---

yaml
---
r: 323432
b: refs/heads/master
c: 1ad346a
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 51c80b74002f86477d691ed7c8ac479dcfa6271c
+refs/heads/master: 1ad346a9f8ca0d266ddbfdbbbd8913782b417f35

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

trunk/Documentation/feature-removal-schedule.txt

@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

trunk/arch/arm/boot/dts/at91sam9g25ek.dts

@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

trunk/arch/arm/configs/armadillo800eva_defconfig

@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

trunk/arch/arm/mach-at91/at91rm9200_time.c

@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting

trunk/arch/arm/mach-at91/at91sam9260_devices.c

@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9260_rtt_device.num_resources = 2;
+	at91sam9260_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9261_devices.c

@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9261_rtt_device.num_resources = 2;
+	at91sam9261_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9263_devices.c

@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
 		 * The second resource is needed only for the chosen RTT:
 		 * GPBR will serve as the storage for RTC time offset
 		 */
-		at91sam9263_rtt0_device.num_resources = 2;
+		at91sam9263_rtt0_device.num_resources = 3;
 		at91sam9263_rtt1_device.num_resources = 1;
 		pdev = &at91sam9263_rtt0_device;
 		r = rtt0_resources;
 		break;
 	case 1:
 		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 2;
+		at91sam9263_rtt1_device.num_resources = 3;
 		pdev = &at91sam9263_rtt1_device;
 		r = rtt1_resources;
 		break;
@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
 	pdev->name = "rtc-at91sam9";
 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	r[1].end = r[1].start + 3;
+	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9g45_rtt_device.num_resources = 2;
+	at91sam9g45_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9rl_devices.c

@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9rl_rtt_device.num_resources = 2;
+	at91sam9rl_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/clock.c

@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
+#define cpu_has_240M_plla()	(cpu_is_at91sam9261() \
+				|| cpu_is_at91sam9263() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla()	(cpu_is_at91sam9260())
+
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
+	} else if (cpu_has_240M_plla()) {
+		if (plla.rate_hz > 240000000)
+			pll_overclock = true;
+	} else if (cpu_has_210M_plla()) {
+		if (plla.rate_hz > 210000000)
+			pll_overclock = true;
 	} else {
 		if (plla.rate_hz > 209000000)
 			pll_overclock = true;

trunk/arch/arm/mach-gemini/irq.c

@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 #include <mach/hardware.h>
 
 #define IRQ_SOURCE(base_addr)	(base_addr + 0x00)

trunk/arch/arm/mach-kirkwood/db88f6281-bp-setup.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>

trunk/arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
 };
 
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
 
 static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW3", .wakeup = 1),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW4"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW5"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW6"),
 };
 
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
 	&camera_device,
 	&ceu0_device,
 	&fsi_device,
-	&fsi_hdmi_device,
 	&fsi_wm8978_device,
+	&fsi_hdmi_device,
 };
 
 static void __init eva_clock_init(void)

trunk/arch/arm/mach-shmobile/board-mackerel.c

@@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
  *  - J30 "open"
  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
  */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE		(1 << 4)
@@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs1_device,
 	&usbhs0_device,
+	&usbhs1_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

trunk/arch/arm/mach-shmobile/board-marzen.c

@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device eth_device = {
 	.name		= "smsc911x",
-	.id		= 0,
+	.id		= -1,
 	.dev  = {
 		.platform_data = &smsc911x_platdata,
 	},

trunk/arch/arm/mach-shmobile/intc-sh73a0.c

@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
 
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,

trunk/arch/powerpc/include/asm/processor.h

@@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+extern void power7_nap(void);
 
 #ifdef CONFIG_PSERIES_IDLE
 extern void update_smt_snooze_delay(int snooze);

trunk/arch/powerpc/kernel/asm-offsets.c

@@ -76,6 +76,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */

trunk/arch/powerpc/kernel/dbell.c

@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 

trunk/arch/powerpc/kernel/entry_64.S

@@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)

trunk/arch/powerpc/kernel/exceptions-64s.S

@@ -186,7 +186,7 @@ hardware_interrupt_hv:
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
 
 	MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
-	MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer)
+	STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
 
 	STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
@@ -486,6 +486,7 @@ machine_check_common:
 
 	STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
 	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
+	STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
 	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)