gianfar: Fall back to software tcp/udp checksum on older controllers

As specified by errata eTSEC49 of MPC8548 and errata eTSEC12 of MPC83xx,
older revisions of gianfar controllers will be unable to calculate a TCP/UDP
packet checksum for some alignments of the appropriate FCB. This patch checks
for FCB alignment on such controllers and falls back to software checksumming
if the alignment is known to be bad.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/gianfar.c

@@ -949,6 +949,11 @@ static void gfar_detect_errata(struct gfar_private *priv)
 			(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
 		priv->errata |= GFAR_ERRATA_A002;
 
+	/* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */
+	if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) ||
+			(pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020))
+		priv->errata |= GFAR_ERRATA_12;
+
 	if (priv->errata)
 		dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
 			 priv->errata);
@@ -2154,8 +2159,15 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Set up checksumming */
 	if (CHECKSUM_PARTIAL == skb->ip_summed) {
 		fcb = gfar_add_fcb(skb);
-		lstatus |= BD_LFLAG(TXBD_TOE);
-		gfar_tx_checksum(skb, fcb);
+		/* as specified by errata */
+		if (unlikely(gfar_has_errata(priv, GFAR_ERRATA_12)
+			     && ((unsigned long)fcb % 0x20) > 0x18)) {
+			__skb_pull(skb, GMAC_FCB_LEN);
+			skb_checksum_help(skb);
+		} else {
+			lstatus |= BD_LFLAG(TXBD_TOE);
+			gfar_tx_checksum(skb, fcb);
+		}
 	}
 
 	if (vlan_tx_tag_present(skb)) {

drivers/net/gianfar.h

@@ -1039,6 +1039,7 @@ enum gfar_errata {
 	GFAR_ERRATA_74		= 0x01,
 	GFAR_ERRATA_76		= 0x02,
 	GFAR_ERRATA_A002	= 0x04,
+	GFAR_ERRATA_12		= 0x08, /* a.k.a errata eTSEC49 */
 };
 
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source