[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purp…

…oses.

Add ERROR and WARM_START modes for diagnostic purposes.

Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/lpfc/lpfc.h

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -175,25 +175,27 @@ struct lpfc_hba {
 	uint16_t pci_cfg_value;
 
 	struct semaphore hba_can_block;
-	uint32_t hba_state;
-
-#define LPFC_INIT_START           1	/* Initial state after board reset */
-#define LPFC_INIT_MBX_CMDS        2	/* Initialize HBA with mbox commands */
-#define LPFC_LINK_DOWN            3	/* HBA initialized, link is down */
-#define LPFC_LINK_UP              4	/* Link is up  - issue READ_LA */
-#define LPFC_LOCAL_CFG_LINK       5	/* local NPORT Id configured */
-#define LPFC_FLOGI                6	/* FLOGI sent to Fabric */
-#define LPFC_FABRIC_CFG_LINK      7	/* Fabric assigned NPORT Id
+	int32_t hba_state;
+
+#define LPFC_STATE_UNKNOWN        0    /* HBA state is unknown */
+#define LPFC_WARM_START           1    /* HBA state after selective reset */
+#define LPFC_INIT_START           2    /* Initial state after board reset */
+#define LPFC_INIT_MBX_CMDS        3    /* Initialize HBA with mbox commands */
+#define LPFC_LINK_DOWN            4    /* HBA initialized, link is down */
+#define LPFC_LINK_UP              5    /* Link is up  - issue READ_LA */
+#define LPFC_LOCAL_CFG_LINK       6    /* local NPORT Id configured */
+#define LPFC_FLOGI                7    /* FLOGI sent to Fabric */
+#define LPFC_FABRIC_CFG_LINK      8    /* Fabric assigned NPORT Id
 					   configured */
-#define LPFC_NS_REG               8	/* Register with NameServer */
-#define LPFC_NS_QRY               9	/* Query NameServer for NPort ID list */
-#define LPFC_BUILD_DISC_LIST      10	/* Build ADISC and PLOGI lists for
+#define LPFC_NS_REG               9	/* Register with NameServer */
+#define LPFC_NS_QRY               10	/* Query NameServer for NPort ID list */
+#define LPFC_BUILD_DISC_LIST      11	/* Build ADISC and PLOGI lists for
 					 * device authentication / discovery */
-#define LPFC_DISC_AUTH            11	/* Processing ADISC list */
-#define LPFC_CLEAR_LA             12	/* authentication cmplt - issue
+#define LPFC_DISC_AUTH            12	/* Processing ADISC list */
+#define LPFC_CLEAR_LA             13	/* authentication cmplt - issue
 					   CLEAR_LA */
 #define LPFC_HBA_READY            32
-#define LPFC_HBA_ERROR            0xff
+#define LPFC_HBA_ERROR            -1
 
 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
 

drivers/scsi/lpfc/lpfc_attr.c

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -149,6 +149,8 @@ lpfc_state_show(struct class_device *cdev, char *buf)
 	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
 	int len = 0;
 	switch (phba->hba_state) {
+	case LPFC_STATE_UNKNOWN:
+	case LPFC_WARM_START:
 	case LPFC_INIT_START:
 	case LPFC_INIT_MBX_CMDS:
 	case LPFC_LINK_DOWN:
@@ -278,6 +280,58 @@ lpfc_board_online_store(struct class_device *cdev, const char *buf,
 		return -EIO;
 }
 
+static ssize_t
+lpfc_board_mode_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+	char  * state;
+
+	if (phba->hba_state == LPFC_HBA_ERROR)
+		state = "error";
+	else if (phba->hba_state == LPFC_WARM_START)
+		state = "warm start";
+	else if (phba->hba_state == LPFC_INIT_START)
+		state = "offline";
+	else
+		state = "online";
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", state);
+}
+
+static ssize_t
+lpfc_board_mode_store(struct class_device *cdev, const char *buf, size_t count)
+{
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+	struct completion online_compl;
+	int status=0;
+
+	init_completion(&online_compl);
+
+	if(strncmp(buf, "online", sizeof("online") - 1) == 0)
+		lpfc_workq_post_event(phba, &status, &online_compl,
+				      LPFC_EVT_ONLINE);
+	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+		lpfc_workq_post_event(phba, &status, &online_compl,
+				      LPFC_EVT_OFFLINE);
+	else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
+		lpfc_workq_post_event(phba, &status, &online_compl,
+				      LPFC_EVT_WARM_START);
+ 	else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
+		lpfc_workq_post_event(phba, &status, &online_compl,
+				      LPFC_EVT_KILL);
+	else
+		return -EINVAL;
+
+	wait_for_completion(&online_compl);
+
+	if (!status)
+		return strlen(buf);
+	else
+		return -EIO;
+}
+
 static ssize_t
 lpfc_poll_show(struct class_device *cdev, char *buf)
 {
@@ -480,6 +534,8 @@ static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show,
 			 NULL);
 static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR,
 			 lpfc_board_online_show, lpfc_board_online_store);
+static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
+			 lpfc_board_mode_show, lpfc_board_mode_store);
 
