Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH updates from Paul Mundt:

 - Migration off of old-style dynamic IRQ API.

 - irqdomain and generic irq chip propagation.

 - div4/6 clock consolidation, another step towards co-existing with the
   common struct clk infrastructure.

 - Extensive PFC rework
   - Decoupling GPIO from pin state.
   - Initial pinctrl support to facilitate incremental migration off of
     legacy pinmux.
   - gpiolib support made optional, and made pinctrl-backed.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits)
  sh: pfc: pin config get/set support.
  sh: pfc: Prefer DRV_NAME over KBUILD_MODNAME.
  sh: pfc: pinctrl legacy group support.
  sh: pfc: Ignore pinmux GPIOs with invalid enum IDs.
  sh: pfc: Export pinctrl binding init symbol.
  sh: pfc: Error out on pinctrl init resolution failure.
  sh: pfc: Make pr_fmt consistent across pfc drivers.
  sh: pfc: pinctrl legacy function support.
  sh: pfc: Rudimentary pinctrl-backed GPIO support.
  sh: pfc: Dumb GPIO stringification.
  sh: pfc: Shuffle PFC support core.
  sh: pfc: Verify pin type encoding size at build time.
  sh: pfc: Kill off unused pinmux bias flags.
  sh: pfc: Make gpio chip support optional where possible.
  sh: pfc: Split out gpio chip support.
  sh64: Fix up section mismatch warnings.
  sh64: Attempt to make reserved insn trap handler resemble C.
  sh: Consolidate die definitions for trap handlers.
  sh64: Kill off old exception debugging helpers.
  sh64: Use generic unaligned access control/counters.
  ...

arch/sh/Kconfig

@@ -60,6 +60,7 @@ config SUPERH32
 
 config SUPERH64
 	def_bool ARCH = "sh64"
+	select KALLSYMS
 
 config ARCH_DEFCONFIG
 	string

arch/sh/boards/Kconfig

@@ -44,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	depends on CPU_SUBTYPE_SH7722
 	help
 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
@@ -80,6 +82,8 @@ config SH_7780_SOLUTION_ENGINE
 config SH_7343_SOLUTION_ENGINE
 	bool "SolutionEngine7343"
 	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	depends on CPU_SUBTYPE_SH7343
 	help
 	  Select 7343 SolutionEngine if configuring for a Hitachi
@@ -295,6 +299,7 @@ config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
 	select NO_IOPORT if !PCI
+	select IRQ_DOMAIN
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"

arch/sh/boards/mach-dreamcast/irq.c

@@ -8,10 +8,11 @@
  * This file is part of the LinuxDC project (www.linuxdc.org)
  * Released under the terms of the GNU GPL v2.0
  */
-
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
 #include <mach/sysasic.h>
 
 /*
@@ -141,26 +142,15 @@ int systemasic_irq_demux(int irq)
 
 void systemasic_irq_init(void)
 {
-	int i, nid = cpu_to_node(boot_cpu_data);
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
-		unsigned int irq;
-
-		irq = create_irq_nr(i, nid);
-		if (unlikely(irq == 0)) {
-			pr_err("%s: failed hooking irq %d for systemasic\n",
-			       __func__, i);
-			return;
-		}
+	int irq_base, i;
 
-		if (unlikely(irq != i)) {
-			pr_err("%s: got irq %d but wanted %d, bailing.\n",
-			       __func__, irq, i);
-			destroy_irq(irq);
-			return;
-		}
+	irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+				   HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs\n", __func__);
+		return;
+	}
 
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
 		irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
-	}
 }

arch/sh/boards/mach-se/7343/irq.c

@@ -1,86 +1,129 @@
 /*
- * linux/arch/sh/boards/se/7343/irq.c
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
  *
  * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2012  Paul Mundt
  *
- * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Based on linux/arch/sh/boards/se/7343/irq.c
  * Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl	ioread16
+#define irq_reg_writel	iowrite16
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
+#include <asm/sizes.h>
 #include <mach-se/mach/se7343.h>
 
-unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+#define PA_CPLD_BASE_ADDR	0x11400000
+#define PA_CPLD_ST_REG		0x08	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG	0x0a	/* CPLD Interrupt mask register */
 
-static void disable_se7343_irq(struct irq_data *data)
-{
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
-}
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
 
-static void enable_se7343_irq(struct irq_data *data)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
-}
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
 
-static struct irq_chip se7343_irq_chip __read_mostly = {
-	.name		= "SE7343-FPGA",
-	.irq_mask	= disable_se7343_irq,
-	.irq_unmask	= enable_se7343_irq,
-};
+	chip->irq_mask_ack(data);
 
-static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+	mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+	for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
 {
-	unsigned short intv = __raw_readw(PA_CPLD_ST);
-	unsigned int ext_irq = 0;
+	int i;
 
-	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7343_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
 
-	for (; intv; intv >>= 1, ext_irq++) {
-		if (!(intv & 1))
-			continue;
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7343_irq_domain, i);
 
-		generic_handle_irq(se7343_fpga_irq[ext_irq]);
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
 	}
 }
 
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
+static void __init se7343_gc_init(void)
 {
-	int i, irq;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
 
-	__raw_writew(0, PA_CPLD_IMSK);	/* disable all irqs */
-	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+	irq_base = irq_linear_revmap(se7343_irq_domain, 0);
 
-	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
-		irq = create_irq();
-		if (irq < 0)
-			return;
-		se7343_fpga_irq[i] = irq;
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
 
-		irq_set_chip_and_handler_name(se7343_fpga_irq[i],
-					      &se7343_irq_chip,
-					      handle_level_irq,
-					      "level");
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 
-		irq_set_chip_data(se7343_fpga_irq[i], (void *)i);
-	}
+	ct->regs.mask = PA_CPLD_IMSK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 
 	irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
 }
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+	if (unlikely(!se7343_irq_regs)) {
+		pr_err("Failed to remap CPLD\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	se7343_domain_init();
+	se7343_gc_init();
+}

arch/sh/boards/mach-se/7343/setup.c

@@ -5,6 +5,7 @@
 #include <linux/serial_reg.h>
 #include <linux/usb/isp116x.h>
 #include <linux/delay.h>
+#include <linux/irqdomain.h>
 #include <asm/machvec.h>
 #include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
@@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = {
 static int __init sh7343se_devices_setup(void)
 {
 	/* Wire-up dynamic vectors */
-	serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
-	serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
-
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
 	usb_resources[2].start = usb_resources[2].end =
-		se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
 
 	return platform_add_devices(sh7343se_platform_devices,
 				    ARRAY_SIZE(sh7343se_platform_devices));