---

yaml
---
r: 254392
b: refs/heads/master
c: 35173d5
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 068b2c03635bf50c9b408b21435e23e7a0b89b0f
+refs/heads/master: 35173d579a08c0d145b3020039d3ba33fbf2c184

trunk/drivers/scsi/isci/core/sci_base_port.h

@@ -188,16 +188,4 @@ struct sci_base_port_state_handler {
 	SCI_BASE_PORT_PHY_HANDLER_T remove_phy_handler;
 
 };
-
-/**
- * sci_base_port_construct() - Construct the base port object
- * @this_port: This parameter specifies the base port to be constructed.
- * @state_table: This parameter specifies the table of state definitions to be
- *    utilized for the domain state machine.
- *
- */
-void sci_base_port_construct(
-	struct sci_base_port *this_port,
-	const struct sci_base_state *state_table);
-
 #endif /* _SCI_BASE_PORT_H_ */

trunk/drivers/scsi/isci/core/scic_config_parameters.h

@@ -260,19 +260,6 @@ enum sci_status scic_user_parameters_set(
 	struct scic_sds_controller *controller,
 	union scic_user_parameters *user_parameters);
 
-/**
- * scic_user_parameters_get() - This method allows the user to retrieve the
- *    user parameters utilized by the controller.
- * @controller: This parameter specifies the controller on which to set the
- *    user parameters.
- * @user_parameters: This parameter specifies the USER_PARAMETERS object into
- *    which the framework shall save it's parameters.
- *
- */
-void scic_user_parameters_get(
-	struct scic_sds_controller *controller,
-	union scic_user_parameters *user_parameters);
-
 /**
  * scic_oem_parameters_set() - This method allows the user to attempt to change
  *    the OEM parameters utilized by the controller.

trunk/drivers/scsi/isci/core/scic_io_request.h

@@ -325,7 +325,7 @@ enum sci_status scic_io_request_construct(
 	struct scic_sds_remote_device *scic_remote_device,
 	u16 io_tag,
 	void *user_io_request_object,
-	void *scic_io_request_memory,
+	struct scic_sds_request *scic_io_request_memory,
 	struct scic_sds_request **new_scic_io_request_handle);
 
 /**

trunk/drivers/scsi/isci/core/scic_port.h

@@ -56,14 +56,6 @@
 #ifndef _SCIC_PORT_H_
 #define _SCIC_PORT_H_
 
-/**
- * This file contains all of the interface methods that can be called by an SCI
- *    Core user on a SAS or SATA port.
- *
- *
- */
-
-
 #include "sci_status.h"
 #include "intel_sas.h"
 
@@ -78,118 +70,28 @@ enum SCIC_PORT_NOT_READY_REASON_CODE {
 	SCIC_PORT_NOT_READY_REASON_CODE_MAX
 };
 
-/**
- * struct scic_port_end_point_properties - This structure defines the
- *    properties that can be retrieved for each end-point local or remote
- *    (attached) port in the controller.
- *
- *
- */
 struct scic_port_end_point_properties {
-	/**
-	 * This field indicates the SAS address for the associated end
-	 * point in the port.
-	 */
 	struct sci_sas_address sas_address;
-
-	/**
-	 * This field indicates the protocols supported by the associated
-	 * end-point in the port.
-	 */
 	struct sci_sas_identify_address_frame_protocols protocols;
 
 };
 
-/**
- * struct scic_port_properties - This structure defines the properties that can
- *    be retrieved for each port in the controller.
- *
- *
- */
 struct scic_port_properties {
-	/**
-	 * This field specifies the logical index of the port (0 relative).
-	 */
 	u32 index;
-
-	/**
-	 * This field indicates the local end-point properties for port.
-	 */
 	struct scic_port_end_point_properties local;
-
-	/**
-	 * This field indicates the remote (attached) end-point properties
-	 * for the port.
-	 */
 	struct scic_port_end_point_properties remote;
-
-	/**
-	 * This field specifies the phys contained inside the port.
-	 */
 	u32 phy_mask;
-
 };
 
-/**
- * scic_port_get_properties() - This method simply returns the properties
- *    regarding the port, such as: physical index, protocols, sas address, etc.
- * @port: this parameter specifies the port for which to retrieve the physical
- *    index.
- * @properties: This parameter specifies the properties structure into which to
- *    copy the requested information.
- *
- * Indicate if the user specified a valid port. SCI_SUCCESS This value is
- * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This
- * value is returned if the specified port is not valid.  When this value is
- * returned, no data is copied to the properties output parameter.
- */
 enum sci_status scic_port_get_properties(
 	struct scic_sds_port *port,
 	struct scic_port_properties *properties);
 
-/**
- * scic_port_stop() - This method will make the port no longer ready for
- *    operation.  After invoking this method IO operation is not possible.
- * @port: This parameter specifies the port to be stopped.
- *
- * Indicate if the port was successfully stopped. SCI_SUCCESS This value is
- * returned if the port was successfully stopped. SCI_WARNING_ALREADY_IN_STATE
- * This value is returned if the port is already stopped or in the process of
- * stopping. SCI_FAILURE_INVALID_PORT This value is returned if the supplied
- * port is not valid. SCI_FAILURE_INVALID_STATE This value is returned if a
- * stop operation can't be completed due to the state of port.
- */
-enum sci_status scic_port_stop(
-	struct scic_sds_port *port);
-
-/**
- * scic_port_hard_reset() - This method will request the SCI implementation to
- *    perform a HARD RESET on the SAS Port.  If/When the HARD RESET completes
- *    the SCI user will be notified via an SCI OS callback indicating a direct
- *    attached device was found.
- * @port: a handle corresponding to the SAS port to be hard reset.
- * @reset_timeout: This parameter specifies the number of milliseconds in which
- *    the port reset operation should complete.
- *
- * The SCI User callback in SCIC_USER_CALLBACKS_T will only be called once for
- * each phy in the SAS Port at completion of the hard reset sequence. Return a
- * status indicating whether the hard reset started successfully. SCI_SUCCESS
- * This value is returned if the hard reset operation started successfully.
- */
 enum sci_status scic_port_hard_reset(
 	struct scic_sds_port *port,
 	u32 reset_timeout);
 
-/**
- * scic_port_enable_broadcast_change_notification() - This API method enables
- *    the broadcast change notification from underneath hardware.
- * @port: The port upon which broadcast change notifications (BCN) are to be
- *    enabled.
- *
- */
 void scic_port_enable_broadcast_change_notification(
 	struct scic_sds_port *port);
 
-
 #endif  /* _SCIC_PORT_H_ */
-