 static int lpfc_poll = 0;
 module_param(lpfc_poll, int, 0);
@@ -674,6 +730,7 @@ struct class_device_attribute *lpfc_host_attrs[] = {
 	&class_device_attr_nport_evt_cnt,
 	&class_device_attr_management_version,
 	&class_device_attr_board_online,
+	&class_device_attr_board_mode,
 	&class_device_attr_lpfc_poll,
 	&class_device_attr_lpfc_poll_tmo,
 	NULL,
@@ -883,8 +940,11 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 		case MBX_DUMP_MEMORY:
 		case MBX_DOWN_LOAD:
 		case MBX_UPDATE_CFG:
+		case MBX_KILL_BOARD:
 		case MBX_LOAD_AREA:
 		case MBX_LOAD_EXP_ROM:
+		case MBX_BEACON:
+		case MBX_DEL_LD_ENTRY:
 			break;
 		case MBX_READ_SPARM64:
 		case MBX_READ_LA:
@@ -1042,6 +1102,8 @@ lpfc_get_host_port_state(struct Scsi_Host *shost)
 		fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
 	else {
 		switch (phba->hba_state) {
+		case LPFC_STATE_UNKNOWN:
+		case LPFC_WARM_START:
 		case LPFC_INIT_START:
 		case LPFC_INIT_MBX_CMDS:
 		case LPFC_LINK_DOWN:

drivers/scsi/lpfc/lpfc_crtn.h

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -107,6 +107,7 @@ void lpfc_fdmi_tmo_handler(struct lpfc_hba *);
 int lpfc_config_port_prep(struct lpfc_hba *);
 int lpfc_config_port_post(struct lpfc_hba *);
 int lpfc_hba_down_prep(struct lpfc_hba *);
+int lpfc_hba_down_post(struct lpfc_hba *);
 void lpfc_hba_init(struct lpfc_hba *, uint32_t *);
 int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int, int);
 void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int);
@@ -123,6 +124,7 @@ irqreturn_t lpfc_intr_handler(int, void *, struct pt_regs *);
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
 void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
 
@@ -135,6 +137,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba);
 struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
 void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
+
+int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
+int lpfc_sli_brdkill(struct lpfc_hba *);
+int lpfc_sli_brdreset(struct lpfc_hba *);
+int lpfc_sli_brdrestart(struct lpfc_hba *);
 int lpfc_sli_hba_setup(struct lpfc_hba *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);

drivers/scsi/lpfc/lpfc_disc.h

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -28,18 +28,24 @@
  * This is used by Fibre Channel protocol to support FCP.
  */
 
+/* worker thread events */
+enum lpfc_work_type {
+	LPFC_EVT_NODEV_TMO,
+	LPFC_EVT_ONLINE,
+	LPFC_EVT_OFFLINE,
+	LPFC_EVT_WARM_START,
+	LPFC_EVT_KILL,
+	LPFC_EVT_ELS_RETRY,
+};
+
 /* structure used to queue event to the discovery tasklet */
 struct lpfc_work_evt {
 	struct list_head      evt_listp;
 	void                * evt_arg1;
 	void                * evt_arg2;
-	uint32_t              evt;
+	enum lpfc_work_type   evt;
 };
 
-#define LPFC_EVT_NODEV_TMO	0x1
-#define LPFC_EVT_ONLINE		0x2
-#define LPFC_EVT_OFFLINE	0x3
-#define LPFC_EVT_ELS_RETRY	0x4
 
 struct lpfc_nodelist {
 	struct list_head nlp_listp;

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -120,11 +120,33 @@ lpfc_work_list_done(struct lpfc_hba * phba)
 			free_evt = 0;
 			break;
 		case LPFC_EVT_ONLINE:
-			*(int *)(evtp->evt_arg1)  = lpfc_online(phba);
+			if (phba->hba_state < LPFC_LINK_DOWN)
+				*(int *)(evtp->evt_arg1)  = lpfc_online(phba);
+			else
+				*(int *)(evtp->evt_arg1)  = 0;
 			complete((struct completion *)(evtp->evt_arg2));
 			break;
 		case LPFC_EVT_OFFLINE:
-			*(int *)(evtp->evt_arg1)  = lpfc_offline(phba);
+			if (phba->hba_state >= LPFC_LINK_DOWN)
+				lpfc_offline(phba);
+			lpfc_sli_brdrestart(phba);
+			*(int *)(evtp->evt_arg1) =
+				lpfc_sli_brdready(phba,HS_FFRDY | HS_MBRDY);
+			complete((struct completion *)(evtp->evt_arg2));
+			break;
+		case LPFC_EVT_WARM_START:
+			if (phba->hba_state >= LPFC_LINK_DOWN)
+				lpfc_offline(phba);
+			lpfc_sli_brdreset(phba);
+			lpfc_hba_down_post(phba);
+			*(int *)(evtp->evt_arg1) =
+				lpfc_sli_brdready(phba, HS_MBRDY);
+			complete((struct completion *)(evtp->evt_arg2));
+			break;
+		case LPFC_EVT_KILL:
+			if (phba->hba_state >= LPFC_LINK_DOWN)
+				lpfc_offline(phba);
+			*(int *)(evtp->evt_arg1)  = lpfc_sli_brdkill(phba);
 			complete((struct completion *)(evtp->evt_arg2));
 			break;
 		}
@@ -287,6 +309,10 @@ lpfc_linkdown(struct lpfc_hba * phba)
 	LPFC_MBOXQ_t     *mb;
 	int               rc, i;
 
+	if (phba->hba_state == LPFC_LINK_DOWN) {
+		return 0;
+	}
+
 	psli = &phba->sli;
 
 	/* sysfs or selective reset may call this routine to clean up */

drivers/scsi/lpfc/lpfc_hw.h

@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -1233,7 +1233,9 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_SET_MASK        0x20
 #define MBX_SET_SLIM        0x21
 #define MBX_UNREG_D_ID      0x23
+#define MBX_KILL_BOARD      0x24
 #define MBX_CONFIG_FARP     0x25
+#define MBX_BEACON          0x2A
 
 #define MBX_LOAD_AREA       0x81
 #define MBX_RUN_BIU_DIAG64  0x84