Merge branch 'wireless-next' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/luca/wl12xx

MAINTAINERS

@@ -6321,7 +6321,7 @@ WL1271 WIRELESS DRIVER
 M:	Luciano Coelho <luciano.coelho@nokia.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
 F:	drivers/net/wireless/wl12xx/wl1271*
 F:	include/linux/wl12xx.h

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -213,7 +213,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "wl1271",
 		.mmc		= 3,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 		.nonremovable	= true,

drivers/net/wireless/wl12xx/wl1271.h

@@ -117,10 +117,7 @@ enum {
 #define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
 #define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
 
-/*
- * Enable/disable 802.11a support for WL1273
- */
-#undef WL1271_80211A_ENABLED
+#define WL1271_CIPHER_SUITE_GEM 0x00147201
 
 #define WL1271_BUSY_WORD_CNT 1
 #define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
@@ -133,6 +130,8 @@ enum {
 
 #define ACX_TX_DESCRIPTORS         32
 
+#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
+
 enum wl1271_state {
 	WL1271_STATE_OFF,
 	WL1271_STATE_ON,
@@ -301,6 +300,7 @@ struct wl1271_rx_mem_pool_addr {
 struct wl1271_scan {
 	struct cfg80211_scan_request *req;
 	bool *scanned_ch;
+	bool failed;
 	u8 state;
 	u8 ssid[IW_ESSID_MAX_SIZE+1];
 	size_t ssid_len;
@@ -350,6 +350,7 @@ struct wl1271 {
 #define WL1271_FLAG_IDLE              (10)
 #define WL1271_FLAG_IDLE_REQUESTED    (11)
 #define WL1271_FLAG_PSPOLL_FAILURE    (12)
+#define WL1271_FLAG_STA_STATE_SENT    (13)
 	unsigned long flags;
 
 	struct wl1271_partition_set part;
@@ -362,6 +363,7 @@ struct wl1271 {
 	u8 *fw;
 	size_t fw_len;
 	struct wl1271_nvs_file *nvs;
+	size_t nvs_len;
 
 	s8 hw_pg_ver;
 
@@ -408,9 +410,15 @@ struct wl1271 {
 	/* Rx memory pool address */
 	struct wl1271_rx_mem_pool_addr rx_mem_pool_addr;
 
+	/* Intermediate buffer, used for packet aggregation */
+	u8 *aggr_buf;
+
 	/* The target interrupt mask */
 	struct work_struct irq_work;
 
+	/* Hardware recovery work */
+	struct work_struct recovery_work;
+
 	/* The mbox event mask */
 	u32 event_mask;
 
@@ -419,6 +427,7 @@ struct wl1271 {
 
 	/* Are we currently scanning */
 	struct wl1271_scan scan;
+	struct delayed_work scan_complete_work;
 
 	/* Our association ID */
 	u16 aid;
@@ -475,6 +484,8 @@ struct wl1271 {
 
 	bool sg_enabled;
 
+	bool enable_11a;
+
 	struct list_head list;
 
 	/* Most recently reported noise in dBm */
@@ -498,14 +509,4 @@ int wl1271_plt_stop(struct wl1271 *wl);
 #define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
-static inline bool wl1271_11a_enabled(void)
-{
-	/* FIXME: this could be determined based on the NVS-INI file */
-#ifdef WL1271_80211A_ENABLED
-	return true;
-#else
-	return false;
-#endif
-}
-
 #endif

drivers/net/wireless/wl12xx/wl1271_acx.c

@@ -86,40 +86,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
 	return ret;
 }
 
-int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len)
-{
-	struct acx_revision *rev;
-	int ret;
-
-	wl1271_debug(DEBUG_ACX, "acx fw rev");
-
-	rev = kzalloc(sizeof(*rev), GFP_KERNEL);
-	if (!rev) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	ret = wl1271_cmd_interrogate(wl, ACX_FW_REV, rev, sizeof(*rev));
-	if (ret < 0) {
-		wl1271_warning("ACX_FW_REV interrogate failed");
-		goto out;
-	}
-
-	/* be careful with the buffer sizes */
-	strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
-
-	/*
-	 * if the firmware version string is exactly
-	 * sizeof(rev->fw_version) long or fw_len is less than
-	 * sizeof(rev->fw_version) it won't be null terminated
-	 */
-	buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
-
-out:
-	kfree(rev);
-	return ret;
-}
-
 int wl1271_acx_tx_power(struct wl1271 *wl, int power)
 {
 	struct acx_current_tx_power *acx;

drivers/net/wireless/wl12xx/wl1271_acx.h

@@ -100,35 +100,6 @@ struct acx_error_counter {
 	__le32 seq_num_miss;
 } __packed;
 
