---

yaml
---
r: 96638
b: refs/heads/master
c: fc99824
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0a3ad00ca09632c6d0675f606276e92bdf1b306c
+refs/heads/master: fc99824c427ed998e3c5e376bd9c640fde1c407c

trunk/Documentation/memory-barriers.txt

@@ -994,7 +994,17 @@ The Linux kernel has eight basic CPU memory barriers:
 	DATA DEPENDENCY	read_barrier_depends()	smp_read_barrier_depends()
 
 
-All CPU memory barriers unconditionally imply compiler barriers.
+All memory barriers except the data dependency barriers imply a compiler
+barrier. Data dependencies do not impose any additional compiler ordering.
+
+Aside: In the case of data dependencies, the compiler would be expected to
+issue the loads in the correct order (eg. `a[b]` would have to load the value
+of b before loading a[b]), however there is no guarantee in the C specification
+that the compiler may not speculate the value of b (eg. is equal to 1) and load
+a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
+problem of a compiler reloading b after having loaded a[b], thus having a newer
+copy of b than a[b]. A consensus has not yet been reached about these problems,
+however the ACCESS_ONCE macro is a good place to start looking.
 
 SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
 systems because it is assumed that a CPU will appear to be self-consistent,

trunk/arch/x86/kernel/acpi/realmode/wakeup.lds.S

@@ -12,11 +12,6 @@ ENTRY(_start)
 
 SECTIONS
 {
-	. = HEADER_OFFSET;
-	.header : {
-		 *(.header)
-	}
-
 	. = 0;
 	.text : {
 		 *(.text*)
@@ -50,6 +45,11 @@ SECTIONS
 		__bss_end = .;
 	}
 
+	. = HEADER_OFFSET;
+	.header : {
+		*(.header)
+	}
+
 	. = ALIGN(16);
 	_end = .;
 

trunk/arch/x86/kernel/ptrace.c

@@ -1303,6 +1303,9 @@ static const struct user_regset_view user_x86_64_view = {
 #define genregs32_get		genregs_get
 #define genregs32_set		genregs_set
 
+#define user_i387_ia32_struct	user_i387_struct
+#define user32_fxsr_struct	user_fxsr_struct
+
 #endif	/* CONFIG_X86_64 */
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1315,13 +1318,13 @@ static const struct user_regset x86_32_regsets[] = {
 	},
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct user_i387_struct) / sizeof(u32),
+		.n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
 		.size = sizeof(u32), .align = sizeof(u32),
 		.active = fpregs_active, .get = fpregs_get, .set = fpregs_set
 	},
 	[REGSET_XFP] = {
 		.core_note_type = NT_PRXFPREG,
-		.n = sizeof(struct user_i387_struct) / sizeof(u32),
+		.n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
 		.size = sizeof(u32), .align = sizeof(u32),
 		.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
 	},

trunk/arch/x86/kernel/setup.c

@@ -12,6 +12,7 @@
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
 
+#ifdef CONFIG_X86_LOCAL_APIC
 unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
 /* Processor that is doing the boot up */
@@ -23,8 +24,9 @@ EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
+#endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
 /*
  * Copy data used in early init routines from the initial arrays to the
  * per cpu data areas.  These arrays then become expendable and the

trunk/arch/x86/kernel/setup_64.c

@@ -951,7 +951,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
 {
 	if (c->x86 == 0x6 && c->x86_model >= 0xf)
-		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 }
 
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)

trunk/arch/x86/kernel/smp.c

@@ -231,7 +231,8 @@ native_smp_call_function_mask(cpumask_t mask,
 	wmb();
 
 	/* Send a message to other CPUs */
-	if (cpus_equal(mask, allbutself))
+	if (cpus_equal(mask, allbutself) &&
+	    cpus_equal(cpu_online_map, cpu_callout_map))
 		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
 	else
 		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);

trunk/arch/x86/kernel/smpboot.c

@@ -86,6 +86,7 @@ void *x86_bios_cpu_apicid_early_ptr;
 
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
+static int low_mappings;
 #endif
 
