---

yaml
---
r: 316115
b: refs/heads/master
c: d14b7a4
h: refs/heads/master
i:
  316113: 4668998
  316111: ff8ca53
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a58b3a4aba2fd5c445d9deccc73192bff48b591d
+refs/heads/master: d14b7a419a664cd7c1c585c9e7fffee9e9051d53

trunk/.mailmap

@@ -111,5 +111,8 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
+Gustavo Padovan <gustavo@las.ic.unicamp.br>
+Gustavo Padovan <padovan@profusion.mobi>

trunk/Documentation/ABI/testing/sysfs-block-rssd

@@ -1,18 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Allocated
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:   This is a read-only file. Indicates the status of the device.
+Description:    This is a read-only file. Indicates the status of the device.

trunk/Documentation/ABI/testing/sysfs-bus-fcoe

@@ -0,0 +1,77 @@
+What:		/sys/bus/fcoe/ctlr_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE Controller' instances on the fcoe bus
+Attributes:
+
+	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
+			  this value will change the dev_loss_tmo for all
+			  FCFs discovered by this controller.
+
+	lesb_link_fail:   Link Error Status Block (LESB) link failure count.
+
+	lesb_vlink_fail:  Link Error Status Block (LESB) virtual link
+			  failure count.
+
+	lesb_miss_fka:    Link Error Status Block (LESB) missed FCoE
+			  Initialization Protocol (FIP) Keep-Alives (FKA).
+
+	lesb_symb_err:    Link Error Status Block (LESB) symbolic error count.
+
+	lesb_err_block:   Link Error Status Block (LESB) block error count.
+
+	lesb_fcs_error:   Link Error Status Block (LESB) Fibre Channel
+			  Serivces error count.
+
+Notes: ctlr_X (global increment starting at 0)
+
+What:		/sys/bus/fcoe/fcf_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
+		Forwarder, which is a FCoE switch that can accept FCoE
+		(Ethernet) packets, unpack them, and forward the embedded
+		Fibre Channel frames into a FC fabric. It can also take
+		outbound FC frames and pack them in Ethernet packets to
+		be sent to their destination on the Ethernet segment.
+Attributes:
+
+	fabric_name: Identifies the fabric that the FCF services.
+
+	switch_name: Identifies the FCF.
+
+	priority:    The switch's priority amongst other FCFs on the same
+		     fabric.
+
+	selected:    1 indicates that the switch has been selected for use;
+		     0 indicates that the swich will not be used.
+
+	fc_map:      The Fibre Channel MAP
+
+	vfid:	     The Virtual Fabric ID
+
+	mac:         The FCF's MAC address
+
+	fka_peroid:  The FIP Keep-Alive peroid
+
+	fabric_state: The internal kernel state
+		      "Unknown" - Initialization value
+		      "Disconnected" - No link to the FCF/fabric
+		      "Connected" - Host is connected to the FCF
+		      "Deleted" - FCF is being removed from the system
+
+	dev_loss_tmo: The device loss timeout peroid for this FCF.
+
+Notes: A device loss infrastructre similar to the FC Transport's
+       is present in fcoe_sysfs. It is nice to have so that a
+       link flapping adapter doesn't continually advance the count
+       used to identify the discovered FCF. FCFs will exist in a
+       "Disconnected" state until either the timer expires and the
+       FCF becomes "Deleted" or the FCF is rediscovered and becomes
+       "Connected."
+
+
+Users: The first user of this interface will be the fcoeadm application,
+       which is commonly packaged in the fcoe-utils package.

trunk/Documentation/ABI/testing/sysfs-bus-iio

@@ -219,6 +219,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:	2.635
 Contact:	linux-iio@vger.kernel.org
@@ -298,14 +300,19 @@ Description:
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -316,6 +323,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -330,6 +339,8 @@ Description:
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -338,6 +349,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -346,6 +359,24 @@ Description:
 		normal operation. Y may be suppressed if all outputs are
 		controlled together.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org

trunk/Documentation/ABI/testing/sysfs-bus-rbd

@@ -65,11 +65,11 @@ snap_*
 Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
 -------------------------------------------------------------
 
-id
+snap_id
 
 	The rados internal snapshot id assigned for this snapshot
 
-size
+snap_size
 
 	The size of the image when this snapshot was taken.
 

trunk/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533

@@ -0,0 +1,48 @@
+What:		/sys/class/backlight/<backlight>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the ALS output channel used as input in
+		ALS-current-control mode (0, 1), where
+
+		0 - out_current0 (backlight 0)
+		1 - out_current1 (backlight 1)
+
+What:		/sys/class/backlight/<backlight>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/backlight/<backlight>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this backlight (0, 1).
+
+What:		/sys/class/backlight/<backlight>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/backlight/<backlight>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

trunk/Documentation/ABI/testing/sysfs-class-led-driver-lm3533

@@ -0,0 +1,65 @@
+What:		/sys/class/leds/<led>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the ALS output channel to use as input in
+		ALS-current-control mode (1, 2), where
+
+		1 - out_current1
+		2 - out_current2
+
+What:		/sys/class/leds/<led>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/leds/<led>/falltime
+What:		/sys/class/leds/<led>/risetime
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the pattern generator fall and rise times (0..7), where
+
+		0 - 2048 us
+		1 - 262 ms
+		2 - 524 ms
+		3 - 1.049 s
+		4 - 2.097 s
+		5 - 4.194 s
+		6 - 8.389 s
+		7 - 16.78 s
+
+What:		/sys/class/leds/<led>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this led (0..3).
+
+What:		/sys/class/leds/<led>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/leds/<led>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

trunk/Documentation/ABI/testing/sysfs-class-mtd

@@ -123,3 +123,55 @@ Description:
 		half page, or a quarter page).
 
 		In the case of ECC NOR, it is the ECC block size.
+
+What:		/sys/class/mtd/mtdX/ecc_strength
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Maximum number of bit errors that the device is capable of
+		correcting within each region covering an ecc step.  This will
+		always be a non-negative integer.  Note that some devices will
+		have multiple ecc steps within each writesize region.
+
+		In the case of devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bitflip_threshold
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		This allows the user to examine and adjust the criteria by which
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
+
+		The initial value may be specified by the flash device driver.
+		If not, then the default value is ecc_strength.
+
+		The introduction of this feature brings a subtle change to the
+		meaning of the -EUCLEAN return code.  Previously, it was
+		interpreted to mean simply "one or more bit errors were
+		corrected".  Its new interpretation can be phrased as "a
+		dangerously high number of bit errors were corrected on one or
+		more regions comprising an ecc step".  The precise definition of
+		"dangerously high" can be adjusted by the user with
+		bitflip_threshold.  Users are discouraged from doing this,
+		however, unless they know what they are doing and have intimate
+		knowledge of the properties of their device.  Broadly speaking,
+		bitflip_threshold should be low enough to detect genuine erase
+		block degradation, but high enough to avoid the consequences of
+		a persistent return value of -EUCLEAN on devices where sticky
+		bitflips occur.  Note that if bitflip_threshold exceeds
+		ecc_strength, -EUCLEAN is never returned by the read operations.
+		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+		returned, absent a hard error.
+
+		This is generally applicable only to NAND flash devices with ECC
+		capability.  It is ignored on devices lacking ECC capability;
+		i.e., devices for which ecc_strength is zero.