tty: add more tty_port fields

Move more bits into the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/cyclades.c

@@ -2677,8 +2677,8 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->closing = 1;
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	if (info->closing_wait != CY_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
+	if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->port.closing_wait);
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
@@ -2734,9 +2734,9 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	info->port.tty = NULL;
 	if (info->port.blocked_open) {
 		spin_unlock_irqrestore(&card->card_lock, flags);
-		if (info->close_delay) {
+		if (info->port.close_delay) {
 			msleep_interruptible(jiffies_to_msecs
-						(info->close_delay));
+						(info->port.close_delay));
 		}
 		wake_up_interruptible(&info->port.open_wait);
 		spin_lock_irqsave(&card->card_lock, flags);
@@ -3382,8 +3382,8 @@ get_serial_info(struct cyclades_port *info,
 		cinfo->first_line;
 	tmp.irq = cinfo->irq;
 	tmp.flags = info->port.flags;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
+	tmp.close_delay = info->port.close_delay;
+	tmp.closing_wait = info->port.closing_wait;
 	tmp.baud_base = info->baud;
 	tmp.custom_divisor = info->custom_divisor;
 	tmp.hub6 = 0;		/*!!! */
@@ -3402,7 +3402,7 @@ set_serial_info(struct cyclades_port *info,
 	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
-		if (new_serial.close_delay != info->close_delay ||
+		if (new_serial.close_delay != info->port.close_delay ||
 				new_serial.baud_base != info->baud ||
 				(new_serial.flags & ASYNC_FLAGS &
 					~ASYNC_USR_MASK) !=
@@ -3424,8 +3424,8 @@ set_serial_info(struct cyclades_port *info,
 	info->custom_divisor = new_serial.custom_divisor;
 	info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
 			(new_serial.flags & ASYNC_FLAGS);
-	info->close_delay = new_serial.close_delay * HZ / 100;
-	info->closing_wait = new_serial.closing_wait * HZ / 100;
+	info->port.close_delay = new_serial.close_delay * HZ / 100;
+	info->port.closing_wait = new_serial.closing_wait * HZ / 100;
 
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
@@ -3971,11 +3971,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		break;
 #endif				/* CONFIG_CYZ_INTR */
 	case CYSETWAIT:
-		info->closing_wait = (unsigned short)arg * HZ / 100;
+		info->port.closing_wait = (unsigned short)arg * HZ / 100;
 		ret_val = 0;
 		break;
 	case CYGETWAIT:
-		ret_val = info->closing_wait / (HZ / 100);
+		ret_val = info->port.closing_wait / (HZ / 100);
 		break;
 	case TIOCGSERIAL:
 		ret_val = get_serial_info(info, argp);
@@ -4376,13 +4376,13 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 	for (port = cinfo->first_line; port < cinfo->first_line + nports;
 			port++) {
 		info = &cinfo->ports[port - cinfo->first_line];
+		tty_port_init(&info->port);
 		info->magic = CYCLADES_MAGIC;
 		info->card = cinfo;
 		info->line = port;
-		info->closing_wait = CLOSING_WAIT_DELAY;
-		info->close_delay = 5 * HZ / 10;
 
-		tty_port_init(&info->port);
+		info->port.closing_wait = CLOSING_WAIT_DELAY;
+		info->port.close_delay = 5 * HZ / 10;
 		info->port.flags = STD_COM_FLAGS;
 		init_completion(&info->shutdown_wait);
 		init_waitqueue_head(&info->delta_msr_wait);

drivers/char/isicom.c

@@ -199,10 +199,8 @@ struct	isi_board {
 struct	isi_port {
 	unsigned short		magic;
 	struct tty_port		port;
-	int			close_delay;
 	u16			channel;
 	u16			status;
-	u16			closing_wait;
 	struct isi_board	*card;
 	unsigned char		*xmit_buf;
 	int			xmit_head;
@@ -1051,8 +1049,8 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
 	tty->closing = 1;
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, port->closing_wait);
+	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, port->port.closing_wait);
 	/* indicate to the card that no more data can be received
 	   on this port */
 	spin_lock_irqsave(&card->card_lock, flags);
@@ -1071,10 +1069,10 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
 
 	if (port->port.blocked_open) {
 		spin_unlock_irqrestore(&card->card_lock, flags);
-		if (port->close_delay) {
+		if (port->port.close_delay) {
 			pr_dbg("scheduling until time out.\n");
 			msleep_interruptible(
-				jiffies_to_msecs(port->close_delay));
+				jiffies_to_msecs(port->port.close_delay));
 		}
 		spin_lock_irqsave(&card->card_lock, flags);
 		wake_up_interruptible(&port->port.open_wait);
@@ -1256,8 +1254,8 @@ static int isicom_set_serial_info(struct isi_port *port,
 		(newinfo.flags & ASYNC_SPD_MASK));
 
