---

yaml
---
r: 13685
b: refs/heads/master
c: 54b7924
h: refs/heads/master
i:
  13683: a87d82a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3b44f137b9a846c5452d9e6e1271b79b1dbcc942
+refs/heads/master: 54b79248b24610663298e122c6ba3804468271fe

trunk/Documentation/connector/cn_test.c

@@ -25,7 +25,7 @@
 #include <linux/skbuff.h>
 #include <linux/timer.h>
 
-#include <linux/connector.h>
+#include "connector.h"
 
 static struct cb_id cn_test_id = { 0x123, 0x456 };
 static char cn_test_name[] = "cn_test";
@@ -104,7 +104,7 @@ static int cn_test_want_notify(void)
 	req->first = cn_test_id.val + 20;
 	req->range = 10;
 
-	NETLINK_CB(skb).dst_group = ctl->group;
+	NETLINK_CB(skb).dst_groups = ctl->group;
 	//netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
 	netlink_unicast(nls, skb, 0, 0);
 

trunk/Documentation/dvb/bt8xx.txt

@@ -1,5 +1,5 @@
-How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
-==========================================================================
+How to get the Nebula, PCTV and Twinhan DST cards working
+=========================================================
 
 This class of cards has a bt878a as the PCI interface, and
 require the bttv driver.
@@ -26,31 +26,27 @@ Furthermore you need to enable
 
 In general you need to load the bttv driver, which will handle the gpio and
 i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
-FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
-automatically by the dvb-bt8xx device driver.
+The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
+TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
 
-3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
----------------------------------------------
+3a) Nebula / Pinnacle PCTV
+--------------------------
 
    $ modprobe bttv (normally bttv is being loaded automatically by kmod)
-   $ modprobe dvb-bt8xx
-
-(or just place dvb-bt8xx in /etc/modules for automatic loading)
+   $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
 
 
 3b) TwinHan and Clones
 --------------------------
 
-   $ modprobe bttv card=0x71
+   $ modprobe bttv i2c_hw=1 card=0x71
    $ modprobe dvb-bt8xx
    $ modprobe dst
 
 The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which  is necessary for TwinHan cards. Omission of this parameter might result
-in a system lockup.
+which  is necessary for TwinHan cards.
 
-If you're having an older card (blue color PCB) and card=0x71 locks up
+If you're having an older card (blue color circuit) and card=0x71 locks
 your machine, try using 0x68, too. If that does not work, ask on the
 mailing list.
 
@@ -68,47 +64,11 @@ verbose=0 means complete disabling of messages
 dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
 0x20 means it has a Conditional Access slot.
 
-The autodetected values are determined by the cards 'response string'
-which you can see in your logs e.g.
+The autodected values are determined bythe cards 'response
+string' which you can see in your logs e.g.
 
 dst_get_device_id: Recognise [DSTMCI]
 
-If you need to sent in bug reports on the dst, please do send in a complete
-log with the verbose=4 module parameter. For general usage, the default setting
-of verbose=1 is ideal.
-
-
-4) Multiple cards
---------------------------
-
-If you happen to be running multiple cards, it would be advisable to load
-the bttv module with the card id. This would help to solve any module loading
-problems that you might face.
-
-For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
-
-	$ modprobe bttv card=0x71 card=0x87
-
-Here the order of the card id is important and should be the same as that of the
-physical order of the cards. Here card=0x71 represents the Twinhan and clones
-and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
-specified in decimal, rather than hex:
-
-	$ modprobe bttv card=113 card=135
-
-Some examples of card-id's
-
-Pinnacle Sat		0x5e  (94)
-Nebula Digi TV		0x68  (104)
-PC HDTV			0x70  (112)
-Twinhan			0x71  (113)
-FusionHDTV DVB-T Lite	0x80  (128)
-FusionHDTV5 Lite	0x87  (135)
-
-For a full list of card-id's, see the V4L Documentation within the kernel
-source:  linux/Documentation/video4linux/CARDLIST.bttv
-
-If you have problems with this please do ask on the mailing list.
 