 /* State of each CPU */
@@ -326,6 +327,12 @@ static void __cpuinit start_secondary(void *unused)
 		enable_8259A_irq(0);
 	}
 
+#ifdef CONFIG_X86_32
+	while (low_mappings)
+		cpu_relax();
+	__flush_tlb_all();
+#endif
+
 	/* This must be done before setting cpu_online_map */
 	set_cpu_sibling_map(raw_smp_processor_id());
 	wmb();
@@ -1040,14 +1047,20 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 #ifdef CONFIG_X86_32
 	/* init low mem mapping */
 	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-			min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+		min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
 	flush_tlb_all();
-#endif
+	low_mappings = 1;
 
 	err = do_boot_cpu(apicid, cpu);
-	if (err < 0) {
+
+	zap_low_mappings();
+	low_mappings = 0;
+#else
+	err = do_boot_cpu(apicid, cpu);
+#endif
+	if (err) {
 		Dprintk("do_boot_cpu failed %d\n", err);
-		return err;
+		return -EIO;
 	}
 
 	/*
@@ -1259,9 +1272,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 #endif
 	check_nmi_watchdog();
-#ifdef CONFIG_X86_32
-	zap_low_mappings();
-#endif
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

trunk/arch/x86/kernel/x8664_ksyms_64.c

@@ -2,6 +2,7 @@
    All C exports should go in the respective C files. */
 
 #include <linux/module.h>
+#include <net/checksum.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -29,6 +30,8 @@ EXPORT_SYMBOL(__copy_from_user_inatomic);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 
+EXPORT_SYMBOL(csum_partial);
+
 /*
  * Export string functions. We normally rely on gcc builtin for most of these,
  * but gcc sometimes decides not to inline them.

trunk/arch/x86/lib/csum-partial_64.c

@@ -136,8 +136,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
 						(__force u32)sum);
 }
 
-EXPORT_SYMBOL(csum_partial);
-
 /*
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c

trunk/arch/x86/mm/init_32.c

@@ -438,8 +438,6 @@ void zap_low_mappings(void)
 {
 	int i;
 
-	save_pg_dir();
-
 	/*
 	 * Zap initial low-memory mappings.
 	 *
@@ -663,16 +661,8 @@ void __init mem_init(void)
 		test_wp_bit();
 
 	cpa_init();
-
-	/*
-	 * Subtle. SMP is doing it's boot stuff late (because it has to
-	 * fork idle threads) - but it also needs low mappings for the
-	 * protected-mode entry to work. We zap these entries only after
-	 * the WP-bit has been tested.
-	 */
-#ifndef CONFIG_SMP
+	save_pg_dir();
 	zap_low_mappings();
-#endif
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG

trunk/arch/x86/mm/pat.c

@@ -555,7 +555,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
 			current->comm, current->pid,
 			cattr_name(flags),
-			offset, offset + size);
+			offset, (unsigned long long)(offset + size));
 		return 0;
 	}
 
@@ -576,7 +576,7 @@ void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 		"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
 			current->comm, current->pid,
 			cattr_name(want_flags),
-			addr, addr + size,
+			addr, (unsigned long long)(addr + size),
 			cattr_name(flags));
 	}
 }

trunk/drivers/base/memory.c

@@ -53,11 +53,13 @@ int register_memory_notifier(struct notifier_block *nb)
 {
         return blocking_notifier_chain_register(&memory_chain, nb);
 }
+EXPORT_SYMBOL(register_memory_notifier);
 
 void unregister_memory_notifier(struct notifier_block *nb)
 {
         blocking_notifier_chain_unregister(&memory_chain, nb);
 }
+EXPORT_SYMBOL(unregister_memory_notifier);
 
 /*
  * register_memory - Setup a sysfs device for a memory block

trunk/drivers/net/Kconfig

@@ -2426,7 +2426,7 @@ config CHELSIO_T3
 
 config EHEA
 	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM
+	depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG
 	select INET_LRO
 	---help---
 	  This driver supports the IBM pSeries eHEA ethernet adapter.