 	if (!capable(CAP_SYS_ADMIN)) {
-		if ((newinfo.close_delay != port->close_delay) ||
-				(newinfo.closing_wait != port->closing_wait) ||
+		if ((newinfo.close_delay != port->port.close_delay) ||
+				(newinfo.closing_wait != port->port.closing_wait) ||
 				((newinfo.flags & ~ASYNC_USR_MASK) !=
 				(port->port.flags & ~ASYNC_USR_MASK))) {
 			unlock_kernel();
@@ -1266,8 +1264,8 @@ static int isicom_set_serial_info(struct isi_port *port,
 		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
 				(newinfo.flags & ASYNC_USR_MASK));
 	} else {
-		port->close_delay = newinfo.close_delay;
-		port->closing_wait = newinfo.closing_wait;
+		port->port.close_delay = newinfo.close_delay;
+		port->port.closing_wait = newinfo.closing_wait;
 		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
 				(newinfo.flags & ASYNC_FLAGS));
 	}
@@ -1294,8 +1292,8 @@ static int isicom_get_serial_info(struct isi_port *port,
 	out_info.irq = port->card->irq;
 	out_info.flags = port->port.flags;
 /*	out_info.baud_base = ? */
-	out_info.close_delay = port->close_delay;
-	out_info.closing_wait = port->closing_wait;
+	out_info.close_delay = port->port.close_delay;
+	out_info.closing_wait = port->port.closing_wait;
 	unlock_kernel();
 	if (copy_to_user(info, &out_info, sizeof(out_info)))
 		return -EFAULT;
@@ -1804,13 +1802,13 @@ static int __init isicom_init(void)
 		isi_card[idx].ports = port;
 		spin_lock_init(&isi_card[idx].card_lock);
 		for (channel = 0; channel < 16; channel++, port++) {
+			tty_port_init(&port->port);
 			port->magic = ISICOM_MAGIC;
 			port->card = &isi_card[idx];
 			port->channel = channel;
-			port->close_delay = 50 * HZ/100;
-			port->closing_wait = 3000 * HZ/100;
+			port->port.close_delay = 50 * HZ/100;
+			port->port.closing_wait = 3000 * HZ/100;
 			port->status = 0;
-			tty_port_init(&port->port);
 			/*  . . .  */
 		}
 		isi_card[idx].base = 0;

drivers/char/moxa.c

@@ -135,7 +135,6 @@ struct moxa_port {
 	void __iomem *tableAddr;
 
 	int type;
-	int close_delay;
 	int cflag;
 	unsigned long statusflags;
 
@@ -822,10 +821,9 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 	}
 
 	for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+		tty_port_init(&p->port);
 		p->type = PORT_16550A;
-		p->close_delay = 5 * HZ / 10;
 		p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
-		tty_port_init(&p->port);
 	}
 
 	switch (brd->boardType) {
@@ -2124,7 +2122,7 @@ static int moxa_get_serial_info(struct moxa_port *info,
 		.line = info->port.tty->index,
 		.flags = info->port.flags,
 		.baud_base = 921600,
-		.close_delay = info->close_delay
+		.close_delay = info->port.close_delay
 	};
 	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
 }
@@ -2148,7 +2146,7 @@ static int moxa_set_serial_info(struct moxa_port *info,
 		     (info->port.flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
 	} else
-		info->close_delay = new_serial.close_delay * HZ / 100;
+		info->port.close_delay = new_serial.close_delay * HZ / 100;
 
 	new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
 	new_serial.flags |= (info->port.flags & ASYNC_FLAGS);

drivers/char/mxser.c

@@ -243,10 +243,7 @@ struct mxser_port {
 	unsigned char ldisc_stop_rx;
 
 	int custom_divisor;
-	int close_delay;
-	unsigned short closing_wait;
 	unsigned char err_shadow;
-	unsigned long event;
 
 	struct async_icount icount; /* kernel counters for 4 input interrupts */
 	int timeout;
@@ -1199,8 +1196,8 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
+	if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->port.closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
@@ -1231,11 +1228,10 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	tty_ldisc_flush(tty);
 
 	tty->closing = 0;
-	info->event = 0;
 	info->port.tty = NULL;
 	if (info->port.blocked_open) {
-		if (info->close_delay)
-			schedule_timeout_interruptible(info->close_delay);
+		if (info->port.close_delay)
+			schedule_timeout_interruptible(info->port.close_delay);
 		wake_up_interruptible(&info->port.open_wait);
 	}
 
