Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless into for-davem

drivers/bluetooth/Kconfig

@@ -201,7 +201,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8897.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -214,7 +214,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver

drivers/bluetooth/btmrvl_sdio.c

@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 	.io_port_2 = 0x7a,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x50,
+	.sq_read_base_addr_a0 = 0x60,
+	.sq_read_base_addr_a1 = 0x61,
+	.card_revision = 0xbc,
+	.card_fw_status0 = 0xc0,
+	.card_fw_status1 = 0xc1,
+	.card_rx_len = 0xc2,
+	.card_rx_unit = 0xc3,
+	.io_port_0 = 0xd8,
+	.io_port_1 = 0xd9,
+	.io_port_2 = 0xda,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.sd_blksz_fw_dl	= 256,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8897_uapsta.bin",
+	.reg		= &btmrvl_reg_88xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8688 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8797 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
 			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+	/* Marvell SD8897 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
 
 	{ }	/* Terminating entry */
 };
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");

drivers/net/wireless/ath/ath9k/Kconfig

@@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG
 	  This option enables collection of statistics for Rx/Tx status
 	  data and some other MAC related statistics
 
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
 	bool "Atheros ath9k rate control"
 	depends on ATH9K
-	default y
+	default n
 	---help---
 	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht.
+	  module instead of minstrel_ht. Be warned that there are various
+	  issues with the ath9k RC and minstrel is a more robust algorithm.
+	  Note that even if this option is selected, "ath9k_rate_control"
+	  has to be passed to mac80211 using the module parameter,
+	  ieee80211_default_rc_algo.
 
 config ATH9K_HTC
        tristate "Atheros HTC based wireless cards support"

drivers/net/wireless/ath/ath9k/Makefile

@@ -8,7 +8,7 @@ ath9k-y +=	beacon.o \
 		antenna.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o

drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h

@@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = {
 	{0x0000a074, 0x00000000},
 	{0x0000a078, 0x00000000},
 	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x1a1a1a1a},
-	{0x0000a084, 0x1a1a1a1a},
-	{0x0000a088, 0x1a1a1a1a},
-	{0x0000a08c, 0x1a1a1a1a},
-	{0x0000a090, 0x171a1a1a},
+	{0x0000a080, 0x22222229},
+	{0x0000a084, 0x1d1d1d1d},
+	{0x0000a088, 0x1d1d1d1d},
+	{0x0000a08c, 0x1d1d1d1d},
+	{0x0000a090, 0x171d1d1d},
 	{0x0000a094, 0x11111717},
 	{0x0000a098, 0x00030311},
 	{0x0000a09c, 0x00000000},

drivers/net/wireless/ath/ath9k/init.c

@@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->iface_combinations = if_comb;
 	hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
 
-	if (AR_SREV_5416(sc->sc_ah))
-		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
@@ -830,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	sc->ant_rx = hw->wiphy->available_antennas_rx;
 	sc->ant_tx = hw->wiphy->available_antennas_tx;
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
-	hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&sc->sbands[IEEE80211_BAND_2GHZ];

drivers/net/wireless/ath/ath9k/rc.h

@@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
 }
 #endif
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
+#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
 int ath_rate_control_register(void);
 void ath_rate_control_unregister(void);
 #else

drivers/net/wireless/b43/main.c

@@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work)
 	for (i = 0; i < B43_NR_FWTYPES; i++) {
 		errmsg = ctx->errors[i];
 		if (strlen(errmsg))
-			b43err(dev->wl, errmsg);
+			b43err(dev->wl, "%s", errmsg);
 	}
 	b43_print_fw_helptext(dev->wl, 1);
 	goto out;

drivers/net/wireless/iwlegacy/common.h

@@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
 __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
 			  u32 beacon_interval);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 extern const struct dev_pm_ops il_pm_ops;
 
 #define IL_LEGACY_PM_OPS	(&il_pm_ops)
 
-#else /* !CONFIG_PM */
+#else /* !CONFIG_PM_SLEEP */
 
 #define IL_LEGACY_PM_OPS	NULL
 
-#endif /* !CONFIG_PM */
+#endif /* !CONFIG_PM_SLEEP */
 
 /*****************************************************
 *  Error Handling Debugging

drivers/net/wireless/mwifiex/debugfs.c

@@ -26,10 +26,17 @@
 static struct dentry *mwifiex_dfs_dir;
 
 static char *bss_modes[] = {
-	"Unknown",
-	"Ad-hoc",
-	"Managed",
-	"Auto"
+	"UNSPECIFIED",
+	"ADHOC",
+	"STATION",
+	"AP",
+	"AP_VLAN",
+	"WDS",
+	"MONITOR",
+	"MESH_POINT",
+	"P2P_CLIENT",
+	"P2P_GO",
+	"P2P_DEVICE",
 };
 
 /* size/addr for mwifiex_debug_info */
@@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf,
 	p += sprintf(p, "driver_version = %s", fmt);
 	p += sprintf(p, "\nverext = %s", priv->version_str);
 	p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
-	p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
+
+	if (info.bss_mode >= ARRAY_SIZE(bss_modes))
+		p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode);
+	else
+		p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
+
 	p += sprintf(p, "media_state=\"%s\"\n",
 		     (!priv->media_connected ? "Disconnected" : "Connected"));
 	p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr);

drivers/net/wireless/rtlwifi/pci.c

@@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
 				 "can't alloc skb for rx\n");
 			goto done;
 		}
+		kmemleak_not_leak(new_skb);
 
 		pci_unmap_single(rtlpci->pdev,
 				 *((dma_addr_t *) skb->cb),