-struct acx_revision {
-	struct acx_header header;
-
-	/*
-	 * The WiLink firmware version, an ASCII string x.x.x.x,
-	 * that uniquely identifies the current firmware.
-	 * The left most digit is incremented each time a
-	 * significant change is made to the firmware, such as
-	 * code redesign or new platform support.
-	 * The second digit is incremented when major enhancements
-	 * are added or major fixes are made.
-	 * The third digit is incremented for each GA release.
-	 * The fourth digit is incremented for each build.
-	 * The first two digits identify a firmware release version,
-	 * in other words, a unique set of features.
-	 * The first three digits identify a GA release.
-	 */
-	char fw_version[20];
-
-	/*
-	 * This 4 byte field specifies the WiLink hardware version.
-	 * bits 0  - 15: Reserved.
-	 * bits 16 - 23: Version ID - The WiLink version ID
-	 *              (1 = first spin, 2 = second spin, and so on).
-	 * bits 24 - 31: Chip ID - The WiLink chip ID.
-	 */
-	__le32 hw_version;
-} __packed;
-
 enum wl1271_psm_mode {
 	/* Active mode */
 	WL1271_PSM_CAM = 0,
@@ -1060,7 +1031,6 @@ enum {
 	ACX_PEER_HT_CAP             = 0x0057,
 	ACX_HT_BSS_OPERATION        = 0x0058,
 	ACX_COEX_ACTIVITY           = 0x0059,
-	ACX_SET_SMART_REFLEX_DEBUG  = 0x005A,
 	ACX_SET_DCO_ITRIM_PARAMS    = 0x0061,
 	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
 	DOT11_CUR_TX_PWR            = 0x100D,
@@ -1077,7 +1047,6 @@ enum {
 
 int wl1271_acx_wake_up_conditions(struct wl1271 *wl);
 int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth);
-int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len);
 int wl1271_acx_tx_power(struct wl1271 *wl, int power);
 int wl1271_acx_feature_cfg(struct wl1271 *wl);
 int wl1271_acx_mem_map(struct wl1271 *wl,

drivers/net/wireless/wl12xx/wl1271_boot.c

@@ -225,6 +225,28 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	if (wl->nvs == NULL)
 		return -ENODEV;
 
+	/*
+	 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
+	 * configurations) can be removed when those NVS files stop floating
+	 * around.
+	 */
+	if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
+	    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
+		if (wl->nvs->general_params.dual_mode_select)
+			wl->enable_11a = true;
+	}
+
+	if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
+	    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
+	     wl->enable_11a)) {
+		wl1271_error("nvs size is not as expected: %zu != %zu",
+			     wl->nvs_len, sizeof(struct wl1271_nvs_file));
+		kfree(wl->nvs);
+		wl->nvs = NULL;
+		wl->nvs_len = 0;
+		return -EILSEQ;
+	}
+
 	/* only the first part of the NVS needs to be uploaded */
 	nvs_len = sizeof(wl->nvs->nvs);
 	nvs_ptr = (u8 *)wl->nvs->nvs;
@@ -251,8 +273,10 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 		burst_len = nvs_ptr[0];
 		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
 
-		/* FIXME: Due to our new wl1271_translate_reg_addr function,
-		   we need to add the REGISTER_BASE to the destination */
+		/*
+		 * Due to our new wl1271_translate_reg_addr function,
+		 * we need to add the REGISTER_BASE to the destination
+		 */
 		dest_addr += REGISTERS_BASE;
 
 		/* We move our pointer to the data */
@@ -280,8 +304,6 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 			ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
 	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
 
-	/* FIXME: The driver sets the partition here, but this is not needed,
-	   since it sets to the same one as currently in use */
 	/* Now we must set the partition correctly */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
@@ -291,9 +313,6 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 		return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
-	/* FIXME: In wl1271, we upload everything at once.
-	   No endianness handling needed here?! The ref driver doesn't do
-	   anything about it at this point */
 	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
 
 	kfree(nvs_aligned);
@@ -491,10 +510,7 @@ int wl1271_boot(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
 
-	pause &= ~(WU_COUNTER_PAUSE_VAL); /* FIXME: This should probably be
-					   * WU_COUNTER_PAUSE_VAL instead of
-					   * 0x3ff (magic number ).  How does
-					   * this work?! */
+	pause &= ~(WU_COUNTER_PAUSE_VAL);
 	pause |= WU_COUNTER_PAUSE_VAL;
 	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
 
@@ -548,7 +564,6 @@ int wl1271_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	/* FIXME: Need to check whether this is really what we want */
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
 		       WL1271_ACX_ALL_EVENTS_VECTOR);