@@ -1370,8 +1366,8 @@ static int mxser_get_serial_info(struct mxser_port *info,
 		.irq = info->board->irq,
 		.flags = info->port.flags,
 		.baud_base = info->baud_base,
-		.close_delay = info->close_delay,
-		.closing_wait = info->closing_wait,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
 		.custom_divisor = info->custom_divisor,
 		.hub6 = 0
 	};
@@ -1402,7 +1398,7 @@ static int mxser_set_serial_info(struct mxser_port *info,
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if ((new_serial.baud_base != info->baud_base) ||
-				(new_serial.close_delay != info->close_delay) ||
+				(new_serial.close_delay != info->port.close_delay) ||
 				((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
 		info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
@@ -1414,8 +1410,8 @@ static int mxser_set_serial_info(struct mxser_port *info,
 		 */
 		info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
 				(new_serial.flags & ASYNC_FLAGS));
-		info->close_delay = new_serial.close_delay * HZ / 100;
-		info->closing_wait = new_serial.closing_wait * HZ / 100;
+		info->port.close_delay = new_serial.close_delay * HZ / 100;
+		info->port.closing_wait = new_serial.closing_wait * HZ / 100;
 		info->port.tty->low_latency =
 				(info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 		info->port.tty->low_latency = 0;
@@ -2214,7 +2210,6 @@ static void mxser_hangup(struct tty_struct *tty)
 
 	mxser_flush_buffer(tty);
 	mxser_shutdown(info);
-	info->event = 0;
 	info->port.count = 0;
 	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->port.tty = NULL;
@@ -2545,6 +2540,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
 	for (i = 0; i < brd->info->nports; i++) {
 		info = &brd->ports[i];
+		tty_port_init(&info->port);
 		info->board = brd;
 		info->stop_rx = 0;
 		info->ldisc_stop_rx = 0;
@@ -2559,10 +2555,9 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 		process_txrx_fifo(info);
 
 		info->custom_divisor = info->baud_base * 16;
-		info->close_delay = 5 * HZ / 10;
-		info->closing_wait = 30 * HZ;
+		info->port.close_delay = 5 * HZ / 10;
+		info->port.closing_wait = 30 * HZ;
 		info->normal_termios = mxvar_sdriver->init_termios;
-		tty_port_init(&info->port);
 		init_waitqueue_head(&info->delta_msr_wait);
 		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
 		info->err_shadow = 0;

drivers/char/riscom8.c

@@ -1032,8 +1032,8 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
-	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, port->closing_wait);
+	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, port->port.closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
@@ -1065,8 +1065,8 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
 	tty->closing = 0;
 	port->port.tty = NULL;
 	if (port->port.blocked_open) {
-		if (port->close_delay)
-			msleep_interruptible(jiffies_to_msecs(port->close_delay));
+		if (port->port.close_delay)
+			msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
 		wake_up_interruptible(&port->port.open_wait);
 	}
 	port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -1295,8 +1295,8 @@ static int rc_set_serial_info(struct riscom_port *port,
 			(tmp.flags & ASYNC_SPD_MASK));
 
 	if (!capable(CAP_SYS_ADMIN)) {
-		if ((tmp.close_delay != port->close_delay) ||
-		    (tmp.closing_wait != port->closing_wait) ||
+		if ((tmp.close_delay != port->port.close_delay) ||
+		    (tmp.closing_wait != port->port.closing_wait) ||
 		    ((tmp.flags & ~ASYNC_USR_MASK) !=
 		     (port->port.flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
@@ -1305,8 +1305,8 @@ static int rc_set_serial_info(struct riscom_port *port,
 	} else  {
 		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
 			       (tmp.flags & ASYNC_FLAGS));
-		port->close_delay = tmp.close_delay;
-		port->closing_wait = tmp.closing_wait;
+		port->port.close_delay = tmp.close_delay;
+		port->port.closing_wait = tmp.closing_wait;
 	}
 	if (change_speed)  {
 		unsigned long flags;
@@ -1331,8 +1331,8 @@ static int rc_get_serial_info(struct riscom_port *port,
 	tmp.irq  = bp->irq;
 	tmp.flags = port->port.flags;
 	tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
-	tmp.close_delay = port->close_delay * HZ/100;
-	tmp.closing_wait = port->closing_wait * HZ/100;
+	tmp.close_delay = port->port.close_delay * HZ/100;
+	tmp.closing_wait = port->port.closing_wait * HZ/100;
 	tmp.xmit_fifo_size = CD180_NFIFO;
 	return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
 }
@@ -1549,10 +1549,8 @@ static int __init rc_init_drivers(void)
 	}
 	memset(rc_port, 0, sizeof(rc_port));
 	for (i = 0; i < RC_NPORT * RC_NBOARD; i++)  {
-		rc_port[i].magic = RISCOM8_MAGIC;
-		rc_port[i].close_delay = 50 * HZ / 100;
-		rc_port[i].closing_wait = 3000 * HZ / 100;
 		tty_port_init(&rc_port[i].port);
+		rc_port[i].magic = RISCOM8_MAGIC;
 	}
 	return 0;
 }

drivers/char/riscom8.h

@@ -69,14 +69,12 @@ struct riscom_port {
 	struct			tty_port port;
 	int			baud_base;
 	int			timeout;
-	int			close_delay;
 	int			custom_divisor;
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
 	short			wakeup_chars;
 	short			break_length;
-	unsigned short		closing_wait;
 	unsigned char		mark_mask;
 	unsigned char		IER;
 	unsigned char		MSVR;