 --
 Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham

trunk/Documentation/dvb/cards.txt

@@ -41,12 +41,6 @@ o Frontends drivers:
    - dib3000mb	: DiBcom 3000-MB demodulator
   DVB-S/C/T:
    - dst		: TwinHan DST Frontend
-  ATSC:
-   - nxt200x		: Nxtwave NXT2002 & NXT2004
-   - or51211		: or51211 based (pcHDTV HD2000 card)
-   - or51132		: or51132 based (pcHDTV HD3000 card)
-   - bcm3510		: Broadcom BCM3510
-   - lgdt330x		: LG Electronics DT3302 & DT3303
 
 
 o Cards based on the Phillips saa7146 multimedia PCI bridge chip:
@@ -68,10 +62,6 @@ o Cards based on the Conexant Bt8xx PCI bridge:
   - Nebula Electronics DigiTV
   - TwinHan DST
   - Avermedia DVB-T
-  - ChainTech digitop DST-1000 DVB-S
-  - pcHDTV HD-2000 TV
-  - DViCO FusionHDTV DVB-T Lite
-  - DViCO FusionHDTV5 Lite
 
 o Technotrend / Hauppauge DVB USB devices:
   - Nova USB
@@ -93,30 +83,3 @@ o DiBcom DVB-T USB based devices:
   - DiBcom USB2.0 DVB-T reference device (non-public)
 
 o Experimental support for the analog module of the Siemens DVB-C PCI card
-
-o Cards based on the Conexant cx2388x PCI bridge:
-  - ADS Tech Instant TV DVB-T PCI
-  - ATI HDTV Wonder
-  - digitalnow DNTV Live! DVB-T
-  - DViCO FusionHDTV DVB-T1
-  - DViCO FusionHDTV DVB-T Plus
-  - DViCO FusionHDTV3 Gold-Q
-  - DViCO FusionHDTV3 Gold-T
-  - DViCO FusionHDTV5 Gold
-  - Hauppauge Nova-T DVB-T
-  - KWorld/VStream XPert DVB-T
-  - pcHDTV HD3000 HDTV
-  - TerraTec Cinergy 1400 DVB-T
-  - WinFast DTV1000-T
-
-o Cards based on the Phillips saa7134 PCI bridge:
-  - Medion 7134
-  - Pinnacle PCTV 300i DVB-T + PAL
-  - LifeView FlyDVB-T DUO
-  - Typhoon DVB-T Duo Digital/Analog Cardbus
-  - Philips TOUGH DVB-T reference design
-  - Philips EUROPA V3 reference design
-  - Compro Videomate DVB-T300
-  - Compro Videomate DVB-T200
-  - AVerMedia AVerTVHD MCE A180
-

trunk/Documentation/dvb/contributors.txt

@@ -75,22 +75,5 @@ Ernst Peinlich <e.peinlich@inode.at>
 Peter Beutner <p.beutner@gmx.net>
   for the IR code for the ttusb-dec driver
 
-Wilson Michaels <wilsonmichaels@earthlink.net>
-  for the lgdt330x frontend driver, and various bugfixes
-
-Michael Krufky <mkrufky@m1k.net>
-  for maintaining v4l/dvb inter-tree dependencies
-
-Taylor Jacob <rtjacob@earthlink.net>
-  for the nxt2002 frontend driver
-
-Jean-Francois Thibert <jeanfrancois@sagetv.com>
-  for the nxt2004 frontend driver
-
-Kirk Lapray <kirk.lapray@gmail.com>
-  for the or51211 and or51132 frontend drivers, and
-  for merging the nxt2002 and nxt2004 modules into a
-  single nxt200x frontend driver.
-
 (If you think you should be in this list, but you are not, drop a
  line to the DVB mailing list)

trunk/Documentation/dvb/get_dvb_firmware

@@ -22,7 +22,7 @@ use File::Temp qw/ tempdir /;
 use IO::Handle;
 
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
-		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002",
 		"or51211", "or51132_qam", "or51132_vsb");
 
 # Check args
@@ -252,23 +252,6 @@ sub nxt2002 {
     $outfile;
 }
 
-sub nxt2004 {
-    my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
-    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
-    my $hash = "111cb885b1e009188346d72acfed024c";
-    my $outfile = "dvb-fe-nxt2004.fw";
-    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
-
-    checkstandard();
-
-    wgetfile($sourcefile, $url);
-    unzip($sourcefile, $tmpdir);
-    verify("$tmpdir/3xHybrid.sys", $hash);
-    extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile);
-
-    $outfile;
-}
-
 sub or51211 {
     my $fwfile = "dvb-fe-or51211.fw";
     my $url = "http://linuxtv.org/downloads/firmware/$fwfile";