MSI: Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HT

0x08 is the HT capability, while PCI_CAP_ID_HT_IRQCONF would be the subtype 0x80 that mpic_scan_ht_pic() uses. Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HT. And by the way, use it in the ipath driver instead of defining its own HT_CAPABILITY_ID. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
git-mirror · Sep 27, 2006 · 46ff346 · 46ff346
1 parent fe97064
commit 46ff346
Show file tree

Hide file tree

Showing 3 changed files with 4 additions and 5 deletions.
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
@@ -339,7 +339,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
 	for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0;
 	     pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) {
 		u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
-		if (id == PCI_CAP_ID_HT_IRQCONF) {
+		if (id == PCI_CAP_ID_HT) {
 			id = readb(devbase + pos + 3);
 			if (id == 0x80)
 				break;

diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -742,7 +742,6 @@ static int ipath_setup_ht_reset(struct ipath_devdata *dd)
 	return 0;
 }
 
-#define HT_CAPABILITY_ID   0x08	/* HT capabilities not defined in kernel */
 #define HT_INTR_DISC_CONFIG  0x80	/* HT interrupt and discovery cap */
 #define HT_INTR_REG_INDEX    2	/* intconfig requires indirect accesses */
 
@@ -973,7 +972,7 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd,
 	 * do this early, before we ever enable errors or hardware errors,
 	 * mostly to avoid causing the chip to enter freeze mode.
 	 */
-	pos = pci_find_capability(pdev, HT_CAPABILITY_ID);
+	pos = pci_find_capability(pdev, PCI_CAP_ID_HT);
 	if (!pos) {
 		ipath_dev_err(dd, "Couldn't find HyperTransport "
 			      "capability; no interrupts\n");
@@ -996,7 +995,7 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd,
 		else if (cap_type == HT_INTR_DISC_CONFIG)
 			ihandler = set_int_handler(dd, pdev, pos);
 	} while ((pos = pci_find_next_capability(pdev, pos,
-						 HT_CAPABILITY_ID)));
+						 PCI_CAP_ID_HT)));
 
 	if (!ihandler) {
 		ipath_dev_err(dd, "Couldn't find interrupt handler in "

diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
@@ -196,7 +196,7 @@
 #define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
 #define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
 #define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
-#define  PCI_CAP_ID_HT_IRQCONF	0x08	/* HyperTransport IRQ Configuration */
+#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
 #define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific capability */
 #define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
 #define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */