---

yaml
---
r: 123935
b: refs/heads/master
c: 4c21343
h: refs/heads/master
i:
  123933: d0179ef
  123931: 5100c7b
  123927: f5cbcc0
  123919: 44c2ded
  123903: 85b7539
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 07332318f33da6acd88abb762a8b6febdfc560a3
+refs/heads/master: 4c21343005b6b0d6ef24ab6e6a8f3883ff0cb569

trunk/arch/arm/Kconfig

@@ -386,6 +386,7 @@ config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
 	select PCI
+	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION

trunk/arch/arm/mach-kirkwood/include/mach/gpio.h

@@ -0,0 +1,38 @@
+/*
+ * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX		50
+#define GPIO_OFF(pin)		(((pin) >> 5) ? 0x0140 : 0x0100)
+#define GPIO_OUT(pin)		(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_KIRKWOOD_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_KIRKWOOD_GPIO_START;
+}
+
+
+#endif

trunk/arch/arm/mach-kirkwood/include/mach/irqs.h

@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include "kirkwood.h"	/* need GPIO_MAX */
-
 /*
  * Low Interrupt Controller
  */
@@ -57,7 +55,7 @@
  * KIRKWOOD General Purpose Pins
  */
 #define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
+#define NR_GPIO_IRQS		50
 
 #define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
 

trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -117,7 +117,4 @@
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
 
 
-#define GPIO_MAX		50
-
-
 #endif

trunk/arch/arm/mach-kirkwood/irq.c

@@ -13,10 +13,45 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <plat/irq.h>
+#include <asm/gpio.h>
 #include "common.h"
 
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7);
+	BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23);
+
+	orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3);
+}
+
 void __init kirkwood_init_irq(void)
 {
+	int i;
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+	writel(0, GPIO_LEVEL_MASK(32));
+	writel(0, GPIO_EDGE_MASK(32));
+	writel(0, GPIO_EDGE_CAUSE(32));
+
+	for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler);
 }