Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-next-2.6 into for-davem

MAINTAINERS

@@ -4097,6 +4097,12 @@ S:	Maintained
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
+MARVELL MWIFIEX WIRELESS DRIVER
+M:	Bing Zhao <bzhao@marvell.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/net/wireless/mwifiex/
+
 MARVELL MWL8K WIRELESS DRIVER
 M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	linux-wireless@vger.kernel.org
@@ -6938,9 +6944,9 @@ S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL1251 WIRELESS DRIVER
-M:	Kalle Valo <kvalo@adurom.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl1251
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
 F:	drivers/net/wireless/wl1251/*

drivers/bcma/core.c

@@ -50,3 +50,75 @@ int bcma_core_enable(struct bcma_device *core, u32 flags)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(bcma_core_enable);
+
+void bcma_core_set_clockmode(struct bcma_device *core,
+			     enum bcma_clkmode clkmode)
+{
+	u16 i;
+
+	WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
+		core->id.id != BCMA_CORE_PCIE &&
+		core->id.id != BCMA_CORE_80211);
+
+	switch (clkmode) {
+	case BCMA_CLKMODE_FAST:
+		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+		udelay(64);
+		for (i = 0; i < 1500; i++) {
+			if (bcma_read32(core, BCMA_CLKCTLST) &
+			    BCMA_CLKCTLST_HAVEHT) {
+				i = 0;
+				break;
+			}
+			udelay(10);
+		}
+		if (i)
+			pr_err("HT force timeout\n");
+		break;
+	case BCMA_CLKMODE_DYNAMIC:
+		pr_warn("Dynamic clockmode not supported yet!\n");
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(bcma_core_set_clockmode);
+
+void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
+{
+	u16 i;
+
+	WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
+	WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
+
+	if (on) {
+		bcma_set32(core, BCMA_CLKCTLST, req);
+		for (i = 0; i < 10000; i++) {
+			if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
+			    status) {
+				i = 0;
+				break;
+			}
+			udelay(10);
+		}
+		if (i)
+			pr_err("PLL enable timeout\n");
+	} else {
+		pr_warn("Disabling PLL not supported yet!\n");
+	}
+}
+EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+
+u32 bcma_core_dma_translation(struct bcma_device *core)
+{
+	switch (core->bus->hosttype) {
+	case BCMA_HOSTTYPE_PCI:
+		if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
+			return BCMA_DMA_TRANSLATION_DMA64_CMT;
+		else
+			return BCMA_DMA_TRANSLATION_DMA32_CMT;
+	default:
+		pr_err("DMA translation unknown for host %d\n",
+		       core->bus->hosttype);
+	}
+	return BCMA_DMA_TRANSLATION_NONE;
+}
+EXPORT_SYMBOL(bcma_core_dma_translation);

drivers/bcma/driver_chipcommon.c

@@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
 
 void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 {
+	u32 leddc_on = 10;
+	u32 leddc_off = 90;
+
 	if (cc->core->id.rev >= 11)
 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
@@ -38,6 +41,17 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 		bcma_pmu_init(cc);
 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
 		pr_err("Power control not implemented!\n");
+
+	if (cc->core->id.rev >= 16) {
+		if (cc->core->bus->sprom.leddc_on_time &&
+		    cc->core->bus->sprom.leddc_off_time) {
+			leddc_on = cc->core->bus->sprom.leddc_on_time;
+			leddc_off = cc->core->bus->sprom.leddc_off_time;
+		}
+		bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
+			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
+	}
 }
 
 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */

drivers/bcma/driver_pci.c

@@ -172,8 +172,10 @@ static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
 	    chipid_top != 0x5300)
 		return false;
 
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
 		return false;
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
 
 #if 0
 	/* TODO: on BCMA we use address from EROM instead of magic formula */

drivers/bcma/sprom.c

@@ -20,12 +20,12 @@
  * R/W ops.
  **************************************************/
 
-static void bcma_sprom_read(struct bcma_bus *bus, u16 *sprom)
+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
 {
 	int i;
 	for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
 		sprom[i] = bcma_read16(bus->drv_cc.core,
-				       BCMA_CC_SPROM + (i * 2));
+				       offset + (i * 2));
 }
 
 /**************************************************
@@ -112,7 +112,7 @@ static int bcma_sprom_valid(const u16 *sprom)
 		return err;
 
 	revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
-	if (revision != 8) {
+	if (revision != 8 && revision != 9) {
 		pr_err("Unsupported SPROM revision: %d\n", revision);
 		return -ENOENT;
 	}
@@ -137,6 +137,7 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 
 int bcma_sprom_get(struct bcma_bus *bus)
 {
+	u16 offset;
 	u16 *sprom;
 	int err = 0;
 
@@ -151,7 +152,12 @@ int bcma_sprom_get(struct bcma_bus *bus)
 	if (!sprom)
 		return -ENOMEM;
 
