smsc911x_resources[] = {
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct sh_eth_plat_data ether_platform_data __initdata = {
+	.phy		= 0x01,
+	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
+	.register_type	= SH_ETH_REG_FAST_RCAR,
+	.phy_interface	= PHY_INTERFACE_MODE_RMII,
+	/*
+	 * Although the LINK signal is available on the board, it's connected to
+	 * the link/activity LED output of the PHY, thus the link disappears and
+	 * reappears after each packet.  We'd be better off ignoring such signal
+	 * and getting the link state from the PHY indirectly.
+	 */
+	.no_ether_link	= 1,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("rx8581", 0x51),
+	},
+};
+
+/* HSPI*/
+static struct mtd_partition m25p80_spi_flash_partitions[] = {
+	{
+		.name	= "data(spi)",
+		.size	= 0x0100000,
+		.offset	= 0,
+	},
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name		= "m25p80",
+	.type		= "s25fl008k",
+	.parts		= m25p80_spi_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "m25p80",
+		.max_speed_hz	= 104000000,
+		.chip_select	= 0,
+		.bus_num	= 0,
+		.mode		= SPI_MODE_0,
+		.platform_data	= &spi_flash_data,
+	},
+};
+
+/* MMC */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+};
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* Ether */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
+				  "ether_rmii", "ether"),
+	/* HSPI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
+				  "hspi0_a", "hspi0"),
+	/* MMC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
+				  "mmc_data8", "mmc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
+				  "mmc_ctrl", "mmc"),
 	/* SCIF0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
 				  "scif0_data_a", "scif0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
 				  "scif0_ctrl", "scif0"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0", "sdhi0"),
 };
 
+#define FPGA	0x18200000
 #define IRQ0MR	0x30
+#define PFC	0xfffc0000
+#define PUPR4	0x110
 static void __init bockw_init(void)
 {
-	void __iomem *fpga;
+	void __iomem *base;
 
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
+	r8a7778_add_ether_device(&ether_platform_data);
+	r8a7778_add_i2c_device(0);
+	r8a7778_add_hspi_device(0);
+	r8a7778_add_mmc_device(&sh_mmcif_plat);
 
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	spi_register_board_info(spi_board_info,
+				ARRAY_SIZE(spi_board_info));
 	pinctrl_register_mappings(bockw_pinctrl_map,
 				  ARRAY_SIZE(bockw_pinctrl_map));
 	r8a7778_pinmux_init();
 
-	fpga = ioremap_nocache(0x18200000, SZ_1M);
-	if (fpga) {
+	/* for SMSC */
+	base = ioremap_nocache(FPGA, SZ_1M);
+	if (base) {
 		/*
 		 * CAUTION
 		 *
 		 * IRQ0/1 is cascaded interrupt from FPGA.
 		 * it should be cared in the future
 		 * Now, it is assuming IRQ0 was used only from SMSC.
 		 */
-		u16 val = ioread16(fpga + IRQ0MR);
+		u16 val = ioread16(base + IRQ0MR);
 		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-		iounmap(fpga);
+		iowrite16(val, base + IRQ0MR);
+		iounmap(base);
+
+		regulator_register_fixed(0, dummy_supplies,
+					 ARRAY_SIZE(dummy_supplies));
 
 		platform_device_register_resndata(
 			&platform_bus, "smsc911x", -1,
 			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
 			&smsc911x_data, sizeof(smsc911x_data));
 	}
+
+	/* for SDHI */
+	base = ioremap_nocache(PFC, 0x200);
+	if (base) {
+		/*
+		 * FIXME
+		 *
+		 * SDHI CD/WP pin needs pull-up
+		 */
+		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
+		iounmap(base);
+
+		r8a7778_sdhi_init(0, &sdhi0_info);
+	}
 }
 
 static const char *bockw_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/board-kzm9d.c

@@ -56,7 +56,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device smsc91x_device = {
 	.name	= "smsc911x",
-	.id	= 0,
+	.id	= -1,
 	.dev	= {
 		  .platform_data = &smsc911x_platdata,
 		},