-	bcma_sprom_read(bus, sprom);
+	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
+	 * According to brcm80211 this applies to cards with PCIe rev >= 6
+	 * TODO: understand this condition and use it */
+	offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
+		BCMA_CC_SPROM_PCIE6;
+	bcma_sprom_read(bus, offset, sprom);
 
 	err = bcma_sprom_valid(sprom);
 	if (err)

drivers/net/wireless/ath/ath5k/ahb.c

@@ -35,8 +35,8 @@ static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
 static bool
 ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath5k_softc *sc = common->priv;
-	struct platform_device *pdev = to_platform_device(sc->dev);
+	struct ath5k_hw *ah = common->priv;
+	struct platform_device *pdev = to_platform_device(ah->dev);
 	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
 	u16 *eeprom, *eeprom_end;
 
@@ -56,21 +56,19 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 
 int ath5k_hw_read_srev(struct ath5k_hw *ah)
 {
-	struct ath5k_softc *sc = ah->ah_sc;
-	struct platform_device *pdev = to_platform_device(sc->dev);
+	struct platform_device *pdev = to_platform_device(ah->dev);
 	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
 	ah->ah_mac_srev = bcfg->devid;
 	return 0;
 }
 
 static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 {
-	struct ath5k_softc *sc = ah->ah_sc;
-	struct platform_device *pdev = to_platform_device(sc->dev);
+	struct platform_device *pdev = to_platform_device(ah->dev);
 	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
 	u8 *cfg_mac;
 
-	if (to_platform_device(sc->dev)->id == 0)
+	if (to_platform_device(ah->dev)->id == 0)
 		cfg_mac = bcfg->config->wlan0_mac;
 	else
 		cfg_mac = bcfg->config->wlan1_mac;
@@ -90,7 +88,7 @@ static const struct ath_bus_ops ath_ahb_bus_ops = {
 static int ath_ahb_probe(struct platform_device *pdev)
 {
 	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
-	struct ath5k_softc *sc;
+	struct ath5k_hw *ah;
 	struct ieee80211_hw *hw;
 	struct resource *res;
 	void __iomem *mem;
@@ -127,19 +125,19 @@ static int ath_ahb_probe(struct platform_device *pdev)
 
 	irq = res->start;
 
-	hw = ieee80211_alloc_hw(sizeof(struct ath5k_softc), &ath5k_hw_ops);
+	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
 	if (hw == NULL) {
 		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
 		ret = -ENOMEM;
 		goto err_out;
 	}
 
-	sc = hw->priv;
-	sc->hw = hw;
-	sc->dev = &pdev->dev;
-	sc->iobase = mem;
-	sc->irq = irq;
-	sc->devid = bcfg->devid;
+	ah = hw->priv;
+	ah->hw = hw;
+	ah->dev = &pdev->dev;
+	ah->iobase = mem;
+	ah->irq = irq;
+	ah->devid = bcfg->devid;
 
 	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
 		/* Enable WMAC AHB arbitration */
@@ -155,7 +153,7 @@ static int ath_ahb_probe(struct platform_device *pdev)
 		/* Enable WMAC DMA access (assuming 5312 or 231x*/
 		/* TODO: check other platforms */
 		reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(sc->dev)->id == 0)
+		if (to_platform_device(ah->dev)->id == 0)
 			reg |= AR5K_AR5312_ENABLE_WLAN0;
 		else
 			reg |= AR5K_AR5312_ENABLE_WLAN1;
@@ -166,13 +164,13 @@ static int ath_ahb_probe(struct platform_device *pdev)
 		 * used as pass-through. Disable 2 GHz support in the
 		 * driver for it
 		 */
-		if (to_platform_device(sc->dev)->id == 0 &&
+		if (to_platform_device(ah->dev)->id == 0 &&
 		    (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
 		     (BD_WLAN1 | BD_WLAN0))
-			__set_bit(ATH_STAT_2G_DISABLED, sc->status);
+			__set_bit(ATH_STAT_2G_DISABLED, ah->status);
 	}
 
-	ret = ath5k_init_softc(sc, &ath_ahb_bus_ops);
+	ret = ath5k_init_softc(ah, &ath_ahb_bus_ops);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
 		ret = -ENODEV;
@@ -194,13 +192,13 @@ static int ath_ahb_remove(struct platform_device *pdev)
 {
 	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
 	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-	struct ath5k_softc *sc;
+	struct ath5k_hw *ah;
 	u32 reg;
 
 	if (!hw)
 		return 0;
 
-	sc = hw->priv;
+	ah = hw->priv;
 
 	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
 		/* Disable WMAC AHB arbitration */
@@ -210,14 +208,14 @@ static int ath_ahb_remove(struct platform_device *pdev)
 	} else {
 		/*Stop DMA access */
 		reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(sc->dev)->id == 0)
+		if (to_platform_device(ah->dev)->id == 0)
 			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
 		else
 			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
 		__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
 	}
 
-	ath5k_deinit_softc(sc);
+	ath5k_deinit_softc(ah);
 	platform_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);